%OX UD\ 3OD\HU *%3 ' (1
CONTENTS ---------------------------------------------------------------------------------------------------------------------------------3 SET-UP AND SAFETY 4 4 4 GBP 7000 3D Packing contents Special features 6 6 7 OVERVIEW The Blu-ray player controls The remote control 9 9 CONNECTION AND PREPARATION Connecting the LED/LCD TV using an HDMI cable Connecting the LED/LCD TV using RCA cables Connecting a digital audio system with a coaxial cable Connecting an MP3 player or a USB memory stick Connecting
SET-UP AND SAFETY ----------------------------------------------------------------------------------------------Please note the following instructions when setting up the system: 7 7 7 7 7 7 7 7 7 7 7 7 The device is designed for the playback of video and audio signals from compact discs, USB and similar data devices. Any other use is expressly prohibited. If you want to set up the device on wall shelves or in cupboards, please ensure that it is adequately ventilated.
GBP 7000 3D------------------------------------------------------------------------------------------------------------------------Packing contents 7 Blu-ray disc player Remote control 2 batteries (Micro, R03/UM 4/AAA, 2 x 1,5 V) User manual HDMI cable 7 7 GBP 7000 3D BD Player 7 HDMI cable User manual Remote Control Special features Grundig Blu-ray Disc player provides high definition video playback at up to 1080 p resolution for an amazing viewing experience.
GBP 7000 3D------------------------------------------------------------------------------------------------------------------------Disc type 3D Blu-ray Disc Blu-ray Disc DVD-video Disc (DVD-ROM) Logo Notes: 7 Writable DVD discs (DVD-RW, DVD-R) must be finalized; only VR-mode is allowed. Playback may not work for some types of discs, or when specific operations, such as angle change and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box.
OVERVIEW ---------------------------------------------------------------------------------------------------------------------------------The Blu-ray player controls The front of the device e! . 9 GBP 7000 3D Disc compartment Disc compartment • Power indicator IR sensor Compartment for BDs/ CDs. Display Power indicator USB Switches the device on from standby mode and off again. 9 Infra-red sensor for remote control signals. Plays next title, chapter, track or file if exists.
OVERVIEW ---------------------------------------------------------------------------------------------------------------------------------The remote control 9 Switches the device on from standby mode and off again. Opens or closes the disc compartment. 1-0 Number buttons for various data. SEARCH Press repeatedly to switch between search modes: title, chapter and time. Then use number buttons and »ENTER« button to select the point you want to play.
OVERVIEW ---------------------------------------------------------------------------------------------------------------------------------!8 Frame-by-frame playback. DISC MENU Immediately stops playback and brings up the main or 'top' menu of the BD or DVD disc. (Not available on all discs). In the main menu, you can typically choose subtitle language, audio track, or different scene etc. POPUP MENU On BD discs: to bring up the TITLE MENU main movie menu (not available on all discs).
CONNECTION AND PREPARATION --------------------------------------Notes: 7 Do not connect any other equipment while the device is switched on. Switch off the other equipment as well before connecting it. 7 Connecting the LED/LCD TV using RCA cables Television BD Player Only plug the device into the mains socket after you have connected the external devices.
CONNECTION AND PREPARATION --------------------------------------Connecting an MP3 player or a USB memory stick Connecting to the internet with ethernet cable Splitter Modem Router GBP 7000 3D Telephone socket BD Player GBP 6000 2D BLU-RAY DISC PLAY AC:110-240 V~ 50/60 Hz POWER:17 W GLR 5800 Note: 7 The device must be switched off while the USB connection is being made. If it is not switched off, data can be lost. 1 Switch off the device by pressing »9«.
CONNECTION AND PREPARATION --------------------------------------Connecting to the mains supply Notes: 7 Check that the mains voltage on the type plate (on the back of the device) corresponds to your local mains supply. If this is not the case, contact your specialist dealer. 7 Putting batteries in the remote control Before connecting the AC power cord to the wall socket, ensure that all other connections have been made.
INITIAL SETUP ---------------------------------------------------------------------------------------------------------------------Switching on the Blu-ray player If you connect the device to the mains, it switches to standby. 1 Plug the power cord into the wall socket. – The power indicator turns on. 2 Press »9«. – The power indicator turns off. – Display: »HELLO«. Menu navigation When you switch on the device, the main menu of the device automatically appears on the screen.
