WS-TB-1 USER MANUAL Guangdong NanGuang Photo&Video Systems Co.
WS-TB-1 Transmitter Box Product Diagram 1. Indicator 2. Safety clip 4.Function button 5. Power switch 3. Hanging ring 6. Reset button 7. USB Type-C port 8. 1/4-20 mount receiver The WS-TB-1 transmitter box is suitable for the fixtures with 2.4G or Bluetooth. Usage 1. Toggle the power switch to turn on the transmitter box. The transmitter box indicator will first display the current battery level, and then enter the working mode.
. Charging status display: Connect the USB Type-C cable to the USB Type-C port of the transmitter box, and then connect the power supply to charge the transmitter box. (Note: Do not charge in a high temperature environment.) ① When charging in the power-on state, the indicator will be dimmed, and you can check the current battery level by short pressing the function button.
Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Version: V1 2021-06-06 +86-754-85751187 service@nanlite.com +86-754-85300887 Zhanglin,324,Dongli Chenghai Shantou Guangdong China www.nanlink.