Bluetooth Remote Control User Guide Version 0.
The "Bluetooth Remote Control"needs to be paired with your phone before use. Please follow the procedure shown below to set up a connection to the Bluetooth Remote Control: 1. Ensure that Bluetooth is turned on; 2. Tap the button at the center of the "Bluetooth Remote Control" 3. Open the "Bluetooth Remote Control"app on your phone.The first time you use the App, it will prompt you to perform a search and to connect to the device.
Disconnect alert - your phone will ring when it is disconnected from the Bluetooth Remote Control; Message notification - the Bluetooth Remote Control will flash when there is an incoming call or a message. Settings: this includes user guide, firmware upgrade, help and about. During Bluetooth connection please note Make sure the two devices are placed within the Bluetooth maximum range (5 meters); Make sure there are no obstacles between the two devices, e.g. human bodies, walls, corners or railings.
Do not place the device in any overly hot or overly cold environment.
The radio frequency emitted by the device may interfere with certain types of hearing-aids and cochlear implants. Please contact the manufacturer of such a product before using our device to confirm whether the radio frequency emitted by our device will interfere with their product. Note Do not disassemble, modify, or repair the device. Any change or modification made to the device will void the manufacturer's warranty If the device needs repairing, send it to OPPO customer service.
Water and Dust If water or dust enters device, it may cause damage to the device. Strictly follow the instructions in order to prevent damage to the device and to keep the device water-proof and dust-proof. Do not submerge the device under water over 1 meter deep for more than 30 minutes. Do not expose the device to high-pressure water such as waves or waterfalls. If the device or your hand is damp, dry your device or your hand before using the device.
Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited. The suitable temperature for the product and accessories is -10℃-50℃. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Hereby, GUANGDONG OPPO MOBILE TELECOMMUNICATIONS CORP.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Warranty description Dear user, thank you for using our product. In case of any damage that is not due to human error, warranty service is available for a period of one year beginning from the original purchase date:The warranty covers: refund within 7 days, replacement within 1month, and repair within 6 months. To protect your legal interests, please read the following notes carefully: (1) The warranty card must be stamped by the distributor to become valid. (2) Consumers should retain their warranty card.
(6) The serial number shown on the warranty card does not match that on the product, or the warranty card has been altered. (7) SN barcode or seal tape of the product is missing, damaged, or blurred beyond recognition. A product that is repairable but not covered by our free repair service may be repaired for a service fee.
OPPO Warranty Card (For Consumers) Consumer information (to be filled out by the consumer): Name: ________________ Postcode: ______________ Address: ________________________________ Tel (with area code): ________________________________ Product Information: ________________________________ (Product model/Color/SNcode/Other Information): ____________________ Retailer Information: ________________________________ Retailer Name (with stamp): ________________________________ Retailer Tel (with area code): _
OPPO Warranty Card (For Consumers) Consumer information (to be filled out by the consumer): Name: ________________ Postcode: ______________ Address: ________________________________ Tel (with area code): ________________________________ Product Information: ________________________________ (Product model/Color/SNcode/Other Information): ____________________ Retailer Information: ________________________________ Retailer Name (with stamp): ________________________________ Retailer Tel (with area code): _
OPPO Warranty Card (For Consumers) Consumer information (to be filled out by the consumer): Name: ________________ Postcode: ______________ Address: ________________________________ Tel (with area code): ________________________________ Product Information: ________________________________ (Product model/Color/SNcode/Other Information): ____________________ Retailer Information: ________________________________ Retailer Name (with stamp): ________________________________ Retailer Tel (with area code): _
V0.0.