INITIAL SETUP ---------------------------------------------------------------------------------------------------------------------First installation by using the functions in the main menu 6\VWHP 1HWZRUN %' /LYH Selecting the language of the screen menu 6HWWLQJV $XGLR 1 Press »SETUP« to open the main menu. 2 In the main menu select »Settings« by using »A« or »S« and press »ENTER« to confirm. 3 Select »Language« by using »A« or »S« and press »ENTER« to confirm.
INITIAL SETUP -------------------------------------------------------------------------------------------------------------------- Note: 7 The output resolution is based on the type of LED/LCD-TV connected to the device, as described in the table below: LED/LCD-TV TYPE If your TV is a standard-definition PAL TV (SD TV) If your TV is an enhanced-definition TV (EDTV) If your TV is a high-definition TV (HDTV) capable of 720p only If your TV is a high-definition TV (HDTV) capable of 1080i only If your TV is H
INITIAL SETUP ---------------------------------------------------------------------------------------------------------------------Network settings by using wired connection The device must be connected to a wired router with an ethernet cable. Please see chapter "CONNECTION AND PREPARATION". 1 Press »SETUP« to open the main menu. 2 In the main menu select »Settings« by using »A« or »S« and press »ENTER« to confirm. 3 Select »Network« by using »A« or »S« and press »ENTER« to confirm.
INITIAL SETUP ---------------------------------------------------------------------------------------------------------------------10 Select »Secondary DNS« by using »A« or »S« and press »ENTER«. Enter the Secondary DNS by using the number buttons. Select »Ok« by using »S« and press »ENTER« to confirm, or select »Cancel« by using »s« and press »ENTER« to cancel the setting.
INITIAL SETUP ---------------------------------------------------------------------------------------------------------------------– Display: ”» « Connection to (WLAN network name), Verifying Internet Connection…” appears. – Display: » «, if the connection is successful. 8 Press »SETUP« to return to the main menu. Note: 7 For the »IP Settings« and »Network test« settings, see “Network settings by using wired connection” section.
BD/DVD PLAYBACK -----------------------------------------------------------------------------------------------This item incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.
BD/DVD PLAYBACK -----------------------------------------------------------------------------------------------Playback 1 Select »Play« if this option is available by using the cursor buttons and press »ENTER«; or press » « to start playback. – The playback starts. Note: 7 If the message »Prohibited« appears on the television screen, the selected function is not possible with this disc.
BD/DVD PLAYBACK -----------------------------------------------------------------------------------------------Selecting previous and next chapters Repeating a chapter or a track 1 During playback, press » « to play the previous chapter or press » « to play the next chapter. – When you release the button, the device skips the current chapter and playback starts from the selected chapter. 1 During playback, press »REPEAT« repeatedly to select a repeat mode: »Repeat Title«, »Repeat Chapter«, »Repeat Off«.
BD/ DVD PLAYBACK ---------------------------------------------------------------------------------------------3 In the selected Subtitle menu, select the options that you want by using the cursor buttons and press »ENTER« to confirm. – Display: for example » 01/02 DEU«. 1 During playback, press »POPUP MENU/ TITLE MENU« to open pop-up or title menu. 4 To switch of the subtitles, select »Subtitle Off« at step 3 by using the cursor buttons and press »ENTER« to confirm.
BD LIVE --------------------------------------------------------------------------------------------------------------------------------------------Some Blu-ray discs contain additional features that are made available to players that are connected to the internet, and have additional memory added. These additional features may include things like: – the ability to download new movie trailers, – additional "commentary" by actors and directors, – multiperson game play and chat.
BD LIVE --------------------------------------------------------------------------------------------------------------------------------------------Using BD-Live BD-Live notes 1 Press » « to open the disc compartment. 7 2 Insert the Blu-ray Disc in the compartment with its label facing upwards. 3 Press » « to close the disc compartment. 4 Press » 7 « to start playback. 5 During playback, press »POPUP MENU/ TITLE MENU« to open the pop-up or title menu.
PLAYING AUDIO/VIDEO FILES -------------------------------------------------------Playing the contents of a data device or a USB memory stick Preparation 1 Switch off the Blu-ray player with »8«. 2 Connect a data device to the » « socket using a standard USB cable; or insert the USB plug of the USB memory stick in the » « socket on the device. 3 Switch on the LED/LCD-TV, select the input setting on the TV that matches the connection method you used to connect the Blu-ray player.
