Complete LED Lighting Solutions MRS o 1 @f GT-Lit [Pror® Installation: GT-BU-BF | LED Blue Flame E26 Bulb Watts: 4.5W Equivalent to 40W Incandescent LED Lifespan: 25,000 Hours Operating Voltage: 120V AC CRI: 80 Color: Blue Flame Base: E26 / Standard Edison Base Damp Rated Operating Temperature: -4°F to 113°F (20°C 10 45°C) {5} This bulb is approved for use In enclosed fixture This bull cannot be used on H.1.D. fixtures or any other ballasted fixtures.
Installation: 6T-BU-BFM | LED Blue Flame E26 Bulb A ADDITIONAL WARNINGS: A Do not dismantle this light. There are NO replaceable LED or serviceable parts. This product needs to be grounded properly in a manner consistent with local electrical codes and the current NEC. If the installer does not understand basic wiring/how to properly ground the fixture, please consult a qualified electrician. Do not install this light inside of undersized enclosures.
Installation: 6T-BU-BFM | LED Blue Flame E26 Bulb x Gravity Induced Flames i %ié INSTALLATION INSTRUCTIONS: 1. Before installing the bulb, shut off power supply at the circuit breaker panel to avoid electrical shock. It is recommended that surge/lightning protection be installed. This bulb is not compatible with any ballasted fixture. 2. Remove old bulb. 3. Screw in new high lumen utility bulb. 4. Restore power. 5. Tum on light switch. Bulb will illuminate immediately.
Installation: GT-BU-BF | LED Blue Flame E26 Bulb TROUBLESHOOTING GUIDE: Problem Probable Cause Solution Fixture does Bad connection. = Check wiring connections. not tum on. Faulty switch. Test switch or replace it. Power Is off. Verify power supply s on. Circuit breaker trips | Discontinue use | Call customer service at 1-800-865-6799 or fuse blows when | immediately. Call an electrician, light is turned on. CLEANING INSTRUCTIONS: 1. Tum power OFF. 2. Use a soft cloth and a mild, non-abrasive glass cleaner.