FCC ID: 2AUBQ-GS-WFC HD IP Camera Mobile Phone Operating Instructions (Android / ISO scan code adaptive) Computer client download address:http://www.p6scloud.com Ⅰ Download and install P6slite mobile APP According to the type of mobile phone, download and install “P6slite” from IOS app store or Android app store, follow the prompts to complete registration and login “P6slite”, support third party login such as WeChat, QQ. Ⅱ Add camera 2.
real email address to retrieve password later), or you can log in by WeChat or QQ. 2.2 Add a new device process To add a new camera, you need to restore the camera to the initial state. Press and hold the reset button for about 5 seconds to return to the initialization state. Wait for the camera to power on (30 seconds after power-on) to start the set-up network. 2.2.
2.2.1.4 Jump to the WIFI setting page (the device is connecting to WIFI), according to the list of wireless networks displayed on the current page select the WIFI network to connect . 2.2.1.5 Enter the WIFI password, click Confirm,you will hear "WIFI is connecting, please wait ....network connection successful" 2.2.1.6 "Set device WIFI information successful" appears on the APP screen, click confirm,you will see the device in the device list. 2.2.1.7 You can watch the video of the device.
2.2.2 Connection method of Apple mobile phone: Connect WIFI through device AP hotspot: 2.2.2.1 Open the mobile phone WIFI list, find the AP hotspot device beginning of ZWAP_NG****-73****-CE***, connect the mobile phone to the hotspot.
2.2.2.2 Enter the device AP hotspot password: 01234567 2.2.2.3 Open the APP "P6slite", Click the local mode in the lower left corner of the APP login page. You will see the connected device in the device list. 2.2.2.4 Click the device's setting button to jump to the setting page (the device is about to connect to WIFI) 2.2.2.5 Click “More”- select WIFI setting. 2.2.2.6 According to the list of wireless networks on the current page, select the WIFI network to be connected. 2.2.2.
‐6‐
Ⅲ、The button function introduction 3.1 Not subscribed: One-click to open the push (image send to mailbox + mobile phone), it shows not subscribed when the push function is off , you need to set the corresponding option in the alarm setting when you need to open this function (as the images show below); Subscribed: One-click to close the push (do not send image to mailbox + mobile phone), it shows subscribed when the push function is on.
3.
other functions, after playback, you can directly click “ live ”to the preview page. 3.3 Remote image: You can enter the push image page with one click, and select the time to preview the corresponding push image. 3.4 Setting: One-click to enter the device parameter setting menu. Ⅳ、Setting menu 4.1 Set the camera device name: customize the naming according to the user's habits and the location of the camera, for example “living room”, “gate”, “parking lot”, “checkout counter”, “ store door”, etc.
4.2 Username: default is admin 4.3 Password: Support letters+ numbers combination (default is empty / maximum support 16 characters) 4.4 DID: DID number and QR code of the current device (for face-to-face sharing, etc.) 4.5 Status: Device online or offline status display 4.6 Password setting: set or change the device password (the default password is empty) 4.7 Video setting: main stream/sub-stream ,stream type, video encoding, resolution, frame rate, rate control and picture quality setting 4.
4.15 Record setting: HD/SD, timer/alarm/motion/human detection/disable/ record time setting 4.16 Timing capture: save picture to SD card, SD card capture interval, save picture to FTP, FTP capture interval setting, etc. 4.17 OSD setting: Image OSD, Channel Name/Display Time - On and Off setting 4.18 WIFI setting: display WIFI list and network status (support switch to any WIFI network at the current environment) 4.
5.1 Q: When adding a device, the password is incorrect or the password set after the last connection is forgotten. A: The device may have a password or has been changed, or reset the password. Please press the “Reset” button of the device (using the U-shaped pin) for 5 seconds. The device voice prompts “Reset successful”, indicating that the device password is reset successfully, follow the steps above to re-add the device. 5.
A: Please check whether the distance between the device and the router is too far, whether the mobile phone correspond to the hotspot of the current device, whether the router have the DHCP function enabled, whether the connected WIFI is 5G (the device does not support 5G, only supports 2.4G), and whether the router opens the anti-mite network function,so that filtered device. Ⅵ Get more information This quick operation guide will help you to use your wifi camera quickly.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.