WS-DMX-T1 USER MANUAL Guangdong NanGuang Photo&Video Systems Co.
WS-DMX-T1 Wireless DMX Transmitter Product Details 5. Power button 6. Function button 7. 5-Pin XLR male connector 1. Antenna 2. Side indicator 3. Front indicators 4. Reset button 8. USB Type-C port Detailed Description 1. Antenna: Enhance signal transmission. 2. Side indicator: Indicates low battery and displays charging status. 3. Front indicators: For indicating the battery level and transmitter group (corresponding to the eight groups of "ABCDEFGH" from left to right). 4.
6. Function button: For switching the groups. 7. 5-Pin XLR male connector: For connecting the DMX adapter or console. 8. USB Type-C port: For charging the transmitter or upgrade the firmware. Usage 1. Long press the power button to turn on the wireless DMX transmitter after inserting it into the console, press the function button to select one group. Then select the corresponding group on the fixture to control it wirelessly via DMX console after activating its wireless DMX function. 2.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Version: V2 2022-05-24 +86-754-85751187 service@nanlite.com +86-754-85300887 Zhanglin,324,Dongli Chenghai Shantou Guangdong China www.nanlink.