version:1.0 User Manual Body Fat Analyzer Contains FCC ID: OU9LS208-B07 GUANGDONG TRANSTEK MEDICAL ELECTRONICS CO., LTD Zone A, No.105, Dongli Road, Torch Development District, Zhongshan, Guangdong, 528437, China TEL:86-760-88282982 www.transtek.cn LS208-B7 Thank you very much for selecting the Transtek Body Fat Analyzer LS208-B7.
Table of Contents Table of Contents Safety Information Safety and Usage Information ............................................................................................... 2 Tips ........................................................................................................................................... 3 Overview Device Components ................................................................................................................. 4 List ..................................
Safety Information Safety Information Safety and Usage Information The warning signs and symbols are essential to ensure your correct and safe use of this product and protect you and others from injury.
Overview Overview Device Components LED Display LED Display Up Key Set Key Down Key Body Fat Analysis Result Kilogram Total Body Water Analysis Result Percentage Muscle Mass Analysis Result Male Bone Mass Analysis Result Male Athlete Calorie Analysis Result Female Body Mass Index Female Athlete Age User ID (P1-P8) Foot Successful Bluetooth Connection List Stone Data transmitting / pending to transmit to wireless wellness system 1. Body Fat Analyzer LS208-B7 2.
Initial Start-Up Initial Start-Up General Instructions Install APP and Pair-Up Transtek Body Fat Analyzer LS208-B7 applies BIA (Bio-impedance Analysis) technology. A small amount of weak current flows through the human body so as to detect the bio-impedance and estimate calorie, BMI, body fat, body water, muscle mass and bone mass. The electrical current is small and may not be felt. This BIA technology is cheap, safe, non-invasive, toxic-free and harmless.
Initial Start-Up Initial Start-Up Set Up Your Profile The body fat analyzer LS208-B7 supports multiple users (Up to 8). You may follow below instructions to assign User ID and set up your own profile, including Gender, Stature, and Age. 1.Assigning User ID With batteries correctly installed, press “SET” key to enter setting. The system will request User ID selection first. As pictured below, “P1” blinks. The operator may press the function key or to select User ID among P1 to P8. 4.
Initial Start-Up Start Measuring First Measurement Initialising Your Scale 1. Press the platform centre and remove your foot. 2. “0.0” will be displayed. Please process the user setting before your first measurement. (Refer to Set Up Your Profile for more details) STEP 1: Step on the platform barefooted. 3. The scale will switch off and is now ready for use. This initialisation process must be repeated if the scale is moved. At all other times step straight on the scale.
Start Measuring Daily Measurement With original SENSE ON patent technology, LS208-B7 will switch on as you step on the platform barefooted. Stand still and keep full contact with the electrodes until the LED stops displaying moving “o”. Manage Your Health Data Transmission With LS208-B7 successfully pair-up with your smartphone, the measurement data will be transmitted to your mobile via Bluetooth.
Troubleshooting Troubleshooting Error Prompt Error Description Overload. The device will power off. Low Battery. The device will power off. Failure of pairing up your scale with your smartphone. Solution Stop using this scale for measurement. Problem Root Cause Solution Abnormal measuring results: - Too high; OR - Too low; OR - Huge difference between two recent measurement. Either your hands or your feet are too dry.
Troubleshooting Specifications Specifications When Data Transmitting ... Problem Root Cause Bluetooth is OFF. The App is OFF. Data transmission failed. Solution Turn ON the Bluetooth via Settings. Press the icon to turn ON your app. Out of range of Bluetooth transmission. Place your smartphone closer to the scale. None of the user ID is assigned. Please assign a User ID following the instruction in Set Up Your Profile.
Maintenance Maintenance When carrying out usual maintenance, please ensure practice of the following Do’s and Don’ts: DO use a dry soft cloth to wipe the dust. DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device. DON’T wash the device with water or immerse it in water. DON’T use propellant, abrasive or other chemicals to wipe the dirt in avoidance of discolor or malfunction. DON’T disassemble this device.
Appendix Appendix Health Tips - About Body Fat Health Tips - About Body Water Human body is made up of, amongst other things, a percentage of fat. Body fat is vital for a healthy, functioning body, protects vital organs, helps regulate body temperature, stores vitamins and helps the body sustain itself when food is scarce. However, too much body fat or indeed too little body fat will damage to your health.
Appendix Appendix Health Tips - About Muscle Mass According to the American College of Sports Medicine (ACSM), lean muscle mass may decrease by nearly 50 percent between the age of 20 and 90. If you do nothing with it you’re losing muscle and increasing fat. It is also important to know your muscle mass % during weight reduction. At rest, the body burns approximately 110 additional calories for each kilo of muscle gained.
Appendix Appendix Health Tips - About Calorie The device uses your age, height, gender and an activity level setting to calculate the estimated number of calories you can consume a day to maintain your present weight. This estimation may gradually help you with a weight loss, gain or maintenance plan.
Appendix Appendix Table 6 – Recommended separation distances between portable and mobile RF communications equipment and the ME EQUIPMENT or ME SYSTEM – for ME EQUIPMENT and ME SYSTEMS that are not LIFE - SUPPORTING Table 4 – Guidance and MANUFACTURER ’ S declaration – electromagnetic IMMUNITY – for ME EQUIPMENT and ME SYSTEMS that are not LIFE - SUPPORTING Guidance and manufacturer’s declaration – electromagnetic immunity The device is intended for use in the electromagnetic environment specified below.
