version:1.0 User Manual Body Fat Analyzer FCC ID: OU9GBF1144-B ZHONGSHAN LIFESENSE ELECTRONICS CO., LTD 23,Jin'an Road, Minzhong, Zhongshan, 528441, Guangdong, China TEL:86-760-88282982 www.transtek.cn GBF-1144-B Thank you very much for selecting the Transtek Body Fat Analyzer GBF-1144-B. Please do read the user manual carefully and thoroughly so as to ensure the safe usage of this product, and keep the manual well for further reference in case you have problems.
Table of Contents Table of Contents Safety Information Safety and Usage Information ................................................................................................... 2 Your Scale and Its Environment ............................................................................................... 3 Efficient Use of Your Scale ...................................................................................................... 3 Overview Device Components ....................................
Safety Information Safety Information Safety and Usage Information The warning signs and symbols are essential to ensure your correct and safe use of this product and protect you and others from injury.
Overview Overview LCD Display Device Components LCD Display UNIT Button Battery Compartment List Pending to transmit to wireless wellness system Stone Data Transmitting Pound Bioelectrical Impedance Analysis Kilogram 1. Body Fat Analyzer GBF-1144-B 2. Three AAA-size Batteries (1.5V per each) 3.
Initial Start-Up General Instructions Transtek Body Fat Analyzer GBF-1144-B applies BIA (Bio-impedance Analysis) technology. A small amount of weak current flows through the human body so as to detect the bio-impedance and estimate body fat. The electrical current is small and may not be felt. This BIA technology is cheap, safe, non-invasive, toxic-free and harmless. It also possesses the characteristics of simple operation and abundant information. The current mentioned above is less than 0.5mA.
Initial Start-Up Select Measurement Unit With batteries correctly installed, press “UNIT” button in the back of the scale to select measurement unit. The default measurement unit is “kilogram”. You may press “UNIT” button to choose among kilogram, stone and pound. Start Measuring Daily Measurement With original SENSE ON patent technology, GBF-1144-B will automatically switch on as you step on the platform barefooted.
Data Transmission Troubleshooting Error Prompt Data Transmission Error With GBF-1144-B successfully pair-up with your smartphone, the measurement data will be transmitted to your mobile via Bluetooth. The symbol will disappear after successful data transmission, and you may check your personal health data stored in your smartphone. If the data transmission fails, the symbol will remain.
Troubleshooting Troubleshooting When Data Transmitting ... Problem Root Cause Solution Problem Abnormal measuring results: - Too high; OR - Too low; OR - Huge difference between two recent measurement. Your feet are too dry. Batteries not yet installed. Install the batteries. (Please refer to Insert the Batteries) Worn batteries. Replace all three batteries at the same time. Please purchase the authorized batteries for replacement. No display on LCD when the device powers on.
Specifications Maintenance Specifications Product Name When carrying out usual maintenance, please ensure practice of the following Do’s and Don’ts: Dimension Scale: 310x306x27.6mm (Approximately) Net Weight Approximately 1.572kg ( Excluding the dry cells) DO use a dry soft cloth to wipe the dust. Digital LCD DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device.
Appendix Appendix FCC Regulations FCC User Guide Information Radio Frequency Interface Requirements - FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix Appendix EMC Guidance Table 2 Guidance and MANUFACTURER’s declaration – electromagnetic IMMUNITY – for all ME EQUIPMENT and ME SYSTEMS Table 1 Guidance and MANUFACTURER’s declaration – ELECTROMAGNETIC EMISSIONS- for all ME EQUIPMENT and ME SYSTEMS Guidance and manufacturer’s declaration – electromagnetic emissions The device is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment.
Appendix Appendix Table 4 Guidance and MANUFACTURER’s declaration – electromagnetic IMMUNITY – for ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING Guidance and manufacturer’s declaration – electromagnetic immunity The device is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment.