Operating Manual Model: E-5201 CD SHELF SYSTEM
CONTENT INTRODUCTION..................................................................................................................................3 IMPORTANT SAFETY INSTRUCTIONS...................................................................................................3 SAFETY INFORMATIONS........................................................................................................................4 BEFORE USE ..............................................................................
INTRODUCTION Thank you for buying this product. To help you to have more fun when using this product, read these instructions thoroughly. And then save this instruction manual for future reference. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions- The safety and operating instructions should be retained for future reference. 3.
presence of important operating and maintenance instructions in the literature accompanying the appliance. 16. This equipment is a Class Ⅱ or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 17. The mains plug is used as disconnect device, the disconnect device shall remain readily operable. 18. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
8. of time, such as a vacation. Keep this manual in a safe place for future reference. BEWARE OF CONDENSATION When the player (or a compact disc) is moved from a cold to a warm place or is used after a sudden temperature change, there is a danger of condensation. Water vapor in the air could condense on the mechanism or the laser pickup. If droplets of water form on these parts, correct playback will be impossible because the laser cannot read the information from the disc correctly.
BUTTONS AND CONTROLS MAIN UNIT A. POWER BUTTON B. PHONE SOCKET C. AUX IN 1 SOCKET D.FUNCTION BUTTON E. BALANCE KNOB F. IR G. STOP BUTTON H. VOLUME KNOB I. (PREVIOUS) BUTTON J. PLAY/PAUSE BUTTON K. BASS BUTTON L. (NEXT) BUTTON M. SCAN BUTTON N. TREBLE BUTTON O. TUNING DOWN BUTTON P. TUNING UP BUTTON Q. DISPLAY R. EJECT/ENTER BUTTON S. CD COMPARTMENT T&U. DISPLAY OF VOLUME V. AC POWER CORD W. FM ANTENNA X. SPEAKER INPUT SOCKET (LEFT&RIGHT) Y.
REMOTE CONTROL UNIT A. FUNCTION BUTTON: Select a source. B. ON/STANDBY BUTTON: Set the unit ON or STANDBY. C. RANDOM: Select to a random playback. D. BALANCE (RIGHT): Select the right speaker to adjust treble or bass E. BALANCE (LEFT): Select the left speaker to adjust treble or bass F & N. TREBLE(+/-): Act as “up”or “down”treble G&Q. VOLUME + / - BUTTON: Adjust the volume level. H&S. (NEXT) BUTTON/ (PREVIOUS) BUTTON: skip backward or forward. I. PLAY/PAUSE BUTTON: Pause and resume playback. J&T.
GET STARTED CONNECTING EXTERNAL SPEAKERS The speaker input sockets locate at the back of the main unit. Unwrap the speaker wire from the left speaker and plug it into the left (L) speaker socket on the main unit. Unwrap the speaker wire from the right speaker and plug it into the right (R) speaker socket on the main unit. Make sure the speaker cables will not run in areas where they could cause danger.
ADJUSTING THE VOLUME VOLUME ADJUSTMENT Twist the VOLUME KNOB to adjust the volume The volume setting will be displayed briefly on a scale display on the left upper corner of the unit. BALANCE Twist the Balance Knob to adjust the volume between the left speaker and the right speaker. The volume of the left speaker and right speaker is equal when the LED display shows “00” by switching the balance knob.
2. Press (NEXT) BUTTON/ (PREVIOUS) BUTTON to select a track. The display shows the selected track. 3. Press the PROGRAM button on the remote control to add the track into the program list. 4. Repeat steps 2 and 3 to till you accomplish the programming. You can program up to 20 tracks. TO START THE PROGRAM PLAY Press PLAY/PAUSE button. TO PAUSE OR STOP A PROGRAM PLAY Press PLAY/PAUSE or STOP button. TO REPLAY A PROGRAM Press PLAY/PAUSE button.
3. If the disc becomes dirty, wipe the surface from the center hole outward towards the outer edge with a soft, dry cloth. 4. Never use such chemicals as record spray, antistatic sprays or fluid, benzine or thinner to clean the discs. Such chemicals will do irreparable damage to the disc's plastic surface. 5. Discs should be returned to their cases after use to avoid serious scratches that could cause the laser pick up to skip. 6.
AUX IN OPERATION Any external (auxiliary) audio source (i.e., personal CD player or MP3 player) connected to this appliance can get necessary signal and channel the speaker outputs. The unit has 2 AUX INs. AUX IN 1 SOCKET at the front of the unit, AUX IN 2 SOCKET at the rear of the unit. 1. Press POWER button to turn the unit ON and then press FUNCTION button to select “AUX1” or “AUX2”. 2. Set the volume level to the minimum level with the VOLUME KNOB. 3.
USING THE REMOTE CONTROL The Remote Control Unit can operate the unit from a distance. When operating the remote control unit, point it towards the front panel of the unit. • • Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control.
TROUBLESHOOTING GUIDE In case of trouble with the unit, please look through problems below and see if you can solve them yourself before calling your dealer. THE WHOLE UNIT Problem Power does not come on when the power switch is pressed. No sound comes out of the speakers. CD PLAYER TUNER UNIT The sound is noisy. Cause • Unit is unplugged. • The external speakers are disconnected. • The volume is turned down (to MIN). • The input selector does not match the playback source.
SPECIFICATIONS AMPLIFIER section Output Power Frequency Response TUNER section FM Section Frequency Range CD PLAYER section Frequency Response Signal-to-Noise Ratio SPEAKER SYSTEM section Impedance Input Power ….............................. ….............................. 25W + 25W 60 to 20, 000 Hz ….............................. 87.5 to 108 MHz ….............................. ….............................. 60 to 20, 000 Hz 55 dB (IEC-A) ….............................. …............................
FCC STATEMENT Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
