@ BELL SOUTH 900 MHz CORDLESS CALLER ID TELEPHONE WITH CALL WAITING 40 CHANNEL AUTO SCAN Model 9919 OWNER'S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS PLEASE READ THIS MANUAL CAREFULLY BEFORE USE. KEEP FOR YOUR REFERENCE.
LATTE Em = proper care and by following the setup and user instructions in this manual, this unit will provide you with years of trouble free service Bell South is committed to providing quality products that fit your needs, We would like to have any comments or suggestions you might have on this product. You may mail your comments ta: U.S.
Special Features CALLER ID SYSTEM Multi-Function Large LCD Screen Shows the number you are dialing and. with Caller ID service (available through subscription farm your local telephone company), displays information about the caller before you answer the call, Name and Number Directory Stores up to 40 names and numbers so that you can call them with a single key stroke. Caller List Available with caller ID service. Stores up to 80 calls to keep track of everyone who called.
NEW CALLS LARGE LCD SCREEN MESSAGE WAITING Pg.5 INDICATOR Pg. 6, 17-18 DIRECTORY BUTTON VOLUME CONTROL Pg. (Hl, MED, LOW) SWITCH Pg. 6,27 TALK BUTTON REDIAL PAUSES Pg. 6, 10-11, 15-15, SAVE BUTTON 16, 23.24 21.23, 26-28 SCROLL UP-DOWN/ 1+ DIAL BUTTON SHIFT LEFT-RIGHT Pg. 6. 18,19, 21, 23-24 Boron Pg. 8, 17-29 TELEPHONE KEYPAD 10 DIAL BUTTON. b— 21-23. 23.24 25.29 7 DAY DELETE/SCAN TONE BUTTON BUTTON Fa. 15, 21, 23-24 Pg. 6, 19-20, 22-24, 5.6, 16, 18,21, 23-2 a FUNCTION BUTTON EDIT/FLASH BUTTON Pg.
018p ps IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, always follow these basic safety precautions when using your cordless telephone equipment. ’ Read and understand all instructions. Folio all warnings and instructions marked on the telephone. Unplug this telephone from the wall outlet before cleaning or replacing the battery pack. Do not use liquid cleaners or aerosol cleaners, Use a damp cloth for cleaning. If necessary, use only a mild soap. .
£. if the telephone exhibits a dis tin change in performance. 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14, Do not use the telephone to report a gas leak in the vicinity of the leak. 15. Never install telephone wiring during a lightning storm. 46. Never install telephone Jacks in wet locations unless the jack is specifically designed for wet locations. 47.
1 Sensurround | e-abeam 9620 (CALLER 10) SYSTEM HANDSET Controls 4, HANDSET ANTENNA 2. Large LCD Screen: Shows call information, phone status prompts and directory items. 3, DIR. {Directory} Button: Press to access names and numbers stored in the DIRECTORY. (See page 20 to 24 for details.) 4.
HANDSET Controls Button: (1+) Press and hold down to place a dong distance calls. {Automatically adds the number 1 at the beginning of the displayed telephone number.) . 10 Digit/d Button: Press and hold down to place a local call with Area Code. , 7 Digit TONE/% Button: (7 Digit) Press and hold down to place a local call.
BASE UNIT Controls Power-In Connection Jack . Telephone Line Connection Jack . Tone/Pulse Select Switch . Antenna: Raise or reposition for best reception. . IN SURCHARGE indicator: (IN USE) Lights up to indicate that the HANDSET is in TALK Mode or an extension phone is in use. {CHARGE) Lights up when the HANDSET is placed on the BASE UNIT for charging, 6. PAGE Button: Press {o page the HANDSET. 7. Charge Terminals: For charging the HANDSET battery pack.
Connecting Your Phone This section is a reference guide to the basic functions and operations of your cordials telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1. 1. Carefully remove your cordless telephone from its shipping carton. if there is any visible damage, da not attempt to operate this equipment. Return it to the place of purchase. 2.
BASE UNIT ANTENNA TONE PULSE TELEPHONE. SWITCH CONNECTION JACK POWER-N SOURCE (T lL 120V WALL L OUTLET b— AC ADAPTER 3. Insert the small plug on the end of the AC adapter into the POWER-IN connection jack at the back of the BASE UNIT. : “4, Plug the AC adapter into a 120V. AC wall outlet. oh A USE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 300mA. 5. insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and the other end into the telephone line jack at the back of the BASE UNIT.
BE Ene 3 GAMBLER SYSTEM ® 2 Press the button to confirm that you have a dial tone. If you do not gate dial tone, review steps 3 through 8. if you stile have no dial tone, refer to the Problem Salving section on page 33. + 10. Before initial use, charge the HANDSET for 12 hours. You are now ready fo use your new Bell South Cordless Telephone. IMPORTANT In order to utilize the Caller ID feature, you must subscribe to Caller ID towards your focal phone company. 9B19p1.
Desk Mounting Desk Mounting One of the special features of your telephone is the unique design of the MOUNTING BRACKET which can hold your phone at an angle of 30° when desk mounting. There are two positions to choose from: 1. NORMAL POSITION {Mounding Bracket not required) For normal position, as shown in Figure 1, place the BASE UNIT on any desired but suitable location. FIGURE 1 2.
Wall Mounting You may choose to put the BASE UNIT of your cordless telephone on a wall. 4. With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE LINE CORD to the telephone line jack. ! 2. Insert the SHORT TELEPHONE LINE CORD through the hole of the MOUNTING BRACKET. 3. Insert the hooks of the MOUNTING BRACKET (marked “WALL MOUNT"; into the matching slots of the BASE UNIT (as shown below). Then slide the MOUNTING BRACKET into place as indicated by the arrow.
Cordless Telephone Operation Preparing for Use Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require recharging of the battery pack more often. 1. Place the HANDSET on the BASE UNIT for 12 hours. 2. After 12 hours, remove the HANDSET from the BASE UNIT. 3. Raise or reposition the BASE UNIT antenna for best reception.
Receiving Calls When the phone rings, fight the HANDSET 1. NOTE: The Call Timer will start to count once you press the (TALK) button. and press the UNIT IN USE LED indicator will fight up, 2. Start your conversation. . To end your conversation, either press the button or place the HANDSET on the BASE UNIT. If you place the HANDSET on the BASE UNIT charge button, The BASE cradle, you activate the automatic STANDBY feature. Call Timer Display Extension Phones Extension telephones can be connected.
Placing Calls 1. Press the bunion, the Call Timer starts to count. The BASE UNIT IN USE LED indicator will light up. 2, Listen for a dial tone. 3. Dial the phone number. 4, When you have finished with your call, press the button again. The BASE UNIT IN USE LED indicator will turn off. OR . Dial the phone number. 2. Press and hold down the 7-Digit or 10-Digit or 1+ EE) button. The BASE UNIT IN USE LED indicator will fight up. 3.
Caller ID System This telephone automatically displays incoming caller's name and telephone number together with the date and time of the call It records up to 80 calls and stores the data in memory. IMPORTANT: You must subscribe to the Caller ID service from your local telephone company to utilize this feature, Viewing Caller Information During Incoming Calls 1. When there is an incoming call, the name and the telephone number of the caller will automatically appear after the second ring.
Caller ID System Operation Call Waiting When you have subscribed for Call Waiting service from your local telephone company, this telephone can indicate the name and number of the second caller while you are having a conversation. 4. When you are having a conversation, this eg. . telephone will automatically display the name FEEL EARN and number of the second caller. BEE 2. Press the (FLASH) button to answer the second 1st Caller caller. The first caller's name and number will be i e.g. displayed.
Placing a Call from the Caller List 1. Press the scroll down (v) button to select from the latest record, or press the scroll up (a) button to select from the first record, 2. Press and hold down the 7-Digit (Ete) button for local call, or the 10-Digit button for local call with area code, or the 1+ button for long distance call. 3. To end your conversation, either press the button or place the HANDSET on the BASE UNIT.
