MODEL: ITCDS-5000 Digital Tuning FM / CD player w Bluetooth/Aux-in and External Stereo Speakers 1
CONTENT INTRODUCTION..................................................................................................................................3 IMPORTANT SAFETY INSTRUCTIONS...................................................................错误!未定义书签。 BUTTONS AND CONTROLS .................................................................................................................5 REMOTE CONTROL UNIT ..................................................................................................
INTRODUCTION Thank you for buying this product. To help you to have more fun when using this product, read these instructions thoroughly. And then save this instruction manual for future reference. IMPORTANT SAFETY INSTRUCTION 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference. 3.
16. Only use attachments/accessories specified or provided by the manufacturer 17. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus. 18. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
BUTTONS AND CONTROLS MAIN UNIT L. (NEXT) BUTTON M. SCAN BUTTON N. TREBLE BUTTON O. TUNING DOWN BUTTON P. TUNING UP BUTTON Q. DISPLAY R. EJECT/ENTER BUTTON S. CD COMPARTMENT T&U. DISPLAY OF VOLUME A. POWER BUTTON B. PHONE SOCKET C. AUX IN SOCKET D.FUNCTION BUTTON E. BALANCE KNOB F. IR G. STOP BUTTON H. VOLUME KNOB I. (PREVIOUS) BUTTON J. PLAY/PAUSE BUTTON K.
REMOTE CONTROL UNIT A. FUNCTION BUTTON: Select a source. B. ON/STANDBY BUTTON: Set the unit ON or STANDBY. C. RANDOM: Select to a random playback. D. BALANCE (RIGHT): Select the right speaker to adjust treble or bass E. BALANCE (LEFT): Select the left speaker to adjust treble or bass F & N. TREBLE(+/-): Act as “up”or “down”treble G&Q. VOLUME + / - BUTTON: Adjust the volume level. H&S. (NEXT) BUTTON/ (PREVIOUS) BUTTON: skip backward or forward. I. PLAY/PAUSE BUTTON: Pause and resume playback. J&T.
GET STARTED CONNECTING EXTERNAL SPEAKERS The speaker input sockets locate at the back of the main unit. Unwrap the speaker wire from the left speaker and plug it into the left (L) speaker socket on the main unit. Unwrap the speaker wire from the right speaker and plug it into the right (R) speaker socket on the main unit. Make sure the speaker cables will not run in areas where they could cause danger.
ADJUSTING THE VOLUME VOLUME ADJUSTMENT Twist the VOLUME KNOB to adjust the volume The volume setting will be displayed briefly on a scale display on the left upper corner of the unit. BALANCE Twist the Balance Knob to adjust the volume between the left speaker and the right speaker. The volume of the left speaker and right speaker is equal when the LED display shows “00” by switching the balance knob.
3. Press the PROGRAM button on the remote control to add the track into the program list. 4. Repeat steps 2 and 3 to till you accomplish the programming. You can program up to 20 tracks. TO START THE PROGRAM PLAY Press PLAY/PAUSE button. TO PAUSE OR STOP A PROGRAM PLAY Press PLAY/PAUSE or STOP button. TO REPLAY A PROGRAM Press PLAY/PAUSE button. TO REVIEW THE CONTENT OF A PROGRAM Press STOP button then keep pressing the PROGRAM button to review the programmed tracks.
the laser pick up to skip. 6. Do not expose discs to direct sunlight or high humidity and temperature for extend periods. Long exposure to high temperatures will wrap the disc. 7. Printable CD-R and CD-RW discs are not recommended, as the label side might be sticky and damage the unit. 8. Use a soft oil-based felt-tipped pen to write the information on the label side. Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side. 9.
AUX IN OPERATION Any external (auxiliary) audio source (i.e., personal CD player or MP3 player) connected to this appliance can get necessary signal and channel the speaker outputs. 1. Press POWER button to turn the unit ON and then press FUNCTION button to select “AU”. 2. Set the volume level to the minimum level with the VOLUME KNOB. 3. Plug the AUX IN cable (not included) into the AUX IN socket at the rear of the unit. 4.
if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other appliances may operate incorrectly. TO ACTIVATE THE REMOTE CONTROL: The remote control is built with cell battery before shipment. To activate the battery, remove the transparent plate at the bottom of the remote control. Now the remote control is ready to use.
TROUBLESHOOTING GUIDE In case of trouble with the unit, please look through problems below and see if you can solve them yourself before calling your dealer. THE WHOLE UNIT Problem Power does not come on when the power switch is pressed. No sound comes out of the speakers. CD PLAYER TUNER UNIT The sound is noisy. Cause • Unit is unplugged. • The external speakers are disconnected. • The volume is turned down (to MIN). • The input selector does not match the playback source.
SPECIFICATIONS AMPLIFIER section Output Power Frequency Response TUNER section FM Section Frequency Range CD PLAYER section Frequency Response Signal-to-Noise Ratio SPEAKER SYSTEM section Impedance Input Power ….............................. ….............................. 25W + 25W 60 to 20, 000 Hz ….............................. 87.5 to 108 MHz ….............................. ….............................. 60 to 20, 000 Hz 55 dB (IEC-A) ….............................. …............................
FCC STATEMENT Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARRANTY Innovative Technology Electronics Corp. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics Corp. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace the product if it is determined to be defective at “No Charge”.