LS901-E
Product structure Power Adaptor Socket Broadband Interface LAN Light Reset Button WAN Light Power Adaptor Internet Cable
Before using 1 Open Broadband Service Open standard broadband service,such as telecommunication, Great Wall, Unicom, Railcom 2 Environmental Requirements of Area Network PC automatically connect to the network via router, User can enter into base station installation steps directly. PC not connect to the network via router, User can buy a router, refer to the user manual to set up the router to autodial and connect to the network. Unable to distinguish whether PC connect to the network via router.
Install data bridge 1 Use power adaptor to connect power source and bridge. 2 Use internet cable to connect bridge with LAN interface of the router. 3 When WAN and LAN light on the bridge turns green, which indicates the connection is successful. Caution To prevent the product hurting people during using and prolong product lifetime, please follow below rules. Symbol Meaning Regular instruction Forbidden Disassemble forbidden About battery use Avoid the water, dust and others on the adapter.
Product instruction Please keep your hands dry to install the data bridge. Data bridge will cache data due to network problem. 1 Using the wet clothing to remove the dirt on the product. Please turn off the power and network during a lightning storm. Data bridge only applies to Lifesense dedicated power adaptor, please don’t use other type. For unprofessional person, please don’t teardown it alone. About product daily maintenance Please put the data bridge at cool and dry place.
Trouble shooting Symptom Advanced setting Fault cause Solution (Attention: only for user whose DHCP function on router wasn’t open) Please check the power connecting situation of the data bridge Turn on power, LAN and WAN light is dark Power connecting error Turn on power, LAN and WAN light is shining Data bridge connect to the router is abnormal LAN lights up, WAN is shining PC can enter the internet 1) If DHCP function on router was open, press But bridge can’t enter reset button for a moment on
3 Setting up the network on PC and save, pls refer to below image: 5 If setting up is successful, below interface will shown. 6 If setting up is fail, below interface will shown: 4 Open IE browser, put http://192.168.1.2/ into the address column, enter into the address, below interface will shown. If choose automatically get IP address, for DNS address we can choose automatically or manually put in. If choose manually put in IP address, for DNS address we have to manually put in accordingly.
Specifications Solution Product name Product dimension Product Weight Display Internet cable Power Parameter Normal working condition Temperature: LS901-E Storage & transportation condition Temperature: 100 x 58 x 24mm Working atmospheric pressure 80kPa ~ 105kPa 62g Storage & transportation atmospheric pressure 80kPa ~ 105kPa 2 green LED light 1m, with RJ45 socket DC 5.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.