FCC RF EXPOSURE INFORMATION Eo in August 1998 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.
PRODUCT CONSTITUTION FREEING-RS Internal SYSTEM REQUIREMENTS Windows 958E/98/ME/2000/CE SAFETY INFORMATION Rated power should be used. Do not expose the set to direct sunlight or to heat sources. Do not use the set near high temperature and humidity. Rain or drinking water spilled on the set can result in hazards. Do not use the set near the equipment having magnetic force. Do not use or spill the inflammable on the set. Do not expose the set to vibration or excessive shock. Keep the set in a safe place.
ENVIRONMENT SETUP Modem setting @ Select ‘Modem’ in Control Panel menu of Windows 95/98. Modems Installs 5 new modem snd changes modem properties.
{stall New Modem ® Select ‘Don’t run the Hardware Installation Wizard’, then click [Next]. @ Select ‘(Standard Modem Types)’ for manufacturers and ‘Standard 19200 bps Modem’ for models, then click {Next}.
Virtual Infrared COM Port | Viaduct infrared LPT Port 150 COM PORT (CONS) ® Select “COM PORT (COMIC, then click [Next]. LEER TILES 6) Modem installation has finished.
Digit Networking [ey Make Mew Connection The Make New Connection wizard walks you step-by-step through adding (DGo to the menu of Start menu, Programs, Accessories and Networking : Communications in sequence and select “Dial-up Networking”. connections. Just Then select ‘Make new connection. (@ Type the service company name to be used at ‘Type a name for the computer you are dialing’ and select ‘Standard 19200 bps Modem’ for ‘Select a device”, then click [Configure].
Standard 19200 bps Modem Property @ After confirming ‘Communication Port {COMELY, select 115200" for “Maximum speed(bps)’ , then go to ‘Connection’ folder. {@ Click [Advanced].
Make Mew Connection @ Type the telephone number (for Telecommute, 1501), then click{Next). ® Click [Finish]. By these methods, setup has finished.
B iat Up Networking telecommute Phone # or Host: Device name: Standard 19200 ps Modem Ta establish » dial-up connection © Click the ‘Properties’ of ‘New’ icon which is made in the ‘Dial-up Networking’ folder. @ By clicking the right side of mouse, you can see ‘Properties’ menu. DE-select ‘Use area code and Dialing Properties’ and go to ‘Server Types’ folder.
EGE] D Select “TCP/IP for ‘Allowed network protocols’, then click [TCP/IP Settings...]. # Select Server assigned IP address”, “Server assigned name server addresses’ and “Use default gateway on remote network”. Then click ‘OK two times.
@ Double-click the new icon which is made in the “Dial-up Networking’ folder. telecommute Phone # or Host: Device hams: Standard 19200 bps Madam To establish & dial-up cone @ Type ‘User name’ and ‘Password’, then click ‘Connect’.
CONNECTION/DISCONNECTION TO CONNECT (© Double-click new icon in [dial-up connection networking] at the right side of your mouse in background screen. In ‘Connect’ window, click [Dial].
Raa @ Press “Enter” after connection TO DISCONNECT ada (@ Click [connection] icon at the right side of your mouse in the right bottom of start bas in background screen, then select “Disconnect” at the left side of your mouse.
ISO TELECOMMUTE IDENTIFICATION LABEL With regard to The FCC Rule Part 2.983 According to the requirement scion 2.925 and 2.926, the sample Label shown below shall be permanently affixed at a conspicuous Location on the device supplied to the user and be reality visible to The purchaser at the time of purchase. AIS ever COMA CELLULAR MODULE MODEL : YM-4010K FCC ID: PCEYM-A010K Serial No. : (Pr-Production) MADE IN KOREA ISO TELECOMMUTE CO.
RF Exposure Measurement 1. Introduction 2.4 GHz frequency band is regarded specially as a dangerous band for its heating harmfulness to the human body. That's why microwave oven is operating in this frequency band. The manufacturer whose product is working in this frequency band is obligatory to prove the harmfulness of his product. In this document, we try to prove the safety of radiation harmfulness to the human body. The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1210 is followed.
Pd is the limit of MPE, 1 mW/em’, If we know the maximum Gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Ref: David K. Chen, Field and Wave Electromagnetic, Second Edition, Page 640, Eq. (11.133). 4 EUT Operating condition A Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually.