version:1.0 User Manual Glass Body Fat Analyzer LS206-E Thank you very much for purchasing TRANSTEK Glass Body Fat Analyzer LS206-E ZHONGSHAN TRANSTEK ELECTRONICS CO.,LTD Jin'an Road, Minzhong, Zhongshan, 528441, Guangdong, China TEL:86-760-88282982 www.transtek.cn To assure the correct use of the monitor, please read this manual carefully and thoroughly. Please well keep this manualfor future reference.
Any information provided by this device is in no way meant to treat, cure or prevent any disease or illness from happening. This device should not be used by anyone who is acutely or chronically ill, suffering from a disease or taking medications that affect your water levels. The accuracy of readings for these patients has not been verified. Specific medical advice should be obtained from a physician. Portable and mobile RF communications equipment can affect LS206-E.
BASAL METABOLISM- WHY SHOULD I KNOW IT? Basal metabolism refers to the life activities do not exercise at a quiet state of the body maintains its own life activities required energy consumption.We recommend that the general energy consumption by basal metabolism + diet process + the required energy of growth or development children or pregnant women+ physical activity. Among them, the basal metabolism accounts for a large part (about 60% -75%).
USING YOUR ANALYZER SCALE TROUBLESHOOTING In order to measure body fat, you must first enter your height, age, gender and activity level selection. The analyzer uses these parameter to calculate your measurement results. 1. You must have feet bared to take this measurement. In order to get the most accurate and consistent reading, wipe your feet with a damp cloth, leaving them slightly damp before stepping on the scale.
CAUTION BIA (Bioelectrical Impedance Analysis)method determines your body fat percentage by sending a harmless signal through the body. This device should not be used by anyone with an internal electronic medical device, such as a pacemaker, as a precaution against disruption to that device. If in doubt, contact your physician.
IV. Measuring(user identification automatically) III. Measuring(select user manually) a) Press user symbol on the platform to select user. b) Please wait until the LCD displays “ a) Please step onto the platform direct ly with bare feet to turn on. b) Stand still and the weight data will be locked automatically ”. c) Step onto the platform with bare feet. c) The measuring will start automatically with the “ ” signal moving from left to right.
CARE AND MAINTERANCE WARNING INDICATORS = Low battery warning. Replace the batteries. Always replace all the worn batteries at the same time; do not combine old and new batteries. = Overload Warning. The maximum weighing capacity of the scale has been exceeded. Remove the weight immediately; otherwise, permanent damage to the scale will occur. Professional medical guidance should always be sought before embarking on diet and exercise programmes. PREGNANT WOMEN SHOULD CONSULT THE DOCTOR BEFORE USE.
FIVE YEAR WARRANTY This scale is warranted against defects in materials of workmanship for five years for the original purchaser from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. Do not return to retailer.
a) *General information — Instructions for use shall state the function and intended application of the EQUIPMENT. — Instructions for use shall contain all information necessary to operate the EQUIPMENT in accordance with its specification. This shall include explanation of the function of controls, displays and signals, the sequence of operation, connection and disconnection of detachable parts and ACCESSORIES, replacement of material which is consumed during operation.
d) Environmental conditions for transport and storage The technical description shall contain a specification of the permissible environmental conditions for transport and storage which shall be repeated on the outside of the packaging of the EQUIPMENT [see Sub-clause 6.1 v)] 6.8.4 Not used. 6.8.5 Not used. Compliance with the requirements of Sub-clause 6.8 is checked by inspection of the ACCOMPANYING DOCUMENTS.
Guidance and manufacturer’s declaration – electromagnetic immunity Guidance and manufacturer’s declaration – electromagnetic immunity The LS206-E is intended for use in the electromagnetic environment specified below. The customer or the user of the LS206-E should assure that it is used in such an environment. The LS206-E are intended for use in the electromagnetic environment specified below. The customer or the user of the LS206-E should assure that it is used in such an environment.
Recommended separation distances between portable and mobile RF communications equipment and the LS206-E The LS206-E is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
