FS-300B USER MANUAL Guangdong NanGuang Photo&Video Systems Co.
FS-300B LED Bi-color Spot Light Product Diagram FS-300B Technical Data Rated Power: 350W Input voltage/current: AC100-240V 50/60Hz Color Temperature: 2700K-6500K CRI: Average 96 TLCI: Average 97 The FS-300B comes with Bowens mount and is compatible with Bowens mount accessories.
Product Details 1. Lock catch 5. LCD screen 6. Lamp body handle 2. Umbrella hole 7. USB port 8. Right knob 9. MODE button 3. Reflector 10. Power switch 11. Fuse base 12. Left knob 13. Power socket 14. Yoke 15. Bracket fixing knob 4.
Detailed Description 1. Lock catch: For installing and disassembling reflector and other accessories. 2. Umbrella hole: For installing/removing an umbrella. 3. Reflector: For gathering light to improve the central illumination. 4. Angle fixing knob: Allows for adjusting and fixing the direction of light in tilt. 5. LCD screen: For displaying the data. 6. Lamp body handle: Be convenient for users to lift the lamps and adjust the direction of the light. 7. USB port: For updating the firmware. 8.
Usage 1. Installation of the Reflector When installing the reflector, ensure its mounting points align with the slots on the light fixture. When the mounting points and slots are aligned, push the reflector in place and rotate it in the direction shown on the light until it clicks into place. When removing the reflector, push and hold the lock catch and rotate until the reflector is free to be removed from the fixture. Press lock catch to release the reflector. Put the umbrella into the umbrella hole.
3. 2.4G and Bluetooth Remote Control The FS-300B is able to be remotely controlled by 2.4G remote controller, or by NANLINK APP via the WS-TB-1 transmitter box or via Bluetooth directly. Note: 1. 2.4G remote controller and transmitter box are sold separately. 2.The fixture supports the 2.4G wireless protocol V1.0 and V2.0. Please set fixture to V2.0 while using WS-RC-C1 or WS-RC-C2 remote controller. Please set fixture to V1.0 while using other remote controllers.
Operating Instructions 1. First ensure that the power switch of the fixture is off. Now turn on the light, the LCD screen will display all the relevant information for the fixture. CCT CH: 512 000% 5600K 2. CCT Mode Setting Press MODE button to CCT mode, rotate "Left knob" to set the DIM (DIM range: 000%…100%), rotate "Right knob" to set the color temperature (CCT range: 2700K…6500K). CCT CH: 512 000% 5600K MODE Press MODE button to CCT mode. 0% .. .
2700K .. . CCT CH: 512 CCT 000% 2700K 6500K CH: 512 100% 6500K rotate "Right knob" to set the color temperature. Note: 1. In effect mode, DIM range is the same as the CCT MODE. 2. In effect mode, the color temperature is not synchronized with the color temperature in CCT mode, and the CCT adjustment range is the same as that in the CCT mode. 3. When the fixture function is unlocked, in any modes, press "Left knob" to turn off the light, the brightness percentage on the screen is 000% in this case.
EFFECT CH: 512 FX: CCT LOOP DIM: 100% CCT LOOP .. . EFFECT CH: 512 FX: CCT LOOP DIM: 100% WELDING Rotate "Left knob" to select the desired effect. ①CCT LOOP CCT LOOP setting: rotate "Right knob" to select from DIM, CCT and SPD (Range: 02S…30S), then rotate "Left knob" to adjust the value of DIM, CCT and SPD. EFFECT CH: 512 FX: CCT LOOP DIM: 100% EFFECT CH: 512 FX: CCT LOOP DIM: 100% Rotate "Right knob" to select from DIM, CCT and SPD.
②INP LOOP INT LOOP setting: rotate "Right knob" to select from DIM, CCT and SPD (Range: 02S…30S), then rotate "Left knob" to adjust the value of DIM, CCT and SPD. EFFECT CH: 512 FX: INP LOOP DIM: 000% - 100% EFFECT CH: 512 FX: INP LOOP DIM: 000% - 100% Rotate "Right knob" to select from DIM, CCT and SPD. EFFECT CH: 512 FX: INP LOOP DIM: 000% - 100% EFFECT CH: 512 FX: INP LOOP DIM: 099% - 100% Rotate "Left knob" to adjust the value of DIM, CCT and SPD.