Caller ID System Operation Deleting All Records in the Caller List 1. Press and hold down the (DELETE) button at the STANDBY Mode. 2. The LCD screen will automatically arboretum STANDBY Mode. ALL DELETE F000“ Bell ron} Selective Deleting in the Caller List 1. Press the scroll up or down (a or ¥) button to find the caller at STANDBY Mode. TT 2. Press and hold down the {BEETLE) button, {ais DELETE then the LCD screen will display the next [PRT item in the directory, sw vee 3.
Saving in the Directory 1. Press the £815) button. 2, Press the button. . 3. Use the TELEPHONE KEYPAD button (0~8} to enter the name, (see page 29 for detail) you can store up to 15 characters. 4. Press the scroll down {) button once. §. Enter the telephone number using the TELEPHONE KEYPAD bunion You can store up to 16 digits. 6. Press and hold down the (SAVED button. 7. Press the button to go back to STANDBY Mode.
Caller ID System Operation Editing Name and Number in the Directory 1. Press the button. 2. Press the scroll up or down (a or ¥) butt onto find the one you want to edit. ALE BOVINE 5455S iz 12 3. Press the button to edit the name. —medley BROWN 604555 12 i 8 cursor is blinking 4. Press the shift left or right (« or button to move the cursor to the letter or number you want tg change. To erase; press the (BELLED button. To add, use the TELEPHONE KEYPAD buttons 0~9). (see page 29 for details.) 5.
Editing the Number in the Directory before Dialing 1. Press the button. 2. Press the scroll up or down (4 or w} button fo find the caller. 3. Press the (EDIT) bunion to edit the name. 4. Press the scroll down (v) bunion, eg. BLED. £ RUIN = cursor Is blinking ll oneself 5, Press the shift left or right («a or »} button to move the cursor to the number you want to sang! To erase, press th button. “To add, use the TELEPHONE KEYPAD bunions. 8.
Caller ID System Operation Placing Calls from the Directory 1. Press the button, 2. Press the scroll up or down (a or v) button fo find the one you want to call. 3. Press and hold down the 7-Digit button for local call, or press and hold down fhe 10-Digit button for cal call with area code, or press and hold down the 1+ button for long distance call. 4. To end your conversation, either press the button or place the HANDSET on the BASE UNIT. Deleting All Records in the Directory 1. Press the button, 2.
Caller ID System Operation Function Operation This unit contains the following special functions: A. LANGUAGE F. OUTNUMBER B. SILENT ON/OFF G. PBX ONION C. TIME SET H. PAUSE TIME D. RINGER VOLUME I WAITING E. CONTRAST To abscess, press the button at STANDBY Mode, then press the TELEPHONE KEYPAD (1~8} or the scroll up or down (a or ¥) bunions.
A. Language This telephone offers English. Spanish and French languages for your convenience. 1, Press the (BINGE button. . 2. Press the TELEPHONE KEYPAD #1 button. 3. Press the button. 4, Press the scroll up or down {a or ¥} bunion to select the type of language you desire. English is the preset language. 5. Press and hold down the button. 6. Press the button to go back to STANDBY Mode. B.
S9idpt2 pe D. Ringer Volume This unit enables you to adjust the ringer volume from HI, MED and LOW as desired. 1. Press the (DUNGEON . Press the TELEPHONE KEYPAD #4 button. 2. 3. Press the button. a . Press the scroll up or down (a ar ¥) button to adjust the ringer volume suitable for your convenience. (Hi is the preset ringer volume.) 5, Press and hold down the SAVE) button. 6. Press the button to go back to STANDBY Mode. E.
Caller ID System Operation G. PBX Mode This unit enables you to turn ON/OFF the PBX system depending on the telephone system you are using. 1, Press the button, Press the TELEPHONE KEYPAD #7 button, 2. 3. Press the button. 4, Press the scroll up or down {a or v) button, PBX MODE OFF set for direct line access. The preset PBX Mode is OFF. PBX MODE ON When connected to a switchboard system. 8. Press and hold down the SAVE) button. 6. Pres sine button to go back to STANDBY Mode.
