Specification Sheet

Technical Data

Effective November 4, 2014

ONW-P – NeoSwitch PIR Low Voltage

Wall Switch Sensor

Overview

The Passive Infrared Low Voltage Occupancy Sensing Wall Switch

is a motion sensing lighting control and that is used to for energy

savings and convenience. Low Voltage sensors utilize an isolated

Form C relay that integrates directly with lighting control, building,

and HVAC systems. Low voltage switches do not require conduit in

most markets thus lowering installation costs.

Features

Selectable built-in light level sensor

NEMA WD7 Guide robotic method utilized to verify coverage

patterns

Tracking/HVAC Mode

Catalog# Prepared by

Project Date

Comments Type

Technical Data

PIR

Activated

Self-Adjusting

PAGE 1
Technical Data Effective November 4, 2014 ONW-P – NeoSwitch PIR Low Voltage Wall Switch Sensor Catalog# Prepared by Project Date Comments Type Overview The Passive Infrared Low Voltage Occupancy Sensing Wall Switch is a motion sensing lighting control and that is used to for energy savings and convenience. Low Voltage sensors utilize an isolated Form C relay that integrates directly with lighting control, building, and HVAC systems.
PAGE 2
Technical Data November 2014 ONW-P – NeoSwitch PIR Low Voltage Wall Switch Sensor Specifications Technology Electrical Ratings Isolated Form C Relay Ratings Time Delays Coverage Light Level Sensing Operating Environment Housing Size LED Indicators Standards Passive Infrared (PIR) Input: 10-30 VDC from Greengate Switchpack or Greengate system.
PAGE 3
Technical Data ONW-P – NeoSwitch PIR Low Voltage Wall Switch Sensor November 2014 Wiring Diagrams Low Voltage Wiring Diagram HOT LINE WHITE USE BLACK LEAD FOR 120 VAC. USE ORANGE LEAD FOR 277 VAC. CAP UNUSED LEAD. HOT NEUTRAL LOAD BLUE ORANGE (N.O.) RED (10-30 VDC) GRAY (COMMON) BLUE (CONTROL) PURPLE (N.C.
PAGE 4
Technical Data ONW-P – NeoSwitch PIR Low Voltage Wall Switch Sensor November 2014 Controls DIP Switch Legend Time Delay Red (PIR) Detection LEDs PIR Lens Isolated Relay PIR Sensitivity Walk-Through Mode Override EcoMeter Relay 1 1 2 Auto* 5 Minutes Auto Tracking Full Disable Enable Disable Manual HVAC 50% Enable Disable Enable 15 Minutes 30 Minutes *Self-Adjusts to 10 min.