USER MANUAL OF SMART KIT IMPORTANT NOTE: Read the manual carefully before installing or connecting your Smart kit(Wireless module). Make sure to save this manual for future reference.
CONTENTS 1 2 3 4 5 6 7 8 SPECIFICATION............................................... 1 PRECAUTIONS ............................................... 1 DOWNLOAD AND INSTALL APP.................... 2 INSTALL THE SMART KIT............................... 3 USER REGISTRATION ................................... 4 NETWORK CONFIGURATION......................... 5 HOW TO USE APP............................................ 20 SPECIAL FUNCTIONS......................................
1 SPECIFICATION Model: EU-OSK105,US-OSK105 Standard: IEEE 802. 11b/g/n Antenna Type: Printed PCB Antenna Frequency Band: 2400-2483.5MHz Operation Temperature:0 C~45 C/32 F~113 F Operation Humidity: 10%~85% Power Input: DC 5V/300mA Maximum TX Power: <20dBm 2 PRECAUTIONS Applicable system: iOS, Android. (Suggest: iOS 8.0 or later, Android 4.4 or later) Please keep you APP up to date with the latest version.
Due to different network situation, sometimes, request time-out could happen, thus, it is necessary to do network conf iguration again. The APP system is subject to update without prior notice for product function improvement. The actual network configuration process may be slightly different from the manual, the actual process shall prevail. Please Check The Service Website For More information. 3 DOWNLOAD AND INSTALL APP CAUTION: The following QR Code is only available for downloading APP.
4 INSTALL THE SMART KIT(wireless module) 1 Remove the protective cap of the smart kit (wireless module) 2 Open the front panel and insert the smart kit (wireless module) into the reserved interface. 3 Attach the QR code packed with Smart kit (wireless module) to the side panel of the machine, ensure it is convenience to be scanned by the mobile phone. Alternatively, user can take picture of the QR Code and save it into their own phones.
5 USER REGISTRATION VI5 Please ensure your mobile device is connected to Wireless router. Also, the Wireless router has already connected to Internet before doing user registration and network configuration. It is better to log in your email box and active your registration account by clicking link in case you forget the password. You can log in with the third party accounts.
2 Enter your email address and password, and then click " Registration " 5
6 NETWORK CONFIGURATION Cautions It is necessary to forget any other around network and make sure the Android or i OS device just connect to the Wireless network you want to configure. Make sure the Android or i OS device Wireless function works well and can be connected back to your original Wireless network automatically. Kindly reminder: User must finish all the steps in 8 minutes after powering on air conditioner, otherwise you need to power on it again.
5 Press “ + Add Device ” 7
6 Press “Scan for nearby devices” 7 Wait smart devices to find, then click to add it 8
9 Wait connecting to the network 8 Select home Wi-Fi, enter the password 9
10 Configuration Success,you can see the device on the list, you can also custom the device name.
11 Bluetooth setting is successful NOTE: If the bluetooth connection is failure, please select the appliance type of Split type to do the network configuration.
12 If the Bluetooth setting is not successful, please follow the above steps to enter “AP” mode.
13 Choose the network configuration method. 14 Choose the “ Scan the QR code ” method. NOTE: Steps 13 and 14 are applicable to Android system only. iOS system does not need these two steps.
15 Or choose the “Manual 16 Please enter password Setup” method.
17 Network configuration is successful 15 18 Configuration Success, you can see the device on the list.
NOTE: When finishing network configuration, APP will display success cue words on the screen. Due to different internet environment, it is possible that the device status still display “offline” . If this situation occurs, it is necessary to pull and refresh the device list on the APP and make sure the device status become “online” . Alternatively, user can turn off the AC power and turn on it again, the device status will become “online” after few minutes.
7 HOW TO USE APP Please ensure both your mobile device and air conditioner are connected to the Internet before using app to control the air conditioner via internet, please follow the next steps: cc 2 Choose the air conditioner.
3 Thus, user can control air conditioners on/off status, operation mode, temperature, fan speed and so on. NOTE: Not all the function of the APP is available on air conditioner. For example: ECO, Turbo, Swing function, please check the user manual to find more information.
8 SPECIAL FUNCTIONS Including: Timer on, Timer off, 8 C Heat, Sleep, Check. NOTE: If the air conditioner do not support the above function, the function will be hided from the function list. Schedule Weekly, user can make an appointment to turn on or off AC on specific time. User also can choose circulation to keep the AC under schedule control every week.
20
Sleep User can customize their own comfortable sleep by setting target temperature.
Check User can simply check the AC running status with this function. When finishing this procedure, it can display the normal items, abnormal items, and detail information.
Share Device The air conditioner can be controlled by multi-users at the same time by Share Device function. 1 Click " Share device " 22 2 QR code display.
3 The other users must log 4 Now the others can in " Nethome Plus " app add the shared device. first, then click "Add Share Device " on their own mobile, then ask them to scan the QR code.
CAUTIONS: WIFI module models: US-OSK105, EU-OSK105: FCC ID:2AS2HMZNA21 IC:24951-MZNA21 This device complies with Part 15 of the FCC Rules and it contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Company will not be liable for any issues and problems caused by Internet, Wireless Router and Smart Devices. Please contact the original provider to get further help.
此页内容无需印刷 技术要求： 铜版纸105克， 74mm*105mm 彩色印刷 基准说明书为单英文版，无商标，制造商信息， 也无欧盟区域DOC内容，只是兼容了欧盟RED 指令信息和北美 FCC指令等内容(P29-P30页)。 由业务根据销售的区域及客户要求，通知订单 对内容进行修订，欧盟地区需要由业务添加 DoC合规声明文件（建议放在说明书倒数 第二页），将完整说明书电子档提交给制单。
