DT-10 User Guide
Contents Copyright .............................................................................................................3 Disclaimer ...........................................................................................................3 Safety Information ...............................................................................................4 Getting Started ....................................................................................................5 Device Overview ...........
Copyright Copyright©2016 Group Sense Mobile-Tech Limited. All rights reserved. No part of this document may be reproduced, distributed, translated, or stored in any form without the prior written permission of Group Sense Mobile-Tech Limited. All brands and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Product specifications are subject to change without prior notice. Disclaimer The contents of this document are provided as is.
Safety Information Please read the following information carefully before using the device for the first time, and keep this User Guide in a safe place for future reference. Always treat the device with care and keep it in a clean and dust-free environment. Do not expose the device to extremely hot, cold or humid environment. The operation temperature is from –30°C to 60°C. Do not use the device in wet or rainy conditions.
Getting Started Device Overview No.
Charging the Device Charging with the AC/DC adaptor 1. Connect the Micro-USB cable into the AC/DC adaptor. 2. Connect the Micro-USB cable to the Micro-USB port of the device. 3. Plug the AC/DC adaptor into a suitable power socket, and fully charge the device. Charging with the Docking 1. Insert and lock the device in the docking slot. 2. Connect the power cable to the power connector of the docking. 3. Plug the power cable into a suitable power socket.
Using the Device Using Wi-Fi To connect to a WLAN: 1. Select Start 2. Slide the Wi-Fi On/Off button to the On position. 3. Select an AP from the list, and click Connect. 4. Input the network key when prompted. > Settings > Network & Internet > Wi-Fi. Using Cellular To connect to a cellular network: 1. Power off the device. 2. Insert a SIM card into the SIM card slot. 3. Power on the device. 4. Select Start 5. Click the celluar network, and select Advanced options. 6.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.