2001-05-07 DotSurfer User Manual / G G Version: 1.0.
2001-05-07 TABLE OF CONTENTS kzGp UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU[ ~pukv~zGYWWWVwGw UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU\ ~pukv~zG`_VtlGwUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
2001-05-07 spu|Gw UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUZ_ ' $$ 3 ! ' ! , ! % ! # * $$ ! 4 13 ' # ! 5 &&& ! ! 5 ' 1 # & # $ G !
2001-05-07 DotSurfer Introduction GTRAN DotSurfer 1X PCMCIA Card is high-speed Wireless Modem that supports up to 153Kpbs under cdma2000 1X Network.
2001-05-07 WINDOWS 2000/XP Procedures 1. Driver Install 2. Driver Uninstall 3.
2001-05-07 1 . Dr i v er I n st a l l ①. Insert the Card. When Found New Hardware Check Wizard screen appears, choose the option as below and click Next> Next button. ②. Choose location to search for Driver file and click Next> Next> button. ③. Assign file path and click OK button.
2001-05-07 ④. From the assigned route, search for driver file. Once file is found, you’ll see a screen that says “Found Found New Hardware Wizard”. Wizard Click Next> Next> button and go to the next step. ⑤. You’ll see the screen below since we currently do not have digital name provided by Microsoft. Continue with the installation.
2001-05-07 2 . Dr i v er u n i n st a l l ①. Go to Start and choose Properties -> Control PanelPanel-> System. ②. Go to System Properties window and choose Hardware -> Device Manager tab. ③. Go to Device Manager window and choose ModemModem-> GTRAN Dotsurfer…. Dotsurfer ④. Choose GTRAN DotSurfer.. Modem and right click the mouse.
2001-05-07 WINDOWS 98/ME Procedures 1. Driver install - Windows 98 - Windows ME 2. Driver uninstall 3.
2001-05-07 1 . Dr i v er I n st a l l 1.1 Wi n d o w s 98 ①. Insert the Card. When “Add Add New Hardware Check Wizard “ screen appears, choose the option as below and click Next> Next> button. ②. Choose the option as shown below and click Next> Next> button.
2001-05-07 ③. Select the location to search for new Driver and click Next> button. ④. Once Driver file is found from the assigned location, you’ll see a screen showing the search result. Click Next> Next> button.
2001-05-07 ⑤. Once Driver installation is complete, go to Start and click SettingsSettings-> Control PanelModem. You will be able to check whether GTRAN DotSurfer 153K Panel-> Modem Wireless Modem is installed.
2001-05-07 1.2 Wi n d o w s M E ①7 Insert the CD. ②. Insert the Card. When “Add Add New Hardware Wizard “ screen appears, choose the option as below and click Next> Next> button. ③. If the install is completed regularly, then the screen appears as below. Click Finish button.
2001-05-07 2 . Dr i v er U n i n st a l l ①. Go to Start and select SettingsSetting -> Control PanelPanel-> Modem. Modem ②. From Modem Registration Information window, select GTRAN Dotsurfer 153 Wireless Modem. ③. While selected, click Remove button. 3 . Dr i v er U p d a t e ①. Follow 2. Driver uninstall procedure shown above and remove the device driver. ②.
2001-05-07 WINDOWS 2000/XP and WINDOWS 98/ME Procedures 1. GT Dialer II Installation 6/ Initial Install 6/ Update Install 6/ Uninstall 2. GT Dialer II Program User Manual 6/ Main Screen and Icon Description 6/ Network Connect and Disconnect 6/ Internet Connection 6/ SMS Send and Receive 6/ Address Book Management 6/ Theme and Other Configuration 6/ Call History 3.
2001-05-07 1 . G T Di a l er I I p r o g r a m 1.1 I n i ti al i n s tal l ③. Run Setup.exe. Setup.exe Install Shield Wizard will start in order to assist the installation process. ④. Assign path to install the program and click Next> button. ⑤. From the screen asking for the installation type, choose the type you want and click Next> Next> button.