EFFECT CH: 512 FX: FLASH DIM: 100% EFFECT CH: 512 FX: FLASH DIM: 099% Rotate "Left knob" to adjust the value of DIM, CCT and INTERVALS. ④PULSE PULSE setting: rotate "Right knob" to select from DIM, CCT and PULSES/MIN (Range: 001…240), then rotate "Left knob" to adjust the value of DIM, CCT and PULSES/MIN. EFFECT CH: 512 FX: PULSE DIM: 100% EFFECT CH: 512 FX: PULSE DIM: 100% Rotate "Right knob" to select from DIM, CCT and PULSES/MIN.
⑤STORM STORM setting: rotate "Right knob" to select from DIM, CCT and INTERVALS (range: 1s ... 60s) , then rotate "Left knob" to adjust the value of DIM, CCT and INTERVALS. EFFECT CH: 512 FX: STORM DIM: 100% EFFECT CH: 512 FX: STORM DIM: 100% Rotate "Right knob" to select from DIM, CCT and INTERVALS. EFFECT CH: 512 FX: STORM DIM: 100% EFFECT CH: 512 FX: STORM DIM: 099% Rotate "Left knob" to adjust the value of DIM, CCT and INTERVALS.
EFFECT CH: 512 FX: TV DIM: 000% - 100% EFFECT CH: 512 FX: TV DIM: 099% - 100% Rotate "Left knob" to adjust the value of DIM, CCT and SPD. ⑦PAPARAZZI PAPARAZZI setting: rotate "Right knob" to select from DIM, CCT and SPD (Range: 001…100), then rotate "Left knob" to adjust the value of DIM, CCT and SPD. EFFECT CH: 512 FX: PAPARAZZI DIM: 100% EFFECT CH: 512 FX: PAPARAZZI DIM: 100% Rotate "Right knob" to select from DIM, CCT and SPD.
⑧CANDLE/FIRE CANDLE/FIRE setting: rotate "Right knob" to select from DIM, CCT and (Range: 001…100), then rotate "Left knob" to adjust the value of DIM, CCT and SPD. EFFECT CH: 512 FX: CANDLE/FIRE DIM: 000% - 100% EFFECT CH: 512 FX: CANDLE/FIRE DIM: 000% - 100% Rotate "Right knob" to select from DIM, CCT and SPD. EFFECT CH: 512 FX: CANDLE/FIRE DIM: 000% - 100% EFFECT CH: 512 FX: CANDLE/FIRE DIM: 099% - 100% Rotate "Left knob" to adjust the value of DIM, CCT and SPD.
EFFECT CH: 512 FX: BAD BULB DIM: 100% EFFECT CH: 512 FX: BAD BULB DIM: 099% Rotate "Left knob" to adjust the value of DIM, CCT and SPD. ⑩FIREWORK RIREWORK setting: rotate "Right knob" to select from DIM ,CCT, SPD (Range: 001…100) and DECAY (Range: 001…100), then rotate "Left knob" to select from DIM ,CCT, SPD and DECAY. EFFECT CH: 512 FX: FIREWORK DIM: 100% EFFECT CH: 512 FX: FIREWORK DIM: 100% Rotate "Right knob" to select from DIM, CCT, SPD and DECAY.
⑪EXPLOSION EXPLOSION setting: rotate "Right knob" to select from DIM, CCT, SPD (Range: 001…100) and DECAY (Range: 001…100), then rotate "Left knob" to select from DIM ,CCT, SPD and DECAY. EFFECT CH: 512 FX: EXPLOSION DIM: 100% EFFECT CH: 512 FX: EXPLOSION DIM: 100% Rotate "Right knob" to select from DIM, CCT, SPD and DECAY. EFFECT CH: 512 FX: EXPLOSION DIM: 100% EFFECT CH: 512 FX: EXPLOSION DIM: 099% Rotate "Left knob" to select from DIM ,CCT, SPD and DECAY.
EFFECT CH: 512 EFFECT FX: WELDING DIM: 000% - 100% CH: 512 FX: WELDING DIM: 099% - 100% Rotate "Left knob" to adjust the value of DIM, CCT, SPD and PAUSE. · Special effects may be upgraded based on the firmware update. Please refer to the latest firmware function description for reference. 4. MENU setting MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to MENU.
①CHANNEL MENU CH: 512 LANGUAGE: ENG MODE Press "Right knob" to MENU. MENU MENU CH: 512 LANGUAGE: ENG CH: 511 LANGUAGE: ENG Rotate "Left knob" to set the channel. ②LANGUAGE MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to MENU. MENU MENU CH: 512 LANGUAGE: ENG CH: 512 LANGUAGE: ENG Rotate "Right knob" to the LANGUAGE and press in.
