Instruction Manual

K3-BT-1 instruction manual

1. Model: k3-BT-1 Bluetooth version 5.0 + Power: 2 * 15W

2. Appearance dimension: 46mm * 76mm, with 3mm diameter screw holes around.

three Instructions: refer to the silk screen on PCB for wiring.

four Service conditions:

(1) Power supply range: DC 8-15v; Current 2-3a (power greater than 30W)

(2) Speaker * 2: 4 / 6 / 8 ohm, greater than 15W

(3) Connecting line: 2.54 spacing of 3 2PS, and the length is determined by the customer.

Note: do not connect the positive and negative stages of the power supply reversely.

five Parameter test:

(1) Bluetooth mobile phone connection test or Bluetooth test box test.

(2) Test conditions: DC12V power supply 3a, 1kHz 0dB sinusoidal signal 4 Ω load:

A: Frequency response: 20Hz-20KHz

B: SNR: 2% distortion, 75db

C: Resolution: 70dB

D: Power output: distortion 1% 2 * 10W; Distortion 10% 2 * 15W

E: Rated power: 2 * 15W, (the power amplifier has overheating protection and overvoltage

protection)

F: Bluetooth distance: more than 10m

G: Rated voltage: 15V

6. Hardware introduction:

(1) Master IC: Jerry ac6925a, stereo output, Bluetooth version is 5.0

(2) Power amplifier: 2 * 15W stereo, cs8655

PAGE 1
K3-BT-1 instruction manual 1. Model: k3-BT-1 Bluetooth version 5.0 + Power: 2 * 15W 2. Appearance dimension: 46mm * 76mm, with 3mm diameter screw holes around. three Instructions: refer to the silk screen on PCB for wiring. four Service conditions: (1) Power supply range: DC 8-15v; Current 2-3a (power greater than 30W) (2) Speaker * 2: 4 / 6 / 8 ohm, greater than 15W (3) Connecting line: 2.54 spacing of 3 2PS, and the length is determined by the customer.
PAGE 2
7. Function Description: (1) When the machine is turned on, it will automatically enter the Bluetooth state, wait for connection, and there is no prompt tone (2) Find the Bluetooth name in the device: "IR sauna", and the connection will prompt "Ding Dong" and rotary sound (3) When the Bluetooth device is disconnected, it will also prompt "Dong" and rotary tone.