Overview Application 1
Power Switch Turn on the GDS High Speed Sensor by flipping the button, and Turn off the GDS High Speed Sensor by flipping the button again. Power input 24V 5A power adapter (standard configuration) RJ45 Connect the device to PC via a network cable, So they can communicate with each other Bluetooth Module The Bluetooth module with PCB Antenna is pasted on PCB.
Bluetooth Module PCB Status indicator When the indicator color is blue, it indicates that the device is running normally. But when the light turns red, it means that the device is faulty and needs to be checked. In addition, when the light is green, the sensor detects the ball and you can play.
The following are two methods of communication between PC and GDS High speed sensor. One is the network cable (default) and the other is USB Bluetooth module (optional).
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