MENU 菜单 CH: 512 LANGUAGE: ENG 通道: 512 语言: 中文 Rotate "Left knob" to select Chinese or English. ③FAN MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to MENU. MENU MENU CH: 512 LANGUAGE: ENG FAN: ON OUTPUT MODE: MAX Rotate "Right knob" to FAN. MENU MENU FAN: ON OUTPUT MODE: MAX FAN: OFF OUTPUT MODE: MAX Rotate "Left knob" to select ON or OFF. Note: When the fan is turned on, the maximum output of the light will be 100%. When the fan is turned off, the maximum output of the light will be 25%.
④OUTPUT MODE MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to MENU. MENU MENU CH: 512 LANGUAGE: ENG FAN: ON OUTPUT MODE: MAX Rotate "Right knob" to OUTPUT MODE. MENU MENU FAN: ON OUTPUT MODE: MAX FAN: ON OUTPUT MODE: CONST Rotate "Left knob" to select MAX or CONSTANT. ⑤BLUETOOTH MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to switch to the MENU.
MENU MENU CH: 512 LANGUAGE: ENG BT: RRESET SS PROTOCOL: V1.0 Rotate "Right knob" to BT. MENU BT: RRESET SS PROTOCOL: V1.0 BT RESET BACK RESET Press "Right knob" to the interface of bluetooth reset. BT RESET BT RESET BACK RESET BACK RESET Rotate "Right knob" to select RESET. BT RESET BACK RESET MENU CH: 512 LANGUAGE: ENG Press "Right knob" to back to MENU. ⑥WIRELESS PROTOCOL Please refer to P5 for wireless protocol setting.
⑦FIRMWARE UPDATE Insert the USB drive with latest firmware into the light fixture. MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to MENU. MENU MENU CH: 512 LANGUAGE: ENG FW UPDATE: UPDATE VERSION: V1.02.08 Rotate "Right knob" to FW UPDATE. MENU FW UPDATE: UPDATE VERSION: V1.02.08 FOUND FIRMWARE _V1.02.08 BACK UPDATE Press "Right knob" to enter the interface of firmware update. FOUND FIRMWARE _V1.02.08 BACK UPDATE FOUND FIRMWARE _V1.02.08 BACK UPDATE Rotate "Right knob" to the select UPDATE.
FOUND FIRMWARE _V1.02.08 BACK UPDATE FIRMWARE UPDATED Press "Right knob" to make update, it will show "FIRMWARE UPDATED" after the firmware update is finished. ⑧VERSION MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to MENU. MENU MENU CH: 512 LANGUAGE: ENG FW UPDATE: UPDATE VERSION: V1.02.08 Rotate "Right knob" to VERSION to check the firmware version. ⑨Long press the "Right knob" to lock all functions, then the current status can't be changed by any adjustment knobs.
EFFECT CH: 512 FX: CCT LOOP DIM: 100% EFFECT CH: 512 FX: CCT LOOP DIM: 100% Long press the "Right knob" again to release the lock status. 5. Please turn off the fixture when stop using it. Safety Precautions 1. Please open the package to check for damage caused in transit, if damaged please do not use and contact place of purchase or manufacturer as soon as possible. 2. Please do not use a power cord with damaged insulation, do not unplug too hard or drag the power cord directly. 3.
Notice 1. Please take off the COB protective cap before using. 2. Please do not look directly at the emitter when the light is on . 3. Please wait 10 seconds to turn off the light fixture after any parameter setting in order to save it for future use. 4. Please do not place any objects on the light emitter or allow liquid to flow inside the fixture or the emitter. 5. Please do not place the light fixure near the flammable substances like alcohol or gasoline. 6.
Genaral Fault Detection and Diagnosis Fault Detection The light won't boot up properly. The fixture produces light, but the LCD display is not working. LCD display is on but no light output. The fixture has an abnormal flicker. The inside fan can not work. Diagnosis 1. Please check whether the power cable and outlet connection is properly connected or loose. 2. Please check whether the voltage value is within the specified parameters.
Version: V1 2022-04-19 +86-754-85751187 service@nanlite.com +86-754-85300887 Zhanglin,324,Dongli Chenghai Shantou Guangdong China www.nanlite.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.