User's Manual

NOTE:
When finishing network configuration, APP will
display success cue words on the screen.
Due to different internet environment, it is possible
that the device status still display “offline” . If this
situation occurs, it is necessary to pull and refresh
the device list on the APP and make sure the device
status become “online” . Alternatively, user can
turn off the AC power and turn on it again, the device
status will become “online” after few minutes.
USER MANUAL OF SMART KIT
to the Wireless network which you want to use and active
the bluetooth system. Also, you need to forget other irrelevant
Wireless network in case it influences your configuration
process.
1
2
Make sure your mobile device has already been connect
Activate the AP mode (The pictures in the manual are for
explanation purpose only. Your machine may be slightly
different. Please read the WIRELESS MODE IN OWNER'S
MANUAL for detailed operations.).
IMPORTANT NOTE:
Read the manual carefully before connecting your
Smart kit(Wireless module). Make sure to save this
manual for future reference.
1
2
Click " "
Enter your email address
an d password, and then
cl ick " "Registration
VI 5
CAUTION: The following QR Code is only available
for downloading APP. It is totally different with
the QR code packed with unit.
3
Press “ + Add Device ”
4
Press “Scan for nearby
devices”
1
SPECIFICATION
DECLARATION OF CONFORMITY
Model: EU-OSK105/US-OSK105
Standard: IEEE 802. 11b/g/n
Antenna Type: Printed PCB Antenna
Frequency : WLAN 2400~2483.5 MHz
Operation Temperature:0 C~45 C/32 F~113 F
Operation Humidity: 10%~85%
Power Input: DC 5V/300mA
Maximum TX Power: ＜20dBm
5
NETWORK CONFIGURATION
Please keep you APP up to date with the latest version.
Due to special situation may be occurred, we explicitly
claims below: Not all of the Android and i OS syst
em
are compatible with APP. We will not be respons
ible
for any issue as a result of the incompatibility.
W
Cautions
Cautions
Kindly reminder:
Using Android or iOS device to do network configuration
ireless safety strategy
Smart kit only support WPA-PSK/WPA2-PSK
encryption and none encryption .
WPA- PSK/WPA2-PSK encryption is recommend
ed.
Due to different network situation, control proc
ess
may return time-out sometimes. If this situation
occurs, the display between board and App ma
y not
be the same, please do not feel confused.
Smart Phone camera needs to be 5 million pixe
ls or
above to make sure scan QR code well.
Due to different network situation, sometim
es,
request time-out could happen, thus, it is neces
sary
to do network configuration again.
Please C heck The Service Website For More information.
2
PRECAUTIONS
3
DOWNLOAD AND INSTALL APP
4
USER REGISTRATION
Hereby, we declare that this dehumidifier is in
compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU.
A copy of the full DoC is attached.
Applicable system: iOS, Android.
Android
iOS
Android Phone users: scan Android QR code or go to
google play, search ‘NetHome Plus” app and download it.
iOS users: scan iOS QR code or go to APP Store,
search ‘NetHome Plus” app and download it.
Please ensure your mobile device is connected to
Wireless router. Also, the Wireless router has already
connected to Internet before doing user registration and
network configuration.
It is better to log in your email box and active your
registration account by clicking link in case you forget
the password. You can log in with the third party accounts.
It is necessary to forget any other around network and
make sure the Android or i OS device just connect to
the Wireless network you want to configure.
Make sure the Android or i OS device Wireless function
works well and can be connected back to your original
Wireless network automatically.
User must finish all the steps in 8 minutes after powering on
dehumidifier, otherwise you need to power on it again.
9
Follow the above steps to enter “AP” mode.
13
Configuration Success, you can see the device on the list.
The APP system is subject to update without prior notice for
product function improvement. The actual network configuration
process may be slightly different from the manual, the actual
process shall prevail.
Sign up
Wait connecting to
the network
7
Select home Wi-Fi,
enter the password
6
Wait smart devices
to find,then click to
add it
5
Configuration Success,you can see the device
on the list,you can also custom the device name.
8
12
Or choose the
“Manual Setup”
method.
Please enter
password
13
Network configuration
is successful
14
10
Choose the network
configuration method.
11
Choose the “ Scan the
QR code ” method.
NOTE: Steps 10 and 11 are applicable to Android system only.
NOTE: If the
bluetooth connection is failure, please select
the appliance type of Dehumidifier to do the
network configuration.