MODEL: ITVS-200B 6-IN-1 NOSTALGIC ENTERTAINMENT CENTER Important Safety Instructions.........................................................................................................................3 Product Overview ..........................................................................................................................................4 Setup / Basic Operation ..........................................................................................................................
Listening to a Vinyl Record............................................................................................................................7 Listening to a CD...........................................................................................................................................8 Listening to the FM Radio .............................................................................................................................
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVERTISSEMENT: RISQUE DE CHOC ÉLECTRIQUE – NE PAS OUVRIR. ‐ This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non‐insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. ‐ Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user‐serviceable parts inside.
15. -This lig ghtning flash with h arrowhead symbol within an equ uilateral triangle is intended to ale ert the user to the presencce of non-insulate ed “dangerous vo oltage” within the e product’s enclo osure that may be e of sufficient magnitu ude to constitute a risk of electric shock. -Warnin ng: To reduce the e risk of electric shock, s do not rem move cover (or ba ack) as there are e no user-serviceable parts in nside. Refer servvicing to qualified d personnel.
1. P POWER Push to turn the unit ON or OFF. 2. “PHONO, CD, AUX, A FM/ ” SE ELECTION KNO OBRotate to se elect your desire ed function. 3. “FM”, “ ” SLID DE SWITCHSlid de to select eith her FM or Blueto ooth. mm AUX IN JA ACKConnectsyo our external source to the AUX IN jack. 4. 3.5m 5. PLA AY INDICATOR RIlluminates whe en CD is playing g. 6. ST//BT INDICATOR R Blue light flash hes when the unit is waiting forr pairing. Blue lig ght stays lit whe en the external device e is connected to o the unit.
Rear View 24. FM wire antenna While tuned to a station in FM mode, extend the wire and reposition to adjust for best reception. 25. LINE OUT jacks For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA cable into the unit. Insert the opposite end into the amplifier device. Be sure to connect the white plug to the white jack and the red plug to the red jack. 26. AC Power Cord Connect the AC plugs into a wall outlet.
Setup / Basic Operation Setup 1. Remove white protective needle cover by gently pulling towards front of unit. 2. Remove any packaging materials from the unit. 3. Connect the AC power cord to a wall outlet. Note: -It is strongly recommended that this product should be operated only from the type of power source indicated on the marking label. -To prevent interference, avoid bundling audio signal cables together with the AC power cord. Basic Operation 1. Push the POWER button to turn the unit on. 2.
7. When the record reaches its end, tone arm will stop at the center of the record and you must lift and return the tone arm to the tone arm rest manually. Lock the tone arm-rest holder to protect the tone arm. Important: - Closing the top cover will help prevent dust from settling on the turntable. - Always relock the tone arm clip beforetransporting the unit. - Do not place anything on top of the turntable cover, especially while playing a record. Listening to a CD 1. Select “CD” function.
3. “PROGRAM” indicator lights up and “01”blinks on the display. 4. Press ( or )to select a track number. 5. Press the PROGRAM button again to set the next program track, “02” appears and blinks.. Repeat steps 4 thru 5 to program the additional tracks. 6. When the selection of track numbers has been finished, press the PLAY button ( ) to startprogram playback. (Note: when all 20 program tracks are set, you press PROGRAM button and “FU” will appears on the display) 7.
In BT (Bluetooth) mode, this unit can play music from external devices whichhave a built-in Bluetooth feature. GETTING CONNECTED USING BLUETOOTH 1. Select “FM/ ” mode. 2. Slide the slide switch on “ ” and the ST/BT indicator will flash blue. 3. Turn ON the Bluetooth function on your external device. NOTE: The effective distance between your external device and this apparatus is 10 meters (33ft). 4.
• • • • To clean a record, use a soft anti-static cloth to gently wipe the record surface. Keep records in their protective sleeves when not in use. Always store records upright on their edges Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.), or in a location subject to vibration, excessive dust, heat, cold or moisture. General Care When removing the power plug from the wall outlet, always pull directly on the plug. Never pull the cord.
Specifications GENERAL Power Requirements Power Consumption Dimensions (W x H x D) Weight AC 100-240V~50/60Hz 30W 460 x 255 x 340mm | 18 x 10 x 13.4in(approx.) 7 kg. | 16 lbs (approx.) AMPLIFIER Output Power Frequency Response 5W+5W 60 to 20,000 Hz SPEAKER SYSTEM Type Impedance Output Power 2-way 8 ohms Max.
Troubleshooting Guide Symptom Possible Cause Solution • Unit will not power on. • Unit • Connect sound output from speakers. • The • The TAPE GENERAL • No • Noise/Distortion in FMRADIO CD PLAYER • The unit is too close to a TV set or another interfering device. • Turn cassette tape is not inserted properly. • The tape has reached the end. • The station is not tuned-in properly. • A TV set is being used nearby and is interfering with the radio reception.
sound Bluetooth • No • Sound has a lot of static • Unable to pair with a Bluetooth device • The unit is not switched to Bluetooth mode • Your device’s and/or the unit’s volume is not turn up. • Your device is too far from the unit or there’re some obstacle between your device and the unit • Your device is too far away • Your device doesn’t have Bluetooth connectivity. • The Bluetooth pairing is not successful • Ensure the unit is switched to BT mode.
FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Innovative Technology Electronics Corp. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics Corp. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace the product if it is determined to be defective at “No Charge”.
200B140700E 18
