User Manual Product Name: Wireless Door Bell System -INDOOR Model: DBIM10A,DBIM20A, DBIM30A,DBIM40A,DBIM50A Brand: Manufacture :Guangdong Samzuk Technology Development Co,Ltd
Operation Manual Wireless Door Bell System -INDOOR Features Model: DBIM10A ● 9 ring-tones available for your selection. ● Portable indoor unit that allows communication with the outdoor unit from any location. ● Built-in rechargeable battery that allows long-time operation without power supply. ● No need to press the button on the outdoor unit during the communication of the indoor and outdoor units. ● One outdoor unit can be used with several indoor units.
1. Getting familiar with the unit MIC.
1. Preparation before installation 1.1 Checking Code matching is conducted by the factory before delivery. You can check them before installation 1) Turn on the rotation button of the indoor unit, and you can hear a "DI" sound if the battery is not empty. 2) The distance between the outdoor unit and indoor unit shall be greater than 2 meter. 3) Press door bell button of the outdoor unit. If a ring-tone can be heard from the indoor unit, and the red-blue-green indication lights flash rapidly.
4) When the indoor unit battery level is low, the Low Battery (IN) blue light of the indoor unit will keep flashing as a reminder to plug in the power source for charging. Notes 1)Be sure to turn on the rotation button of indoor unit, otherwise the battery capacity and charging status of all units cannot be monitored through the indicator light.
2. Installation Normally, the outdoor unit can be fixed at the outdoor doorbell location with screws. The indoor units can be placed on the desks in different rooms or be shifted at the customer's convenience. Installation Position Drawing of the Outdoor Unit 155.
3. Instruction 3.1 Ring-tone selection 9 customized ring-tone are available in the system. Press the ring-tone selection button at the back of the indoor unit to select. 3.2 TALK button function 1) When someone is pressing the doorbell, the indoor unit will ring, and the red, blue and green lights will also flash (for 20 seconds) to alert the user. the person inside can keep press the TALK button to communicate with the person outside.
3.4 Code matching The units are normally matched before delivery. If necessary, please perform the code matching according to the following steps: 1) Turn off the indoor unit; 2) Press and hold the TALK button of the indoor unit, and turn on the rotation button at the same time. When the Low Battery (In) blue light at the center of the indoor unit flashes rapidly, press the ring bell of the outdoor unit.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.