Erse uct features 1. Low=voltage Protection: When the noncaloric lights at fhe bottom of fhe drone start flashing, # means that this drones battery popover is low, At his time, the drop will initiate the height-liniting function and will descend to a safe altitude. 2. Over-current Protection: If the drone encounters a.direct impact from a foreign object Eris-obstrusted, or if the blades are not rotating, the-drone will guilt over-current protection made, 3.
4. Fast/Slow Speed Function: Slow speed by default whiting first powerless-on. Possible to switch the function mods of fastidious sped by pressing i dn the Nightstick fora short-time. [tis switched into Tas! speed made wain two “beep” sounds:come from the remote control res sing ion the night joystick for a shirt tire Under fast speed mode dnd then one “beep” sound would come from the remote control, their iris then switched back to slow speed rode, 5.
2 After connecting the drone tithe power supply, push therewith to “ON” position, and adjust the specified direction of the dibble's head under the headless made as the new forward direction. 3. Push the left joystick (throttle) on the remote Control Up 16 thee Farthest Po Son and then pull down to the farthest position. When the premiere control issues a long beep sound, it means the frequency and defining forward direction Functions arg completed, B. Calibration for the definition of the ont, 1.