Lattice1 Setup Manual Step 1: Plug the power adapter into your Lattice1 Note: Please use the power adapter provided with the Lattice1 1
Step 2: Plug the power adapter into a wall outlet Step 3: Connect the Lattice1 to WIFI Download the GridPlus Mobile App from the Apple Store and follow the below instructions. Note: The Lattice1 needs to be connected to the internet to work as intended.
Step 4: Begin using the Lattice1 Operator’s Manual WARNING: DISASSEMBLY WILL RENDER LATTICE1 UNUSABLE AND MAY RESULT IN LOSS OF FUNDS GridPlus Inc. reserves the right to modify the content, specifications, and parameters included in this user guide, which is subject to change without prior notice. Due to regular product updates and improvements, certain details present in this manual may not be up to date or match exactly with the product provided.
Introduction Thank you for purchasing our product. Please ensure that ALL USERS of our products have read this manual and understand its contents prior to using the Lattice1 and SafeCards. Please visit our website, Gridplus.io, for the most up to date information on our products, software, and any updates to our product manuals.
Ethernet Cord The Ethernet cord is used to connect to internet without using WIFI. SafeCard SafeCards are used to store assets locally. Assets can be moved from card to Lattice1 once the card is inserted, chip facing forward, into the device. Please refer to the Setup Manual for instructions for powering the Lattice1 on. Note: SafeCards are not necessary for use, but can be used as vessels for storing cryptographic tokens.
Front Card Reader Touch Screen Display Touch Screen Display Card Reader Main interface of the Lattice1 Port for the insertion of SafeCard (chip facing up) Rear Power Port Ethernet Port Charging interface for the Lattice1 and power adapter Port for connecting to the internet if the user is not using WIFI 7
Safety Please read all the safety information below before using your Lattice1. The Lattice1 must be installed and used in strict accordance with the instructions provided in our manual. Tampering or attempting to disassemble the Lattice1 will cause the Lattice1 to render itself unusable, causing all of the stored information to be lost. The Lattice1 must not be dropped, shaken, or hit as this may also trigger the anti-tamper mechanism.
Correctly dispose of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To safely recycle your Lattice1, please use return and collection systems. The Lattice1 has been tested and meets applicable limits for radio frequency (RF) exposure.
ISED Canada Compliance Statement: This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Placeholder for labeling on the box ©GridPlus Inc. All rights reserved. The Lattice1 and SafeCards are trademarks of GridPlus Inc. The Lattice1 is proudly designed and manufactured in the United States.