2001-05-07 1 . 1 . 2 M i ni m um I nst a l l a t i o n Select Minimum Installation and click Next> button from the Installation Type Select screen. Install Shield Wizard will automatically complete the installation. Under Minimum Installation, GT Dialer II, GT Updater, Basic Theme file will be installed. 1 . 1 . 3 C ust o m I nst a l l a t i o n ①.
2001-05-07 1.2 U p d ate I n s tal l ①. Connect System from the Network. ②. Go to Start and run ProgramUpdator. Program-> GTRANGTRAN-> GT Dialer IIII-> GT Updator Connect Gtran server for update GT Dialer, then choose item. ③. Select the item to be updated and click Update. Update This updates new features of GT Dialer II and Device Driver Update in the user’s system. ④.
2001-05-07 ③. When Remove Confirmation screen appears, start the removal process by clicking OK. OK 1 . 3 . 2 R e m o v i ng fr o m t h e C o nt r o l P a ne l ①. Click Start -> Settings -> Control Panel Panel -> Add/Remove Programs. Programs ②. Among the programs currently installed, select GT Dialer II and delete by clicking Add/Remove.
2001-05-07 2 . G T Di a l er I I U ser M a n u a l To run GT Dialer II, II go to Start and select ProgramProgram-> GTRANGTRAN-> GT Dialer II or doubleclick Shortcut to GT Dialer II icon from wall paper. 2.1 Mai n Sc re e n an d I c o n s Main screen shown below will appear once GT Dialer II starts running.
2001-05-07 The feature and meaning of each icon on the main screen is shown below. pG pG kG kG pG pG GPS Time / kG kG No new message Connect to www. gtran.
2001-05-07 2.2 N e tw o rk C o n n e c t an d D i s c o n n e c t 2 . 2 . 1 C o nnec t ing ①. On the main menu, click Connect/Disconnect, Connect/Disconnect and you will be connected to the network. ②. As Connect/Disconnect runs, if GT Dialer II does not recognize the card, an error message as shown below will appear.
2001-05-07 2.4 Se n d i n g an d R e ad i n g SMS 2 . 4 . 1 Send ing SM S ①. From the main screen, click SMS Write icon. Send SMS screen will appear. ②. Input receiver’s phone number and text. ③. Once finished inputting, click SEND button and the message will be sent. 2 . 4 . 2 Rea d ing SM S ①. From the main screen, click SMS Read icon. Receive SMS screen will appear.
2001-05-07 new message read message. ②. To continue to read other messages, select them by clicking or . ③. To delete the message, click DELETE. DELETE 2.5 A d d re s s B o o k Man ag e m e n t On the main screen, click Address Book icon and Address Book screen will appear as shown below. 2 . 5 . 1 Re a d a nd S e a r c h Ad d r e ss Bo o k ①.
2001-05-07 ④. To search by E-mail, ⑤. To search by Index, 2 . 5 . 2 Ad d i ng t o Ad d r e ss Bo o k ①. From Address Book screen, click NEW. NEW ②. Input Name, Home, Office, Mobile, and E-mail. Click SAVE and inputted data will be stored. 2 . 5 . 3 E d i t Ad d r e ss Bo o k ①. Select the Index to edit and modify appropriate category. ②. When editing is finished, click SAVE.
2001-05-07 ②. To change the Theme, go to Skin File select the desired file. ③. To set up a website that appears from clicking Browser icon on the main screen, go to Default Home Page to set up. ④. To set up SMS sound when new message arrives, put a check mark as shown and select the sound. To remove the SMS received sound, remove the check mark. ⑤.
2001-05-07 2.7 A c c e s s D e tai l e d U s ag e I n f o rm ati o n ①. Click which is at the bottom of the main screen and you will see a screen shown below. ②.
2001-05-07 3. GT I n d ic a t o r GT Indicator Program is a supplemental program for GT Dialer Dialer. When web browsing by using IE, the indicator shows information on DotSurfer on top of the screen. Basic user setting should be IE 5.01 or higher and GT Dialer should be running properly. 3.
2001-05-07 3.4 G T I n d i c ato r I c o n s RSSI Status Indicator Icon No Service Signal Strength (RSSI).
2001-05-07 Win CE Procedures 1. Driver Install for COMPAQ iPAQ 2.
2001-05-07 1 . Dr i v er I n st a l l f o r C O M P A Q i P A Q ①. Run ‘MicroSoft Active Sync’ then synchronize PC and iPAQ PDA. ②. Open PC Explorer and run setup.exe which is in Window CE folder under DotSurfer1X Card Install folder. ③. From the Welcome window, click Next > button. / ④. On the License Agreement screen, click Yes. Yes ⑤.
2001-05-07 ⑥. When installation is complete, screen will appear as shown below. As this screen appears, installation automatically will run in iPAQ PDA.
2001-05-07 ⑦. Insert DotSurfer 1x card after separated iPAQ PDA from the cradle to stop synchronization between PC and iPAQ. ⑧. Insert the card. Using iPAQ’s stylus, press the hole on the right bottom of the PDA to SoftSoft-Reset.
2001-05-07 2. C o n n ec t in g t o I n t er n et ①. Go to Start -> Programs -> Connections ->DotSurfer 1X. ②. When you see the screen below, input user ID, password, etc. and click Connect. Connect ③. Once connected, go to Start –> Internet Explorer and start surfing the web.
2001-05-07 3 . G T Di a l er U ser M a n u a l ①. Go to Start –> > Programs -> GT Dialer Dialer. ②. Screen showing DotSurfer 1X status will appear. 8 RSSI: Current Signal Strength 8 Status: Current Service Status 8 SMS: Alerts when SMS arrives 8 Protocol: Protocol-Type currently connected 8 TX, RX: Transferred/Received Byte Size. 3.
2001-05-07 ③. After in-put the receiver’s number and text message, Click “Send Send” Send button. In the sender’s number, already included my number. ④. To read SMS, select ‘list’. Double click the line of list’s header, when can’t see the whole message.
2001-05-07 3.2 D e l e te SMS an d e tc . ①. To delete SMS, select the message. Then run Stylus’s tap-and-hold, display the pop-up menu. Select the pop-up menu’s “Delete Delete” Delete ②. To reply the receive message, select it and run Stylus’s tap-and-hold. Select pop-up menu’s “Reply”. ③.
2001-05-07 LINUX Procedures 1. Summary 2. Driver Install 6/ Install in Kernel Source 6/ Add to Kernel Module 6/ Replace Kernel Module 3.
2001-05-07 1. Su m m a ry This section describes DotSurfer PCMCIA card user manual for Linux based laptops. Need the following in order to use DotSurfer Card: - Linux Kernel 2.2 or higher - Basic Module and setup needed to use PCMCIA Card - setserial 2.
2001-05-07 2 . I n st a l l There are three methods of installing DotSurfer 1X Device Driver. 8 Install in Kernel Source 8 Add to Kernel Module 8 Replace Kernel Module Before installing, login under the root account and decompress dotsurf_drv_1.0.tar.gz file from an appropriate location. 2.1. I n s t a l l i n Ke r n e l S o u r c e ①.
2001-05-07 2.3. R e p l a c e Ke r n e l M o d u l e This method applies only to the case where serial Device Driver is installed as a dynamic Module. However, installation is possible in other cases as well. Generally, serial Device Driver is included in Kernel as static and most Linux packages will have kernel that has static serial device driver. You can change the ‘serial.
2001-05-07 3 . U si n g C o m m u n i c a t i o n 3.1 V e ri f y Se tti n g If the driver is installed, you can have wireless network connection using DotSurfer Card. While the card is inserted, DotSurfer card should have a port such as /dev/ttyS1 allotted and in such a case, there should be a /dev/modem link under the applicable port. ①.
2001-05-07 4 . Ho w t o U se Do t S u r f er M essen g er P r o g r a m DotSurfer Messenger program is an X application that allows usage of DotSurfer’s various supplemental functions. The system must have GTK+ Library installed. Most of the Package have GTK+ Library.
Warning This equipment complies with part 15 of the FCC rules. Any changes or modifications not expressly approved by the GTRAN WIRELESS, INC. could void the user’s authority to operate the equipment.
