User's Manual

You can have as many transmitters as you want for family and guests to open your gate.

The DIP switches in all the transmitters for a particular gate opener must be set the same.

ACCESS SYSTEMS

Cloning/Learning a DIP switch code:

1. Press and hold button 1 and button 3 at the

same time for about 5 seconds.

2. The LED will turn on, then release the buttons.

3. Press and release the button that you want to learn

a DIP switch transmitter to just ONCE.

4. Hold the DIP switch transmitter with the front/top

facing the clip side of the Smart Transmitter.

5. Press the button on the DIP switch transmitter

6. The LED on the Smart Transmitter will blink twice

when it has successfully learned the code.

The button you programmed will now transmit the

DIP switch code as indicated by the LED being solid

on when the button is pressed.

The three button transmitter is used for the remote control of two GTO gate openers or one GTO gate

opener and two garage door openers. A GTO Universal Receiver (RB709U-NB) is required for use with

non-GTO garage door openers.

Instructions for CS3BT

Three Button Entry Transmitter

06-17-2015

Creating a DIP switch code:

1. Press and hold button 1 and button 3 at the

same time for about 5 seconds.

2. The LED will turn on, then release the buttons.

3. Quickly press 2 times the button you wish to

create a DIP switch code for.

4. The LED will then blink twice showing

successful creation of a DIP switch code.

The button you programmed will now transmit the

DIP switch code as indicated by the LED being

solid on when the button is pressed.

1 2

PAGE 1
Instructions for CS3BT Three Button Entry Transmitter ACCESS SYSTEMS The three button transmitter is used for the remote control of two GTO gate openers or one GTO gate opener and two garage door openers. A GTO Universal Receiver (RB709U-NB) is required for use with non-GTO garage door openers. You can have as many transmitters as you want for family and guests to open your gate. The DIP switches in all the transmitters for a particular gate opener must be set the same.
PAGE 2
Instructions for CS3BT Three Button Entry Transmitter ACCESS SYSTEMS The three button transmitter is used for the remote control of two GTO gate openers or one GTO gate opener and two garage door openers. A GTO Universal Receiver (RB709U-NB) is required for use with non-GTO garage door openers. You can have as many transmitters as you want for family and guests to open your gate. The DIP switches in all the transmitters for a particular gate opener must be set the same. Deleting a DIP switch code: 1.