User Instructions

Feeder Meter

Sensors

TIPS:

• Feeder Meter has a dust cover that needs to be regularly cleaned for device to produce

accurate measurements. We recommend cleaning dust cover with a damp cloth once every six

months, or when you rell your feeder, whichever is sooner.

• The Feeder Meter Sensors must face the center or the bottom of the feeder for accurate

measurement.

• Feeder Meter does not work inside a metal feeder. If you have a metal feeder, you must use

the Feeder Meter with Antenna, and the antenna must be placed on the outside of the feeder.

• Feeder unit needs to be level, otherwise Feeder Meter will produce inaccurate results.

Initial Setup

Step 1: Download “American Hunter Feeder Meter” app from Google Play Store or iOS App

Store.

Step 2: Place 2 matching Alkaline AA batteries into unit.

Step 3: Use adhesive pad to place Feeder Meter in the center of the roof in your feeder.

Step 4: Follow in-app instructions to add and congure your Feeder Meter.

Double-Sided

Adhesive Foam

Pivot Mount

Dust Covers

PAGE 1
Feeder Meter Initial Setup Step 1: Download “American Hunter Feeder Meter” app from Google Play Store or iOS App Store. Step 2: Place 2 matching Alkaline AA batteries into unit. Step 3: Use adhesive pad to place Feeder Meter in the center of the roof in your feeder. Step 4: Follow in-app instructions to add and configure your Feeder Meter.
PAGE 2
FCC Compliance Feeder Meter AH - FMTR Input: 3V / Output: 5V GSM, LLC AH-FMTR LOGO BQB: Bluetooth FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.