version:1.0 User Manual Body Fat Analyzer FCC ID:OU9LS208-B8 ZHONGSHAN LIFESENSE ELECTRONICS CO., LTD 23,Jin'an Road, Minzhong, Zhongshan, 528441, Guangdong, China TEL:86-760-88282982 www.transtek.cn LS208-B8 Thank you very much for selecting the Transtek Body Fat Analyzer LS208-B8. Please do read the user manual carefully and thoroughly so as to ensure the safe usage of this product, and keep the manual well for further reference in case you have problems.
Table of Contents Table of Contents Safety Information Safety and Usage Information .................................................................................................. 2 Your Scale and Its Environment ............................................................................................... 3 Efficient Use of Your Scale ........................................................................................................ 3 Overview Device Components ...................................
Safety Information Safety Information Safety and Usage Information INDICATIONS FOR USE The warning signs and symbols are essential to ensure your correct and safe use of this product and protect you and others from injury.
Overview Overview Device Components LED Display LED Display Up Key Down Key Set Key Body Fat Analysis Result Male Total Body Water Analysis Result Male Athlete Muscle Mass Analysis Result Female Bone Mass Analysis Result Female Athlete Calorie Analysis Result Kilogram Body Mass Index Stone Age Pound Foot Percentage List Centimeter User ID (Rangr form P1 to P8) 1. Body Fat Analyzer LS208-B8 2. Four AAA-size Batteries (1.5V per each) 3.
Initial Start-Up Initial Start-Up General Instructions Install APP and Pair-Up Transtek Body Fat Analyzer LS208-B8 applies BIA (Bio-impedance Analysis) technology. A small amount of weak current flows through the human body so as to detect the bio-impedance and estimate calorie, BMI, body fat, body water, muscle mass and bone mass. The electrical current is small and may not be felt. This BIA technology is cheap, safe, non-invasive, toxic-free and harmless.
Initial Start-Up Set Up Your Profile The body fat analyzer LS208-B8 supports multiple users (Up to 8). You may follow below instructions to assign User ID and set up your own profile, including Gender, Stature, and Age. 1.Assigning User ID With batteries correctly installed, press “SET” key to enter setting mode when the scale is off. Or when the LED displays 0.0, press and hold “SET” keyto enter setting mode. Initial Start-Up 4.Setting Age After confirming Stature, the system will divert to Age setting.
Initial Start-Up Initialising Your Scale 1. Press the platform centre and remove your foot. 2. “0.0” will be displayed. Start Measuring First Measurement Please process the user setting before your first measurement. (Refer to Set Up Your Profile for more details) STEP 1: Step on the platform barefooted when the LED display “0.0”. 3. The scale will switch off and is now ready for use. This initialisation process must be repeated if the scale is moved. At all other times step straight on the scale.
Start Measuring Manage Your Health Daily Measurement With original SENSE ON patent technology, LS208-B8 will switch on as you step on the platform barefooted. Stand still and keep full contact with the scale until the LED stops displaying moving “o”. When your scale is successfully paired with your smartphone and the Bluetooth is ON, LS208-B8 will process data transmission instead. (Please refer to Data Transmission for more details.
Troubleshooting Troubleshooting Error Prompt Error Description Overload. The device will power off. Low Battery. The device will power off. Failure of pairing up your scale with your smartphone. There has data doesn’t upload. (The notebook icon will be displayed.) Solution Stop using this scale for measurement. Replace all four batteries in the same time. Please purchase the authorized batteries for replacement. Please check below items: -Bluetooth is ON. -App Collector is ON.
Troubleshooting Specifications Specifications Product Name When Data Transmitting ... Problem Root Cause Bluetooth is OFF. Solution Turn ON the Bluetooth via Setting. Dimension Scale: 320x320x26mm (Approximately) Net Weight Approximately1.98kg Display Measurement Unit Data transmission failed. The App is OFF. Press the icon to turn ON your app. Measurement Range Division Out of range of Bluetooth transmission. Place your smartphone closer to the scale. None of the user ID is assigned.
Maintenance Maintenance When carrying out usual maintenance, please ensure practice of the following Do’s and Don’ts: DO use a dry soft cloth to wipe the dust. DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device. DON’T wash the device with water or immerse it in water. DON’T use propellant, abrasive or other chemicals to wipe the dirt in avoidance of discolor or malfunction. DON’T disassemble this device.
Appendix Appendix Health Tips - About Body Fat Health Tips - About Body Water Body water is the single most important component of body weight. It represents over half of your total weight and almost two thirds of your lean body mass (predominantly muscle). Water performs a number of important roles in the body: All the cells in the body, whether in the skin, glands, muscles, brain or anywhere else, can only function properly if they have enough water.
Appendix Appendix Health Tips - About Muscle Mass According to the American College of Sports Medicine (ACSM), lean muscle mass may decrease by nearly 50 percent between the age of 20 and 90. If you do nothing with it you’re losing muscle and increasing fat. It is also important to know your muscle mass % during weight reduction. At rest, the body burns approximately 110 additional calories for each kilo of muscle gained.
Appendix Appendix Health Tips - About Calorie The device uses your age, height, gender and an activity level setting to calculate the estimated number of calories you can consume a day to maintain your present weight. This estimation may gradually help you with a weight loss, gain or maintenance plan.
Appendix Appendix Table 4 Guidance and MANUFACTURER’s declaration – electromagnetic IMMUNITY – for ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING Guidance and manufacturer’s declaration – electromagnetic immunity The device is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment.