This guide will show you how to use the phone and its important functions. If you need more detailed instruction, please switch on the phone and select “Tools-User manual”. You may also visit OPPO official website to get more information about the phone.
Functions of components 1. Front camera; 2. Light sensor&infrared sensor; 3. Volume button; 4. Power button; 5. Menu key 6. Home Key; 7. Return key. Light sensor: This component will automatically detect the light intensity and adjust the screen brightness according to the light intensity for your convenience. Infrared sensor: This component will automatically detect the distance between the body and the phone during calls.
SAR Values The highest SAR values under the FCC guidelines for this device model are: 0.730 W/kg(Head ) and 1.2 W/kg(Body). The highest SAR values under the CE guidelines for this device model are: W/kg(Head ) and W/kg(Body). Standby and call duration Type Duration Standby duration Call duration GSM 180 hours 420 minutes WCDMA 180 hours 360 minutes Charger Information Brand / Model AK901 AK901JH Input 100-240V~ 50-60Hz 0.2 A Output 5V 1A 100-240V~ 50-60Hz 0.
Performance parameters Product name Product model Main screen parameters Dimension Weight Mobile phone OPPO 1206 4.5 inch(480x854) 131.9 x 65.5 x 8.0 (mm) 4.76ounces (135 grams) Battery Camera 2000 mAh 8-Megapixel Rear, 2-Megapixel Front Operating temperature -10°C – 45°C Standard accessories You are provided with the following standard accessories: 1 Phone, 1 Charger, 1 Earphone, 1 Battery, 1 USB data cable, 1 Safety Guide, 1 Quick Guide.
This user manual provides the product safety information. Before using the phone, please read the Important Information Guide (IIG) carefully. OPPO has preinstalled the Quick Guide application and some operational suggestions in your device, please read both carefully.
Declaration OPPO is a trademark or registered trademark of a Guangdong OPPO MobileTelecommunications Corp., Ltd. © 2010 OPPO. All rights reserved. This device may contain commodities, technology or software subject to export laws and regulations from Thailand and other countries. Diversion contrary to law is prohibited. OPPO has a policy of ongoing development. Thus, OPPO reserves the right to make changes or improvements to any of the products described in this document without prior notice.
Safety Please read the following. instructions before useing the mobile phone Without following these instructions it might be dangerous or illegal. Further information about safety are provided by this user manual. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must not accept any interference received, including interference that may cause undesired operation.
Interference All wireless devices might be susceptible to interference, which could affect performance. Switch off at blasting area Please obey all related regulations. Please do not use this device at blasting area. Appropriate use of the phone Use the phone only at appropriate places. After switching it on, please do not touch the antenna area if possible. Qualified service Only qualified personnel or OPPO technician may install or repair this product.
Battery precautions in use Please do not weld battery terminals. Otherwise, it may cause battery leakage, overheat, explosion and fire. Please do not press or pierce the battery with hard objects (for example needle or other sharp objects), to avoid damage, battery leak, overheating or fire. Battery liquid may be harmful if contacted with skin or clothes, your skin might be hurt. Please immediately wash it with water, or go to hospital at once to seek medical help if necessary.
Please keep the battery away from moist or wet areas from moisture. Otherwise, it may cause battery overheat, fuming and corrosion. Do not place the battery directly in sunlight, or other high temperature areas. Otherwise, battery leakage and overheaingt may make battery performance descend and service life affected. Keep the battery in a well-ventilated area. Do not use the battery or connect it a high-voltage power supply,tootherwise it may cause a short circuit or burst.
If the charger is exposed to water or other liquid, please immediately unplug the power supply from socket in order to avoid overheat, fire, electric shock and charger errors. Please do not disassemble or modify charger, as it may cause personal injury, electric shock, fire and charger damages. Please do not use the charger in moist places, otherwise it may cause short circuit, fire or damage to the charger. Please do not touch the charger, cable and power socket with wet hands, as it may cause electric shock.
Charger precautions in use Please only use OPPO charger. Please ensure to use only the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the phone and the guarantee article. Please use the specified voltages for the given charger. As other voltages may cause leakage or fire. It may also damage your phone and battery. Please do not use an improper plug and outlet, make sure the plug and outlet are appropriate, therwise it may cause fire.
Driving safely Safety should always come first when you are driving a car. If you decide to use the phone while driving, make sure to follow related regulations in the area or country. Please do not store or carry your mobile phone and accessories with liquid or inflammable gas. Please always remember the safety airbag in your car will open rapidly in case of an accident so make sure you do not place your phone and accessories on top of them.
Operating environment 14 This special regulation shall be observed wherever you are. And you shall switch off the device when phone use is prohibited or when it may cause interference or danger Mobile phones may interfere with normal operations of electronic equipment and medical devices. Please observe related regulations while you are using mobile phones in these areas. Please check your power on/off settings to ensure that your mobile phone would not power on automatically.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must not accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Operations in the 5.15-5.
The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.
CE certification information (SAR) This device was tested for typical body-worn operations with the back of the handset kept 1.5cm away. To maintain compliance with RF exposure requirements, use accessories that maintain a 1.5cm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly.
Avoid the phone to expose in moisture area, water or other liquid, as it may cause overheat, electric leakage and other problems may occur. Do not force the display or use the display to beat other things. Otherwise, it may cause display damage and leakage of the liquid inside the LCD. The liquid of the LCD may cause blindness if it comes in contact with your eyes. If that happens, flush your eyes with water immediately (do not rub your eyes) and go to hospital for help.
All other equipment shall a) Protect the user from unintentional acoustic outputs exceeding those mentioned above; b) Have a standard acoustic output level not exceeding those mentioned above, and automatically return to an output level not exceeding those mentioned above when the power is switched off; c) Provide a means to actively inform the user of the increased sound pressure when the equipment is operated with an acoustic output exceeding those mentioned above.
Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you observe warranty terms and prolong the life of the device. If the screen comes in contact with liquid, metal dust or other objects, please clean immediately. Please do not touch the connection port of the phone, because static electricity may harm the components in the device. Do not knock, shake or drop the phone to avoid troubles or fire.
Do not place the phone in areas with high temperature, high humidity and lots of dust as it may damage the device. Please keep the phone out of the reach of children, in order to protect them from causing injuries. Do not place the phone on uneven or unstable table to avoid dropping the device. Your phone, battery and charger are not waterproof, please do not use it in bathroom or other humid area and avoid contact with rain.
When the phone is transmitting or saving info, please do not uninstall the SIM card, otherwise youmay lose some important information or harm your device. Use only the supplied or approved replacement antenna. Modified accessories may damage the phone or violate administer regulations of radio devices. This device only supports a standard Micro SIM card, using non-standard SIM card may harm the device. 5G wifi indoor used only.
OPPO Mobile Warranty Information I:Service Terms Thank you using OPPO mobile phone. We will provide our product with comprehensive for warranty services in accordance with applicable national laws and regulations. In case of any conflict between the following policies and the National Policies , or Commissions; the national policies shall prevail. 1.
4. A valid warranty card and invoice are essential for protecting your warranty rights. (Valid warranty card and invoice: the information filled in shall be complete, true and correct without alteration). If you lose the valid invoice and warranty card and unable to provide us with a photocopy of it, we will provide your mobile phone with a 12-month warranty service beginning on the 90th day after the manufacturing date of your mobile phone. 5.
II. Warranty Instructions and Conditions 1. Your warranty is only valid under normal use of your device. All man-made damages and any of the following conditions are out of free warranty, but a repair can be still implemented at your own cost. A. The warranty period has expired; B. Damage caused by human factors, including damages caused by usage under improper operating environment and the failure to the user manual;observe and understand C.
2. Others A. External damage (including wear, tear, and scratches) are not entitled to the return service; B. Faults caused by the Internet and wireless information service providers (operators) are not covered by the warranty; C. Our warranty does not cover services verbally promised by the dealer that the warranty violates principles set forth on the warranty card. For products that meet the replacement requirements, you can go to our nearest approved warranty service centre for replacement.
III: Considerations for Sending the Device for Repair and Returning it 1. When completing the OPPO Mobile Phone Repair Form, the customer must fill in valid information in clear handwriting as required (name, address, phone number and fault symptoms); 2.
Performance Failure Table Name Performance failure Failure of functions listed in the user manual No display / typos / drain plan Device Can not boot / can not login or communicate No vibration Dialling error Accidental shutdown Poor SIM card contact Button control failure Charger No sound in one direction or abnormal volume Casing breakage due to structural or material factors; does not work or unable to work normally; unable to charge normally using the designated charger Battery The phone is sti
Contact Us If you have any enquiries, feedback or suggestions on our products and services, please contact us through the following channels: Hotline: 1800-767-OPPO(6776） Email: service@oppo.com.sg Website: www.oppomobile.com.
OPPO Mobile Phone Repair Records OPPO Mobile Phone Repair Records Maintenance Record #1 Service Center Name: Maintenance Record #2 Service Center Name: Maintenance Date: Maintenance Date: Fault Description: Fault Description: Maintenance Description: Maintenance Description: Original IMEI / ESN: Original IMEI / ESN: New IMEI / ESN: New IMEI / ESN: Maintenance personnel signature: Maintenance personnel signature: 31
WARRANTY CARD User Information: User Name: Phone No.
V0.2.
Important Information Guide
