MANUAL
Thank you for purchasing iTalk iPod Voice Recorder. In a few moments you'll be using your iPod in ways you never thought possible. With iTalk you can now record voice memos, ideas, seminars, meetings - all with the simplicity of your iPod wherever you go. Getting started is simple. Just connect your iTalk to the top of your iPod and its recording functions will automatically appear. For more details, please read the complete step-by-step instructions on the inside of this booklet.
SETUP AND RECORDING Follow these simple steps to get started recording and playing back Voice Memos. 1 Securely connect iTalk to your iPod. The red LED on iTalk will blink when it is recognized by the iPod. 2 Your iPod will automatically switch to Voice Memo mode, ready to record. 3 Press the Play button 4 ( ;) on the iPod to begin recording. The iTalk’s red LED will light up to indicate it's recording and a 'Recording' prompt will pulse on the screen of the iPod.
USING iTALK AS AN ALARM CLOCK You may be aware that your iPod has an Alarm Clock function. But you may not know you can use iTalk to play any audio you choose as an Alarm. With iTalk connected: 1 Select Extras>Clock>Alarm Clock>Alarm On. 2 Set the Alarm time on that same page 3 Instead of selecting Beep under Sound, select a song. Your iTalk speaker will now wake you up to music (or noise if you choose) instead of a simple “Beep.” And it will keep playing until you hit the Play button 4 ( ;).
TROUBLESHOOTING My iTalk isn’t working. It doesn’t go directly to Record Mode. Disconnect your iTalk for one minute, then reconnect. When the red LED blinks, your iTalk is working and will go directly to Record Mode. If this doesn't work or there seems to be a problem with your iPod, you may want to reset it. To reset iPod, hold the Menu and Play buttons down until the Apple logo appears. Your iPod will start up a few moments after that.
iTALK SPECIFICATIONS Physical Specs Dimensions (2.4" x .84" x .62") (61 x 21 x 16 mm) Weight - 1.2 oz (30 grams) iPod Connection Headphone/Output - 3.5mm stereo (with iPod audio play through) External Mic Input - 3.5mm mono (input switched when connected) Speaker Impedance - 8 Ohms Max output power - 2 Watts Speaker size -16 mm Freq Response 20Hz - 20kHz Mic Automatic Gain Control (AGC) - 30 dB Ratio - Attack Time - 100 ms - Recovery Time - 3.