PLAYING AUDIO/VIDEO FILES -------------------------------------------------------Playing picture CDs Displaying a picture It is possible to display digital picture files or music files that have been burned onto a data disc, DVD+/-R, DVD+/-R/(W) or a Blu-ray Disc. 1 Chose the required picture from the summary by using »A«, »S«, »a« or »s« and press »ENTER« to display. Preparation 2 Press »7« to stop playback. 1 Press » « to open the disc compartment. – Display: »OPEN«.
PLAYING AUDIO/VIDEO FILES -------------------------------------------------------Playing audio CDs Playback Preparation 1 Chose the required folder from the summary by using »A« or »S«, »a« and press »ENTER« to confirm. 1 Press » « to open the disc compartment. – Display: »OPEN«. 2 Insert the disc with audio files into the disc compartment. 2 Press » « to start playback. – The selected folder starts playing. 3 Press » « to close the disc compartment. – Display: »CLOSE«.
NetFusion MODE----------------------------------------------------------------------------------------------------------About NetFusion 7 7 7 7 7 The device supports NetFusion. This allows you to combine media streaming with controlling a connected media receiver while streaming content to it from another PC on a network. You can easily access the Video, music and image files on the server through the NetFusion menu of your player.
NetFusion MODE----------------------------------------------------------------------------------------------------------Preparation Using NetFusion function 1 Switch on the Blu-ray player with »8«. 1 Select »Videos«, »Music« or »Pictures« by using »A« or »S« and press »ENTER« to confirm. 2 Press »SETUP« on the remote control to open the main menu. 3 In the main menu select »NetFusion« by using »A« or »S« and press »ENTER« to confirm. – Display: » Discovering«.
SPECIAL SETTINGS ----------------------------------------------------------------------------------------------------Audio settings 1 Press »SETUP« on the remote control to open the main menu. 2 In the main menu select »Settings« by using »A« or »S« and press »ENTER« to confirm. 3 Select »Audio« by using »A« or »S« and press »ENTER« to confirm. – The audio menu opens.
SPECIAL SETTINGS ----------------------------------------------------------------------------------------------------Language settings 1 Press »SETUP« on the remote control to open the main menu. 2 In the main menu select »Settings« by using »A« or »S« and press »ENTER« to confirm. 3 Select »Language« by using »A« or »S« and press »ENTER« to confirm. – The language menu opens.
SPECIAL SETTINGS ----------------------------------------------------------------------------------------------------Parental control 1 Press »SETUP« on the remote control to open the main menu. 2 In the main menu select »Settings« by using »A« or »S« and press »ENTER« to confirm. 3 Select »Parental« by using »A« or »S« and press »ENTER« to confirm. – The Parental Password menu opens.
SPECIAL SETTINGS ----------------------------------------------------------------------------------------------------System settings NetFusion 1 Press »SETUP« on the remote control to open the main menu. 2 In the main menu select »Settings« by using »A« or »S« and press »ENTER« to confirm. 3 Select »System« by using »A« or »S« and press »ENTER« to confirm. – The System menu opens.
INFORMATION-----------------------------------------------------------------------------------------------------------------Licence conditions Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending.
INFORMATION-----------------------------------------------------------------------------------------------------------------Technical data System This device is noise-suppressed according to the applicable EU directives. This product fulfils the European directives 1999/5/EC and 2009/125/EC. Power supply To obtain a copy of the Declaration of Conformity (Doc), please submit your request by using the contact information at www.grundig.com/download/doc. The type plate is located on the back of the device.
INFORMATION-----------------------------------------------------------------------------------------------------------------Troubleshooting Not every picture or sound problem is caused by a defect in your device. Cables that have accidentally been disconnected, damaged discs and flat batteries for the remote control will impair functioning. If the following measures do not resolve the problem satisfactorily, please contact your specialist dealer.
INFORMATION-----------------------------------------------------------------------------------------------------------------Auto open while reading the disc. Audio and video momentarily pause while reading disc. The player is on with start logo and menu but has no image from the disc. The disc is dirty or any scratched. The format of the disc is not supported. Try to reset the device. To do so, press "8", wait for 5 seconds and then press this button again. The disc is dirty or scratched.