Telephone Keypad Characters The telephone Keypad buttons (1~9) are used to enter the characters when entering names. Press the appropriate keypad bunion to get the following characters. ES CHARACTERS 1 SPACE ABC 3 DEF 4 High 5 JELLS -6 MONO 7 HDQRS 8 TUBE 9 WXYZ9 For example, if you want to enter the character "C”, press the “2” key, the first character displayed will be “A”. Press the “2° key again to display "B", and press again to display the letter *C”.
17074 Security System Your cordless telephone uses a digital coding security system to prevent unauthorized use of your telephone fine by another nearby cordless telephone. The system has its own identifying signal created by microcomputers in both the BASE UNIT and HANDSET. Security Code This telephone has an internal security code with 65,536 possible combinations.
Battery Type Use the following type and size of battery pack: Cordless Telephone Battery Pack 3.6V, 800mAh 1.8, Electronics inc. Ni-Cd Battery Pack: model BES) Ni-Cd ‘This battery pack is available through: U.S. Electronics Service Center 105 Madison Avenue New York, NY 10018 1-800-828-5208 Recharging the Battery Pack The nickel cadmium (Ni-Cd) battery pack in the HANDSET can be recharged many times using the builtin-in charger in the BASE UNIT.
8915030. m6, 3 Problem Solving Section For your assistance, we have listed below a few common problems. Phone does not work, check the following: . 1. BASE UNIT is plugged into power source. 2. HANDSET is charged. 3. TONE/PULSE switch is in the right position. 4. TELEPHONE LINE CORD is plugged into the telephone jack. Range of phone limited, check the following: 1. ANTENNA on BASE UNIT is raised, 2, BASE UNIT is centrally located in your residence. 3.
[LCE RN] Excess static, check the following: 1. Check to see that the ANTENNA is not touching another metal object Raise the ANTENNA. If after pressing the TALK button, you receive three beeps and no dial tone, check the following: 1. Reset the HANDSET by placing it on the BASE UNIT for 2 to § seconds. NOTE: if no telephones in the house are working, disconnect one peseta time fo verify that none of the phones are causing the problem.
Technical Information “This cordless telephone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect the operation of your system. Noise Electrical pulse noise is present in most homes at one time or another. This noise is most intense during electrical storms. Certain kinds of electrical equipment such as light dimmers, fluorescent bulbs, motors, and fans also generate noise pulses.
FCC Requirements Federal Communications Commission Requirements This equipment complies with Part 68 of FCC Rules, Label on the BASE UNIT of this equipment contains, warmonger other information, the FCG Registration Burner and the Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company.
Federal Communications Commission Requirements (continued) Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Interference to radio communications.
Warranty Warranty information Elisabeth Products One-Year Limited Warranty This limited warranty sets forth all Bell South Products responsibilities regarding your product. There are no other expressed or implied warranties from Bell South Products. Warranty Service Provided If you purchased the new telephone from a retail vendor, Bell South Products warrants the telephone against defects in material and workmanship for a period of one (1) year from the original date of purchase.
What to Do for Warranty Service During the first thirty (30) days, a defective product is eligible for over-the-counter exchange at the retailer from whom it was purchased. After thirty (30) days, the defective product should be returned to the authorized service center. Please allow 2-3 weeks for the return of your telephone product. The shipping address of the authorized service center is: U.8.
VOTER This page serves as a template for attachment of screws to the wall when mounting this telephone on the wall, 1. Cut out this page. 2. Use this template to determine the distance between screws when mounting this.
IMPORTANT In order to get maximum life from the HANDSET Ng on ETC ER HANDSET for 12 hours before initial use. IMPORTANT Placing your BASE UNIT near appliances PE Cay Eee ct EA microwave ovens may cause interference. [171 del ava 0g When you hear interference, press the SCAN eC UCT eee Ta IMPORTANT The AC ADAPTER must always be plugged into an electrical outlet. IMPORTANT “To obtain the best reception, be sure to raise or reposition the BASE UNIT antenna.
Make certain you receive the best performance from your telephone. Read this manual first.