version:1.0 User Manual Lifesense Band 2 LS417-F Thank you very much for selecting Lifesense Band 2 LS417-F. Guangdong Transtek Medical Electronics Co., Ltd. Zone A, No.105 ,Dongli Road, Torch Development District, Zhongshan,528437,Guangdong,China TEL:86-760-88282982 www.transtek.cn Please do read the user manual carefully and thoroughly so as to ensure the safe usage of this product, and keep the manual well for further reference in case you have problems.
Table of Contents Symbol Meaning Symbol Meaning OLED Display Table of Contents ................................................................................................................. 2 ................................................................................................................. 2 Overview General Instructions ................................................................................................................. 3 Device Components ...................................
Symbol Meaning Overview General Instructions Symbol Meaning The warning signs and symbols are essential to ensure your correct and safe use of this product and protect you and others from injury.
Initial Start-Up Initial Start-Up Activate the Lifesense Band 2 For the initial use, tap the touch key to light up the Lifesense Band 2. “Open App to Connect” appears on the screen for 10 seconds and then turns off. Please activate it by connecting it with the app during 30 minutes, otherwise, it will return to shipping mode automatically and only support touch light up function, displaying “Open App to Connect”.
Initial Start-Up Initial Start-Up Battery Charging Tie the wristband Must make the touch key towards to the inner side of body. The heart rate sensor must be close to the skin. The distance between wristband and wrist should be 2 cm or more. When the OLED displays the following symbol, it reminds you the battery is used up, you need to charge the power at once. 9:25 THU ≥2cm When the OLED displays the following symbol, it reminds you the battery is low, you need to charge the power.
Start Measuring View the Data Light It up Check the Data Light up the Lifesense Band 2 as the below steps: 9:25 Following the steps of LIGHT IT UP to read the data you want. 18 THU Tap the touch key at any time to light up the Lifesense Band 2, it will display the time first. Tap the touch key each time, it will display the data according to the following order: time, steps and goal completion, heart rate, distance and calorie alternately. If there is no operation, it will turn off in 5 seconds.
Special Function Special Function Alarms Text Notification Please set the Silent Alarms on the app. When the setting time is coming, it will display the alarm clock icon and vibrate continuously. Tap the touch key to stop the alarm clock, or the alarm clock will stop vibrating until it’s over the duration of the setting time. You can set the alarm clock to vibrate 5 seconds,15 seconds, 30 seconds, or 60 seconds on the app. 14:20 You can set the Text Notification on the app.
Special Function Special Function Night Mode The default state of night mode is OFF. You can set it on or off, and the starting and ending time on the app. In night mode, you could not light up the Lifesense Band 2 by rotating your wrist, but you could by touching the key on the screen. Goal Achievement Reminding You can set the goal achievement reminding on the app. There is a goal celebration to encourage you to reach your goal.
Troubleshooting Specifications Specifications Troubleshooting Problem Abnormal measuring results: Huge difference between two recent measurement. Root Cause Incorrect portable fashion Use the correct portable make the device has irregular fashion, avoid that the shaking. Lifesense Band 2 has irregular shaking. Less than 10 steps Slide or wearing the slippers to walk. No display on OLED when the device powers on. The power is not enough. Bluetooth is OFF. Data transmission failed.
Maintenance Maintenance When carrying out usual maintenance, please ensure practice of the following Do’s and Don’ts: DO use a dry soft cloth to wipe the dust. DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device. DON’T wash the device with water or immerse it in water. DON’T use propellant, abrasive or other chemicals to wipe the dirt in avoidance of discolor or malfunction. DON’T disassemble this device.
FCC STATEMENT FCC Statement FCC ID: OU9LS417-F01 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. However, there is no guarantee that interference will not occur in a particular installation.