INFORMATION-----------------------------------------------------------------------------------------------------------------TV screen and video Make sure that the LED/LCD-TV is connected to the VIDEO OUT soThe images from this player cket or HDMI OUT socket on this device. do not appear on the tele- Make sure that the LED/LCD-TVs input setting (e.g., VIDEO 1) is correct. vision. The device is likely to enter screen saver status. Try to reset the device.
INFORMATION-----------------------------------------------------------------------------------------------------------------HDMI connections The 4:3 aspect ratio picture expands left and right. Change “TV Aspect ” type to “16:9 Wide”. Screen size is wrong. BD-Live and USB connections Cannot connect network After network connection, cannot download file Check if the disc is a legal copy. Confirm whether the network connection is ok. Check if the capacity of Storage is full.
ZZZ JUXQGLJ FRP
%OX UD\ 3OD\HU *%3 ' '(
INHALT-----------------------------------------------------------------------------------------------------------------------------------------------3 AUFSTELLEN UND SICHERHEIT 4 4 4 BLU-RAY PLAYER GBP 7000 3D Lieferumfang Besonderheiten des Blu-ray Players 6 6 7 AUF EINEN BLICK Die Bedienelemente des Blu-ray Player Die Fernbedienung 9 9 ANSCHLIESSEN/VORBEREITEN LED/LCD TV anschließen – mit einem HDMI Kabel LED/LCD TV anschließen – mit CinchKabel Digitales Audiosystem anschließen – mit einem Cinch-Ka
AUFSTELLEN UND SICHERHEIT --------------------------------------------------------Beachten Sie beim Aufstellen des Blu-ray Players bitte die folgenden Hinweise: 7 7 7 7 7 7 7 7 7 Der Blu-ray Player ist für die Wiedergabe von Bild- und Tonsignalen von Blu-ray Discs, DVDs und externen USB-Datenträgern bestimmt. Jede andere Verwendung ist ausdrücklich ausgeschlosen. Soll das Gerät in Wandregalen oder Schränken aufgestellt werden, auf ausreichende Belüftung achten.
BLU-RAY PLAYER GBP 7000 3D -----------------------------------------------------Lieferumfang HDMI Kabel angeschlossen werden und mit 1080 p 50 Bilder kompatibel sein.
BLU-RAY PLAYER GBP 7000 3D -----------------------------------------------------Disc Typ 3D Blu-ray Disc Blu-ray Disc DVD-video Disc (DVD-ROM) Kennzeichnung Hinweise: 7 Beschreibbare DVDs (DVD-RW, DVD-R) müssen finalisiert werden; nur der VR Modus ist zulässig. Bei einigen Disctypen kann es sein, dass die Wiedergabe nicht funktioniert, wenn bestimmte Funktionen, wie eine Änderung des Blickwinkels und des Bildformats durchgeführt werden. Informationen über die Disc finden Sie auf deren Verpackung.
AUF EINEN BLICK --------------------------------------------------------------------------------------------------------Die Bedienelemente des Blu-ray Player Die Vorderseite des Blu-ray Players . e! 9 GBP 7000 3D Disc-Fach Disc-Fach • IR Sensor Fach für Blu-ray Discs, DVDs und CDs. Anzeige Stand-by Anzeige Schaltet das Gerät aus Stand-by ein und wieder aus. 9 Wählt den nächsten Titel, das nächste Kapitel, den nächsten Track oder die nächste Datei, wenn vorhanden.
AUF EINEN BLICK --------------------------------------------------------------------------------------------------------Die Fernbedienung 9 Schaltet das Gerät aus Stand-by ein und wieder aus. Öffnet oder schließt das DiscFach. 1-0 Zifferntasten für verschiedene Eingaben. SEARCH Wiederholtes Drücken wählt den Suchlauf-Modus (Titel, Kapitel und Zeit). Danach mit den Zifferntasten Titel, Kapitel oder Zeit eingeben und mit »ENTER« bestätigen.
AUF EINEN BLICK --------------------------------------------------------------------------------------------------------POPUP Blendet das Titelmenü der BluMENU ray Disc oder der DVD ein (der TITLE MENU Inhalt ist abhängig von der verwendeten Disc). aASs Wählen in den Menüs verschiedene Funktionen. ENTER Bestätigt in den Menüs angewählte Funktionen SETUP Ruft das Hauptmenü des Blu-ray Players auf.
