Full Product Manual

INS765LD 30 lbs (13.6 kg)
Application Coverage Chart
THIS IS GREENFIBER
®
ALL BORATE LOOSE FILL FORMULA INSULATION
ATTIC CARD
GreenFiber provides outstanding thermal performance, fire-resistance and
sound control. Consisting of 85% recycled content, GreenFiber Insulation is
specially treated for flame resistance.
R-value means resistance to heat flow - the higher the R-value, the greater
the insulation power.
CERTIFICATION:
This insulation has been installed in conformance with the above
recommendations, to provide a value of R-_______ using ______ bags of this
insulation to cover ______ square feet of area.
Builder’s Signature: ____________________________________________
Company Name: ______________________________________________
Date: ____________
Applicator’s Signature: __________________________________________
Company Name: _______________________________________________
Date: _____________
FOR MORE INFORMATION CONTACT GREENFIBER:
800.228.0024
[e-mail]
GreenFiber Corporate Office
2500 Distribution Street, Suite 200
Charlotte NC 28203
www.greenfiber.com
MANUFACTURING LOCATIONS:
Albany, NY
Charlotte, NC
Delphos, OH
Norfolk, NE
Phoenix, AZ
Salt Lake City, UT
Tampa, FL
Waco, TX
PM-6.3-327 Rev A 08/11
TM-6.4-11 Rev C 05/10
R-Value at
75° F Mean
Temp.
Valor de
resistencia
termica
(valor R) a
75 F de
temperatura
media
Minimum Thickness
(inches)
Expesor minimo
(en pulgadas)
Net Coverage
(no adjustment for framing)
Cubertura neta (sin compensación
para el estructura)
Net Coverage (adjusted for 2” x 6“
framing on 16” centers)
Cobertura neta (con compensación para
una estructura de 2" x 6" en
centros de 16")
Initial
Installed
Thickness
Espesor
inicial
instalado
Maximum
Sq. Ft. per Bag
Pies cuadrados
máximos
por bolsa
Maximum
Sq. Ft. per Bag
Pies cuadrados
máximos
por bolsa
Mimimum
Bags per
1,000 Sq. Ft.
Cantidad minima
de bolsas
por 1,000
pies cuadrados
Mimimum
Bags per
1,000 Sq. Ft.
Cantidad minima
de bolsas
por 1,000
pies cuadrados
Minimum
Weight per
Sq. Ft.
Peso minimo
por pie cuadrado
Settled
Thickness
Espesor
asentado
MADE IN THE
U S A
11
13
19
22
26
30
32
38
40
44
48
49
50
60
3.36
3.99
5.86
6.77
7.99
9.19
9.79
11.57
12.16
13.33
14.49
14.78
15.07
17.96
3.02
3.59
5.27
6.10
7.19
8.27
8.81
10.41
10.94
11.99
13.04
13.30
13.57
16.16
100.8
83.5
54.3
45.9
37.8
32.0
29.6
24.1
22.7
20.2
18.1
17.7
17.2
13.7
9.9
12.0
18.4
21.8
26.4
31.2
33.7
41.4
44.1
49.6
55.2
56.6
58.1
73.1
0.298
0.359
0.552
0.653
0.793
0.937
1.01
1.24
1.32
1.49
1.66
1.70
1.74
2.19
111.3
92.2
59.6
49.7
40.5
33.9
31.3
25.3
23.7
21.0
18.8
18.3
17.8
14.1
9.0
10.8
16.8
20.1
24.7
29.5
32.0
39.6
42.2
47.6
53.2
54.6
56.1
71.0
THE ABOVE COVERAGE CHART IS BASED ON A NOMINAL BAG WEIGHT OF 30 LBS USING A VOLUMATIC III, 3rd GEAR AND 8”
GATE. THE CHART IS BASED ON SETTLED THICKNESS AND IS FOR ESTIMATING PURPOSES ONLY. DO NOT EXCEED MAXIMUM
SQUARE FEET COVERAGE PER BAG. THE APPLICATOR MUST INSTALL BOTH THE MINIMUM NUMBER OF BAGS PER 1000 SQ. FT.
AND THE MINIMUM INSTALLED THICKNESS TO INSURE THE STATED R-VALUE HAS BEEN REACHED. FAILURE TO MEET BOTH
THESE REQUIREMENTS MAY PREVENT THE APPLICATION OF SPECIFIED R-VALUE. THIS PRODUCT IS INTENDED FOR DRY
APPLICATION ONLY. JOB CONDITIONS, APLLICATION TECHNIQUES, EQUIPMENT, AND SETTING CAN INFLUENCE ACTUAL
COVERAGE. DO NOT ADD WATER TO THIS PRODUCT. MINIMUM NET WIEGHT IS 28.5 LBS.
THIS COVERAGE CHART IS FOR DRY APPLICATIONS ONLY AND IS BASED ON THE KRENDL KS200, WITH MATERIAL APPLIED DRY. FOR MAXIMUM COVERAGE PER
BAG (ADJUSTED FOR FRAMING), THE FRAMING FACTOR FOR 16" OC STUD SPACING IS 9.375%; FOR 24" OC STUD SPACING THE FRAMING FACTOR IS 6.25%.
Estructura
(inches)
(pulgadas)
Thermal Resistance
(R value)
13
21
2x4
2x6
3.5
5.5
1.02
1.60
29.39
18.70
32.4
20.6
31.3
19.9
Dry Dense Pack Sidewall Applications (3.5 pcf minimum installed density) 30 lbs. (13.6 kg) INS765LD
Resistencia térmic a
(R)
Framing Installed Thickness
Espesor instalado
Maximum Coverage Per Bag
(Adjusted for Framing) ft
2
/Bag
Cobertura máxima por bolsa
(con compensación para la estructura)
ft
2
/Bag
Maximum Coverage Per Bag
(No Adjustment for Framing)
ft
2
/Bag
Minimum Wt.
Per Square Foot
lb/ft
2
Peso mínimo por
pie cuadrado
lb/ft
2
Cobertura máxima por bolsa
(sin compensación para la estructura)
ft
2
/Bag
(16” oc) (24” oc)