USER MANUAL OF SMART KIT IMPORTANT NOTE: Read the manual carefully before installing or connecting your Smart kit(Wireless module). Make sure to save this manual for future reference.
CONTENTS 1 2 3 4 5 6 7 8 SPECIFICATION............................................... 1 PRECAUTIONS ............................................... 1 DOWNLOAD AND INSTALL APP.................... 2 INSTALL THE SMART KIT............................... 3 USER REGISTRATION ................................... 4 NETWORK CONFIGURATION......................... 5 HOW TO USE APP............................................ 16 SPECIAL FUNCTIONS......................................
1 SPECIFICATION Model: OSK102,EU-OSK103,US-OSK103 Standard: IEEE 802. 11b/g/n Antenna Type: Printed PCB Antenna Frequency : WLAN 2400~2483.5 MHz Operation Temperature:0 C~45 C/32 F~113 F Operation Humidity: 10%~85% Power Input: DC 5V/300mA Maximum Transmitted Power: 19.8dBm Max 2 PRECAUTIONS Applicable system: iOS, Android. (Suggest: iOS 8.0 or above, Android 4.0 or above) Please keep you APP up to date with the latest version.
Due to different network situation, sometimes, request time-out could happen, thus, it is necessary to do network conf iguration again. The APP system is subject to update without prior notice for product function improvement. The actual network configuration process may be slightly different from the manual, the actual process shall prevail. Please Check The Service Website For More information. 3 DOWNLOAD AND INSTALL APP CAUTION: The following QR Code is only available for downloading APP.
4 INSTALL THE SMART KIT(wireless module) 1 Remove the protective cap of the smart kit (wireless module) 2 Open the front panel and insert the smart kit (wireless module) into the reserved interface. 3 Attach the QR code packed with Smart kit (wireless module) to the side panel of the machine, ensure it is convenience to be scanned by the mobile phone. Alternatively, user can take picture of the QR Code and save in into their own phone.
5 USER REGISTRATION VI5 Please ensure your mobile device is connected to Wi-Fi router. Also, the Wireless router has already connected to Internet before doing user registration and network configuration. It is better to log in your email box and active your registration account by clicking link in case you forget the password. You can log in with the third party accounts.
6 NETWORK CONFIGURATION Cautions It is necessary to forget any other around network and make sure the Android or i OS device just connect to the Wireless network you want to configure. Make sure the Android or i OS device Wireless function works well and can be connected back to your original Wireless network automatically. Kindly reminder: User must finish all the steps in 8 minutes after powering on AC, otherwise you need to power on it again.
5 Press “ + Add Device ” 6 Select the appliance you are setting up 6
7 Follow the above steps to enter “AP” mode.
9 Choose the “ Scan the QR code ” method. 8 Choose the network configuration method.
9 Or choose the “Manual 10 Please enter password Setup” method.
WLAN WLAN WLAN 11 Network configuration is successful 10 12 Configuration Success, you can see the device on the list.
1 2 3 4 Using iOS device to do network configuration Make sure your mobile device has already been connected to the Wireless network which you want to use. Also, you need to forget other irrelevant Wireless network in case it influences your configuration process. Disconnect the power supply of AC(some units). Connect the power supply of AC, and continuously press the “LED DISPLAY” button or “DO NOT DISTURB” button seven times in 10 seconds.
7 Follow the above steps to enter “AP” mode.
8 Connect to the Wireless network.
WLAN WLAN WLAN 11 Configuration Success, 10 Network configuration is you can see the device on the list.
NOTE: When finishing network configuration, APP will display success cue words on the screen. Due to different internet environment, it is possible that the device status still display “offline” . If this situation occurs, it is necessary to pull and refresh the device list on the APP and make sure the device status become “online” . Alternatively, user can turn off the AC power and turn on it again, the device status will become “online” after few minutes.
7 HOW TO USE APP Please ensure both your mobile device and air conditioner are connected to the Internet before using app to control the air conditioner via internet, please follow the next steps: S I M! 082 cc 2 Choose the air conditioner.
3 Thus, user can control air conditioners on/off status, operation mode, temperature, fan speed and so on. NOTE: Not all the function of the APP is available on air conditioner. For example: ECO, Turbo, Swing function, please check the user manual to find more information.
8 SPECIAL FUNCTIONS Including: Timer on, Timer off, 8 C Heat, Sleep, Check. NOTE: If the air conditioner do not support the above function, the function will be hided from the function list. Timer on/Timer off Weekly, user can make an appointment to turn on or off AC on specific time. User also can choose circulation to keep the AC under schedule control every week.
19
8 C Heat User can let the AC run under 8 C Heat by one-click. When people go outside, this function can protect your furniture from frost damage.
Sleep User can customize their own comfortable sleep by setting target temperature.
Check User can simply check the AC running status with this function. When finishing this procedure, it can display the normal items, abnormal items, and detail information.
Share Device The air conditioner can be controlled by multi-users at the same time by Share Device function. 1 Click " Share device " 23 2 QR code display.
3 The other users must log 4 Now the others can add the shared device. in Nethome Plus app first, then click Add Share Device on their own mobile, then ask them to scan the QR code.
CAUTIONS: For models US-OSK103, EU-OSK103: For model OSK102 : FCC ID: 2AS2HMZNA19 FCC ID: 2AS2HMZNA18 IC: 24951-MZNA19 IC: 24951-MZNA18 T his d evice co mplies with Pa rt 1 5 o f the F CC R ules and In dustry Can ada's lice nce-exemp t RSS standards. . Operat ion is sub ject to the f ollow in g two con d ition s: (1) T his d evice may not cause int erferen ce; a nd (2) T his d evice must accep t a ny in terfe re nce , including inte rf erence tha t may ca use und esire d op erat ion of the de vice .
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Manufacturer: Guangdong Meizhi Compressor Co.,Ltd. Shunfengshan Industrial Devp. Z Zone, 528311 Shunde,Foshan,city, Shunde,528333,Foshan Guangdong, Guangdong, PEOPLE'S REPUBLIC OF CHINA Company will not be liable for any issues and problems caused by Internet, Wireless Router and Smart Devices. Please contact the original provider to get further help.