ANSCHLIESSEN/VORBEREITEN ------------------------------------------------------Hinweise: 7 Schließen Sie keine anderen Geräte an, während der Blu-ray Players eingeschaltet ist. Schalten Sie die anderen Geräte ebenfalls aus, bevor Sie diese anschließen.
ANSCHLIESSEN/VORBEREITEN ------------------------------------------------------MP3 Player oder USB Memory Stick anschließen LAN-Verbindung zum Internet Splitter Modem/Router GBP 7000 3D Telefondose Blu-ray Player GBP 6000 2D BLU-RAY DISC PLAY AC:110-240 V~ 50/60 Hz POWER:17 W GLR 5800 Hinweis: 7 Der Blu-ray Player muss während des Anschließens eines USB Gerätes ausgeschaltet sein. Ist dies nicht der Fall, kann es zu einem Datenverlust führen. 1 Blu-ray Player mit »9« ausschalten.
ANSCHLIESSEN/VORBEREITEN ------------------------------------------------------Netzkabel anschließen Hinweise: 7 Prüfen Sie, ob die Spannungsangabe auf dem Typenschild (an der Rückseite des Gerätes) mit Ihrer örtlichen Netzspannung übereinstimmt. Ist dies nicht der Fall, wenden Sie sich an Ihren Fachhändler. 7 Batterien in die Fernbedienung einlegen Bevor Sie das Netzkabel in die Steckdose stecken, stellen Sie sicher, dass alle anderen Geräte angeschlossen sind.
INBETRIEBNAHME -----------------------------------------------------------------------------------------------------Blu-ray Player einschalten Wenn Sie den Blu-ray Player an die Stromversorgung anschließen, schaltet er in den Stand-by Modus. 1 Netzkabel in die Steckdose stecken. – Die Stand-by-Anzeige leuchtet. 2 Blu-ray Player mit »9« einschalten. – Die Stand-by-Anzeige erlischt. – Anzeige: »HELLO«. 3 LED/LCD TV einschalten und den Programmplatz für den Blu-ray Player wählen.
INBETRIEBNAHME -----------------------------------------------------------------------------------------------------Erstinstallation mit dem Menü „Einstellungen” Sprache der Bildschirmmenüs wählen 6\VWHP %' /LYH (LQVWHOOXQJHQ $Q]HLJH $XGLR 1 Hauptmenü mit »SETUP«aufrufen. 6SUDFKH 2 Zeile »Settings« mit »A« oder »S« wählen und mit »ENTER« bestätigen. 3 Zeile »Language« mit »A« oder »S« wählen und mit »ENTER« bestätigen.
INBETRIEBNAHME -----------------------------------------------------------------------------------------------------Hinweis: 7 Die benötigte Auflösung – abhängig vom LED/LCD TV – entnehmen Sie bitte der folgenden Aufstellung: LED/LCD-TV LED/LCD-TV mit Standardauflösung (SD TV) LED/LCD-TV mit verbesserter Auflösung (ED TV) Hochauflösender LED/LCD-TV (HDTV) mit 720p Hochauflösender LED/LCD-TV (HDTV) mit 1080i Hochauflösender LED/LCD-TV (HDTV) mit 1080p, Anschluss an Buchse HDMI Automatische Anpassung empfohl
INBETRIEBNAHME -----------------------------------------------------------------------------------------------------Netzwerkeinstellungen für LANVerbindung Der Blu-ray Player muss am Modem/Router mit einem Ethernet Kabel angeschlossen sein, siehe Kapitel „ANSCHLIESSEN/VORBEREITEN”. 1 Hauptmenü mit »SETUP«aufrufen. 2 Zeile »Einstellungen« mit »A« oder »S« wählen und mit »ENTER« bestätigen. 3 Zeile »Netzwerk« mit »A« oder »S« wählen und mit »ENTER« bestätigen.
INBETRIEBNAHME -----------------------------------------------------------------------------------------------------10 Menüoption »Sekundäre DNS« mit »A« oder »S« wählen und mit »ENTER« bestätigen. Daten für die Sekundäre DNS mit den Zifferntasten eingeben. Die Schaltfläche »OK« mit »S« wählen und Eingabe mit »ENTER« bestätigen, oder zum Abbrechen der Einstellung die Schaltfläche »Abbrechen« mit »s« wählen und mit »ENTER« bestätigen.
