WIFI REMOTE VIDEO DOORBELL MODEL: RL-IP02C USER MANUAL
Product Description The product is a video intercom product that integrates wireless remote communication and security alarm functions together. It connects home routers through network wire or WIFI and has the remote video intercom function through mobile phone APP terminal. When there is a visitor, mobile phone will have an active prompt message, users can remotely video intercom with the visitor.
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Operation Instruction Click the “+” button on the top right corner, scan the QR code and then you can add the device shared by your friends. A. Product Introduction. 1). Adopt high-performance ARM SOC chips, 720P CMOS sensor, 85° viewing angle and H264 encode, support infrared night vision function and the night vision range reaches 1.5 meters. 2). Support WIFI or wire connection with internet. Adopt 802.11b/g/n protocol, support one-click wifi password setting. 3).
E. Video Intercom F. Records 1) Real time monitoring 1) Check the records Click the current device to enter the video intercom interface, it will start the talking and video functions between users and outdoor unit. (Please see the pictures below.) ·Unlock: Click the “Unlock” button to release the electric lock. ·Video recording: Click the “Video” button to start video recording, the recorded videos will be saved on the smart terminals, click the “Video” button again to stop recording.
Technical Parameters Camera: one megapixel CMOS Power supply: DC 12V Working current: <400mA Max power consumption: <5W Outline size: 163*85*62mm Sub unit code learning 2) Vibrate Setting Slide the vibrate button to turn on or turn off the vibration function when there is a call or alarm. 3) About Check the current version, if the current version is not the latest version, you can download the latest APP on our official website. 4) Exit Click the “Exit” button, the APP will be offline.