User Guide 2G Feature phone Model: RAYO R2 Thank you for choosing this Spreadtrum Platform phone. This device will offer you unprecedented surprise for it can support GSM cards and multiple cards standby. Meanwhile, this phone is equipped with a 3 megapixel HD digital camera, a MP3 Mobile Music and a MP4 video player. Enjoy yourself ! Safety Please go through, and comply with, the following considerations before using this phone.
Contents Introduction ........................................................................................................................................................1 Insert SIM card and battery ......................................................................................................................................1 Insert memory card ..................................................................................................................................................
Application ..........................................................................................................................................................5 Alarm ........................................................................................................................................................................5 Calendar ...............................................................................................................................................................
No network displayed ............................................................................................................................................ 13 Memory card can’t be found in mobile phone ...................................................................................................... 13 Insufficient space ...................................................................................................................................................
Introduction Insert SIM card and battery Long press power supply key for 3s to turn it off; Remove the battery. Insert SIM1 (per the mark “SIM1” on the card slot. The contactor shall face down (note the notch on the SIM card is in line with the slot). Push the SIM card inwards from the card slot until it absolutely fits the slot. Insert SIM2 in the same manner. Insert the battery with metallic contact aligned to the phone battery contact and replace the back cover. Note: 1.
3. Please use charger to charge this device. USB wire charging shall be avoided if possible. 4. In order to help the new battery perform best, it shall complete 2~3 charge-discharge cycles. Its initial chargings shall last for more than 10h unceasingly for each Power on and off Power on Long press power supply key for 3s to turn on this phone Power off Long press power supply key for 3s to turn off this phone.
Slide the main menu to display all the applications. Different main menus may have different slide mode. Press Return button to return back to the idle page. Call Dialpad Under idle situation, press “Dialpad” button to enter into the dialpad interface, and press keyboard to dial; Press “Call”, escape the SIM card select screen. Select SIM1 to dial with SIM1; select SIM2 to dial with SIM2 Press “IP” button to carry out IP dial; Making an overseas call.
Call logs Show the phone numbers missed recently Roll to any number and press the dial button reply the call, and can press [Menu] to select other operations. Contacts When this device standby, select [Contacts] and open the namelist. The contacts are listed in the order of unnamed, special symbol, digit and English letter respectively (for Chinese names, the English letter corresponding to their pinyin prevails). Messages Message service is actually a network service.
The phone is able to play music files saved in phone and the downloaded music and support background play of MP3 file. Instruction: MP3 supports MPEG 1 layer 3 audio; supports MPEG 2 layer 3 low sampling rate extension; MPEG 2.5 layer 3 (unofficial). Camera To take a picture and video, you can clip the icon through the self-contained camera function. Click the camera icon from the main screen, and switch to the framing menu of the camera. Press return button to exit the camera procedure.
Weight: You can choose “kg—ounce” or “kg—pound” for unit conversion. Length: You can choose “km—mile”, “meter—yard”, “meter—feet” or “cm—feet” for unit conversion. Bluetooth This function allows you connect other devices and transfer some files as you like. Settings Phone Settings The items include: Time and Date: You can customize time and date as well as their formats Language: You can customize the display language and writing language.
Wallpaper Settings: Supported wallpapers: Static wallpapers, dynamic wallpapers, more pictures. Screen Savers Settings: set the screen savers. Backlight: adjust the screen backlight. Button Backlight: adjust the backlight time. Font Settings: set the font. Security settings Including: PIN code: Start and close of PIN code and the modification of PIN. Warning Please use this function cautiously. If you forget the PUK code, please get it from the service provider.
Divert when phone off or no coverage: After the function is activated, if you are unavailable because there is no coverage or the phone is powered off, you can divert the incoming calls to Voicemail or the pre-determined phone numbers. Cancel all diverts: Cancel all the call diverts. Note: You have to turn off “Flight mode” before setting “Call divert”. Call Waiting: Activate: After the function is activated, the network will inform you of the new incoming calls when you are on a call.
U Disk Function U disk function allows you connect your phone with PC and you can use your PC to read files in your phone and transfer them too. When the mobile phone is in the status U disk is being used, you can see some default files. Once deleted, the default files in U disk will be lost forever. After U disk is used, remove U disk from computer first and receive a sign from system before taking U disk safely, or the data of U dsik may be lost or file system of U disk is damaged.
Maintenance of Mobile Phone Mobile phone is a high-precision electronic product, so please take good care of it. The following suggestions can help you preserve it and lengthen its useful life: Put mobile phone and its accessories to the place where children are out of reach. Keep mobile phone dry. Rain, moisture or water may erode circuit board. If mobile phone falls into water carelessly, take battery out in time and send it to local authorized service center immediately.
Troubleshooting for Simple Troubles In the course of using mobile phone, if abnormal condition comes out, please refer to following instruction to rule out malfunctions. If it can’t work, please contact designated maintenance center. Mobile phone can’t be turned on Possible causes of trouble Troubleshooting The time pressing end key is too short. Please keep pressing hanging mobile phone for more than three seconds. Electricity of battery is exhausted. Please charge the battery.
Poor quality of conversation Possible causes of trouble Current signal strength changes sharply. You are in the location where signal is badly received Troubleshooting Maybe you are in a status of moving at high speed (in a train or motor, est.), judge by signal strength indicator and choose a place with strong signal strength to communicate in order to assure conversation quality.
No ringtone for incoming call Possible causes of trouble Troubleshooting The alerting signal of incoming call is set in mute mode. Please reset alerting signal of incoming call in ringtone The volume of ringtone is set too low. Please increase volume. Call forwarding is set. Please cancel Call divert Battery can’t be charged Possible causes of trouble Troubleshooting The battery is exhausted and placed for too long. Please charge battery in time after mobile phone signalizes insufficient power.
Insufficient space Possible causes of trouble Troubleshooting MMS or SMS have occupied too much storing space. Please Clear unnecessary MMS or SMS to free up space. History recording saved in browser has occupied too much storing space. Please select Communication→Browser→WAP settings→Browser settings→Clear cache]to free up space.
Safety Information Usage Environment To assure you use mobile phone reasonably and avoid its affect on you and environment, please keep in mind relevant regulations and provisions which shall be complied with at any place when you use mobile phone. In the places which may give rise to bomb such as gas station, fuel reservoir, chemical factory, or bombing work, please turn off your mobile phone and abide by all safety marks and instruction there.
The same as other mobile phones, this kind of mobile phone uses radio signal, wireless and ground communication network and personal setting function, it can’t guarantee it can get linked successfully under any situations. Please don’t reply on only mobile phone for sending important communication (such as medical emergency) Dial emergerncy call If your mobile phone is power off, please turn it on and check if network signal is strong enough.
your network operator or SIM card retailer. If you input wrong PUK code for ten times successively, SIM card can’t be used any more. Then please apply to your network operator for a new card. Do not change PUK code. PUK2 Code Unlock PIN2 code. Usually PUK2 code and SIM card are provided together, PUK2 code can alter locked PIN2code. If PUK2 number is imputed wrong for ten times successively, some functions can’t be used any more. Then please apply to your network operator for a new card.
Please use standard battery and charger provided by Amoi Company, or it may give rise to bomb. When you don’t need charger, please cut off electricity source. Do not keep battery linked with charger for over one week, overcharge will shorten useful life of battery. Please do not place battery by mistaking its cathode and anode. Please do not place battery at place where it is too high or too low, or it will decrease battery’s capacity and life.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.