INBETRIEBNAHME -----------------------------------------------------------------------------------------------------Hinweise: 7 Sie können zwischen Ziffern, Groß- und Kleinbuchstaben sowie Sonderzeichen wählen. 7 Bei Fehleingaben mit »A«, »S«, »a« oder »s« die Schaltfläche » « wählen und mit »ENTER« bestätigen. Das letzte Zeichen wird gelöscht.
INBETRIEBNAHME -----------------------------------------------------------------------------------------------------Hinweise: 7 Mit den Schaltflächen » « und »×« auf der Tastatur können Sie zwischen Ziffern, Kleinund Großbuchstaben sowie Sonderzeichen wählen. 7 Bei Fehleingaben mit »A«, »S«, »a« oder »s« die Schaltfläche » « wählen und mit »ENTER« bestätigen. Das letzte Zeichen wird gelöscht. 6 Die Option »Passwort« mit »A« oder »S« wählen und mit »ENTER« bestätigen. – Die Tastatur erscheint.
WIEDERGABE EINER BD/DVD ------------------------------------------------------------Diese Position umfasst die Urheberrechtstechnologie, die von U.S. Patenten und anderen Rechten geistigen Eigentums geschützt wird. Der Gebrauch dieser durch Urheberrecht geschützten Technologie muss von der Rovi Corporation genehmigt werden und ist nur für die private Nutzung vorgesehen, es sei denn, dies ist von der Rovi Corporation anderweitig genehmigt. Zurückbauen oder Auseinanderbauen des Gerätes ist untersagt.
WIEDERGABE EINER BD/DVD ------------------------------------------------------------Wiedergabe 1 Wenn die Schaltfläche »Abspielen« eingeblendet wird, diese mit den Cursortasten wählen und mit »ENTER« bestätigen; oder Wiedergabe mit » « starten. – Die Wiedergabe beginnt. Hinweis: 7 Wenn die Meldung »Verboten« auf dem Bildschirm angezeigt wird, ist die gewählte Funktion mit dieser Disc nicht möglich. 2 Auf Wiedergabe-Pause (Standbild) mit » schalten. 3 Wiedergabe mit » « « fortsetzen.
WIEDERGABE EINER BD/DVD ------------------------------------------------------------Kapitel schrittweise wählen 1 Vorheriges Kapitel wählen, dazu während der Wiedergabe » « drücken, nächstes Kapitel wählen, dazu während der Wiedergabe » « drücken. Such-Funktionen 1 Suchlauf-Modus (Titel, Kapitel oder Zeit) wählen, dazu »SEARCH« wiederholt drücken. 2 Mit den Zifferntasten Titel, Kapitel oder Zeit eingeben und mit »ENTER« bestätigen. Hinweis: 7 Um z.B.
WIEDERGABE EINER BD/DVD ------------------------------------------------------------3 Im Untertitelmenü die gewünschten Optionen mit den Cursortasten wählen und mit »ENTER« bestätigen. – Anzeige: z. B. » 01/02 DEU«. 1 Während der Wiedergabe »POPUP MENU /TITELMENU« drücken. 4 Untertitel abschalten, dazu im Untertitelmenü mit den Cursortasten die Option »Untertitel Aus« wählen und mit »ENTER« bestätigen. 3 Menü mit »POPUP MENU/TITELMENU« abschalten.
DIE BD LIVE-FUNKTIONEN -----------------------------------------------------------------------Einige Blu-ray Discs enthalten zusätzliches Bonusmaterial (BD LIVE). Um diese Funktionen nutzen zu können, muss der Blu-ray Player mit dem Internet verbunden sein und ein zusätzlicher Speicherplatz z.B. durch einen USB-Memory Stick zur Verfügung stehen. Die BD Live-Funktionen bieten: – das Laden von neue Filmtrailern, – zusätzliche „Kommentare” von Schauspielern und Regisseuren, – Spiele und Chats.
DIE BD LIVE-FUNKTIONEN -----------------------------------------------------------------------BD Live anwenden 1 Disc-Fach mit » « öffnen. – Anzeige: »OPEN«. 2 Gewünschte Blu-ray Disc – mit dem Aufdruck (Labelseite) nach oben in das Disc-Fach einlegen. BD Live Hinweise 7 7 3 Disc-Fach mit » « schließen. 4 Wiedergabe mit » « starten. 5 Während der Wiedergabe mit »POPUP MENU TITELMENU« das Pop-Up oder Titelmenü der Disc öffnen. 6 Die Option »BD LIVE« mit »A« oder »S« wählen und mit »ENTER« bestätigen.
WIEDERGABE VON AUDIO/VIDEO DATEIEN -----Inhalte eines Datenspeichers oder eines USB-Memory Sticks wiedergeben Vorbereiten 1 Blu-ray Player mit »8« ausschalten. 2 Datenspeicher mit einem Standard USB Kabel an die Buchse » « des Blu-ray Players anschließen; oder USB Stecker des USB-Memory Sticks in die Buchse » « des Blu-ray Players stecken. Einen Titel, einen Track oder ein Bild wiedergeben 1 Gewünschte Option »Videos«, »Musik« oder »Bilder« mit »A« oder »S« wählen und mit »ENTER« bestätigen.
WIEDERGABE VON AUDIO/VIDEO DATEIEN -----Bild-CDs wiedergeben Bilder anzeigen Sie können digitale Foto- oder Musikdateien wiedergeben, die auf eine Datendisc DVD+/-R, DVD+/-R/(W) oder auf einer Blu-ray Disc gespeichert wurden. 1 Das gewünschte Bild mit»A«, »S«, »a« oder »s« wählen und mit »ENTER« bestätigen. Vorbereiten 2 Bildwiedergabe mit »7« beenden. Zusätzliche Wiedergabe-Funktionen 1 Disc-Fach mit » « öffnen. – Anzeige: »OPEN«. 7 2 Gewünschte Disc in das Disc-Fach einlegen.
WIEDERGABE VON AUDIO/VIDEO DATEIEN -----Audio CDs wiedergeben Wiedergabe Vorbereiten 1 Den gewünschten Ordner/Titel mit »A«, »S«, »a« oder »s« wählen und mit »ENTER« bestätigen. 1 Disc-Fach mit » « öffnen. – Anzeige: »OPEN«. 2 Gewünschte Disc in das Disc-Fach einlegen. 2 Wiedergabe mit » « starten. – Die Wiedergabe wird gestartet. 3 Disc-Fach mit » « schließen. – Anzeige: »CLOSE«. 4 Zeile »Medien« mit »A« oder »S« wählen und mit »ENTER« bestätigen. – Das Untermenü wird eingeblendet.
NETFUSION MODUS --------------------------------------------------------------------------------------------Was ist NetFusion 7 7 7 7 Das Gerät unterstützt NetFusion. Dadurch können Sie das Streaming von Medieninhalten mit der Steuerung eines angeschlossenen Medienreceivers kombinieren, während Sie Inhalte von einem anderen PC im Netzwerk darauf übertragen. Sie können auf Videos, Musik und Fotos von z.B.
NetFusion MODUS ---------------------------------------------------------------------------------------------------Vorbereiten 1 Blu-ray Player mit »8« einschalten. 2 Hauptmenü mit »SETUP« aufrufen. 3 Zeile »NetFusion« mit »A« oder »S« wählen und mit »ENTER« bestätigen. – Anzeige: » Auffinden«. 4 Den Digitalen Medien Server mit »A« oder »S« wählen und mit »ENTER« bestätigen.
SONDEREINSTELLUNGEN--------------------------------------------------------------------------Ton Einstellungen Die Einstellungen im Menü Audio 1 Hauptmenü mit »SETUP« aufrufen. Abtastrate einstellen (Downsampling) 2 Zeile »Einstellungen« mit »A« oder »S« wählen und mit »ENTER« bestätigen. 3 Zeile »Audio« mit »A« oder »S« wählen und mit »ENTER« bestätigen. – Das Menü »Audio« wird angezeigt.
SONDEREINSTELLUNGEN--------------------------------------------------------------------------Dynamik Regelung Ist nur aktiviert, wenn ein Dolby Digital Signal erkannt wird. Optionen: – Aus: Wiedergabe mit Standard Dynamik Regelung. – Ein: Aktiviert die Dynamik-Regelung. Dolby Digital-Soundtracks haben einen sehr großen Dynamik-Umfang zwischen leisen und lauten Tönen. Bei großer Lautstärke ist dies ein faszinierendes Erlebnis, das aber bisweilen störend wirken kann.
SONDEREINSTELLUNGEN--------------------------------------------------------------------------Spacheinstellungen 1 Hauptmenü mit »SETUP« aufrufen. 2 Zeile »Einstellungen« mit »A« oder »S« wählen und mit »ENTER« bestätigen. 3 Zeile »Sprache« mit »A« oder »S« wählen und mit »ENTER« bestätigen. – Das Menü »Sprache« wird eingeblendet. 6SUDFKH $Q]HLJH (LQVWHOOXQJHQ 6SUDFKH Hinweis: 7 Nicht alle Sprachen sind auf allen Discs verfügbar.
SONDEREINSTELLUNGEN--------------------------------------------------------------------------Jugendschutz-Einstellungen 1 Hauptmenü mit »SETUP« aufrufen. 2 Zeile »Einstellungen« mit »A« oder »S« wählen und mit »ENTER« bestätigen. 3 Zeile »Jugendschutz« mit »A« oder »S« wählen und mit »ENTER« bestätigen. – Das Untermenü für die Jugendschutz-PIN wird eingeblendet. $Q]HLJH $XV .
SONDEREINSTELLUNGEN--------------------------------------------------------------------------Systemeinstellungen Dauer des Bildschirmschoners 1 Hauptmenü mit »SETUP« aufrufen. 2 Zeile »Einstellungen« mit »A« oder »S« wählen und mit »ENTER« bestätigen. 3 Zeile »System« mit »A« oder »S« wählen und mit »ENTER« bestätigen. – Das Menü »System« wird eingeblendet.
INFORMATIONEN------------------------------------------------------------------------------------------------------Lizenzbedingungen Hergestellt unter Lizenz der Dolby Laboratories. Dolby und das Doppel-D Symbol sind Warenzeichen der Dolby Laboratories. Umwelthinweis werden können. Dieses Produkt wurde aus hochwertigen Materialien und Teilen hergestellt, die für das Recycling tauglich sind und wieder verwendet Hergestellt unter Lizenz unter den U.S.
INFORMATIONEN------------------------------------------------------------------------------------------------------Blu-ray Player reinigen Technische Daten Netzkabel aus der Steckdose ziehen. Zum Reinigen ein feuchtes Tuch und ein mildes Reinigungsmittel verwenden. Verwenden Sie keine Reinigungsmittel, die Alkohol, Spiritus, Ammoniak oder Scheuermittel enthalten. Dieses Gerät ist funkentstört entsprechend den geltenden EU Richtlinien.
INFORMATIONEN------------------------------------------------------------------------------------------------------System Stromversorgung Betriebsspannung: Netzfrequenz: Max.
INFORMATIONEN------------------------------------------------------------------------------------------------------Störungen selbst beheben Nicht jede Bild- und Tonstörung ist auf einen Defekt Ihres Blu-ray-Players zurückzuführen. Auch versehentlich herausgezogene Anschlusskabel, beschädigte Discs, sowie verbrauchte Batterien der Fernbedienung führen zu Funktionsstörungen.
INFORMATIONEN------------------------------------------------------------------------------------------------------Es dauert länger, bis der Player betriebsbereit ist. Nach dem Einschalten des Players, dauert es lange, bis Bild und Ton zu sehen/ hören sind. Das Disc-Fach wird automatisch geöffnet, während die Disc gelesen wird. Dies kann systembedingt nach einem Stromausfall der Fall sein oder wenn das Netzkabel angeschlossen wurde. Wenn der Player mit einem HDMI Kabel an den LED/LCD TV angeschlossen ist.
INFORMATIONEN------------------------------------------------------------------------------------------------------TV Bildschirm und Video Die Bilder des Players werden nicht auf dem Fernsehgerät angezeigt. Der LED/LCD-TV muss an der VIDEO OUT Buchse oder an der HDMI OUT Buchse des Players angeschlossen sein. Am Fernsehgerät den richtigen Programmplatz für den Player wählen. Der Bildschirmschoner ist aktiviert.
INFORMATIONEN------------------------------------------------------------------------------------------------------Ton Anschlüsse prüfen und die Toneinstellungen im Menü »Audio« prüfen. Eingangmodus am Verstärker/Receiver prüfen, wenn einer angeschlossen ist. Kein Ton. Geringe LautTonsignal mit Taste »Audio« anwählen. stärke. Verzerrter Ton. Die Toneffekte (Re-master, V. Surround, usw.
ZZZ JUXQGLJ FRP