Specification

INS765LD 30 lbs (13.6 kg)
Application Coverage Chart
THIS IS GREENFIBER
®
ALL BORATE LOOSE FILL FORMULA INSULATION
ATTIC CARD
GreenFiber provides outstanding thermal performance, fire-resistance and
sound control. Consisting of up to 85% recycled content, GreenFiber Insulation
is specially treated for flame resistance.
R-value means resistance to heat flow - the higher the R-value, the greater
the insulation power.
CERTIFICATION:
This insulation has been installed in conformance with the above
recommendations, to provide a value of R-_______ using ______ bags of this
insulation to cover ______ square feet of area.
Builder’s Signature: ____________________________________________
Company Name: ______________________________________________
Date: ____________
Applicator’s Signature: __________________________________________
Company Name: _______________________________________________
Date: _____________
FOR MORE INFORMATION CONTACT GREENFIBER:
800.228.0024
[e-mail]
GreenFiber Corporate Office
5500 77 Center Drive, Suite 100
Charlotte NC 28217
www.greenfiber.com
MANUFACTURING LOCATIONS:
PM-6.3-327 Rev B 01/16
R-Value at
75° F Mean
Temp.
Valor de
resistencia
termica
(valor R) a
75 F de
temperatura
media
Minimum Thickness
(inches)
Expesor minimo
(en pulgadas)
Net Coverage
(no adjustment for framing)
Cubertura neta (sin compensación
para el estructura)
Net Coverage (adjusted for 2” x 6“
framing on 16” centers)
Cobertura neta (con compensación para
una estructura de 2" x 6" en
centros de 16")
Initial
Installed
Thickness
Espesor
inicial
instalado
Maximum
Sq. Ft. per Bag
Pies cuadrados
máximos
por bolsa
Maximum
Sq. Ft. per Bag
Pies cuadrados
máximos
por bolsa
Mimimum
Bags per
1,000 Sq. Ft.
Cantidad minima
de bolsas
por 1,000
pies cuadrados
Mimimum
Bags per
1,000 Sq. Ft.
Cantidad minima
de bolsas
por 1,000
pies cuadrados
Minimum
Weight per
Sq. Ft.
Peso minimo
por pie cuadrado
Settled
Thickness
Espesor
asentado
MADE IN THE
USA
11
13
19
22
26
30
32
38
40
44
48
49
50
60
3.36
3.99
5.86
6.77
7.99
9.19
9.79
11.57
12.16
13.33
14.49
14.78
15.07
17.96
3.02
3.59
5.27
6.10
7.19
8.27
8.81
10.41
10.94
11.99
13.04
13.30
13.57
16.16
100.8
83.5
54.3
45.9
37.8
32.0
29.6
24.1
22.7
20.2
18.1
17.7
17.2
13.7
9.9
12.0
18.4
21.8
26.4
31.2
33.7
41.4
44.1
49.6
55.2
56.6
58.1
73.1
0.298
0.359
0.552
0.653
0.793
0.937
1.01
1.24
1.32
1.49
1.66
1.70
1.74
2.19
111.3
92.2
59.6
49.7
40.5
33.9
31.3
25.3
23.7
21.0
18.8
18.3
17.8
14.1
9.0
10.8
16.8
20.1
24.7
29.5
32.0
39.6
42.2
47.6
53.2
54.6
56.1
71.0
THIS COVERAGE CHART IS FOR DRY APPLICATIONS ONLY AND IS BASED ON THE KRENDL KS200, WITH MATERIAL APPLIED DRY. FOR MAXIMUM COVERAGE PER
BAG (ADJUSTED FOR FRAMING), THE FRAMING FACTOR FOR 16" OC STUD SPACING IS 9.375%; FOR 24" OC STUD SPACING THE FRAMING FACTOR IS 6.25%.
Estructura
(inches)
(pulgadas)
Thermal Resistance
(R value)
13
21
2x4
2x6
3.5
5.5
1.02
1.60
29.39
18.70
32.4
20.6
31.3
19.9
Dry Dense Pack Sidewall Applications (3.5 pcf minimum installed density) 30 lbs. (13.6 kg) INS765LD
Resistencia térmic a
(R)
Framing Installed Thickness
Espesor instalado
Maximum Coverage Per Bag
(Adjusted for Framing) ft
2
/Bag
Cobertura máxima por bolsa
(con compensación para la estructura)
ft
2
/Bag
Maximum Coverage Per Bag
(No Adjustment for Framing)
ft
2
/Bag
Minimum Wt.
Per Square Foot
lb/ft
2
Peso mínimo por
pie cuadrado
lb/ft
2
Cobertura máxima por bolsa
(sin compensación para la estructura)
ft
2
/Bag
(16” oc) (24” oc)
Wilkes-Barre, PA 18702
Delphos, OH 45833
Debert, Nova Scotia
Norfolk, NE 68701
Chandler, AZ 85043
Salt Lake City, UT 84119
Tampa, FL 33605
Waco, TX 76704
Vars, Ontario
UL Classified.
see complete marking on back of packaging
THE ABOVE COVERAGE CHART IS BASED ON A NOMINAL BAG WEIGHT OF 30 LBS USING A VOLUMATIC III, 3rd GEAR AND 8” GATE. THE
CHART IS BASED ON SETTLED THICKNESS AND IS FOR ESTIMATING PURPOSES ONLY. JOB CONDITIONS, APPLICATION TECHNIQUES,
EQUIPMENT, AND SETTINGS CAN INFLUENCE ACTUAL COVERAGE. ACTUAL COVERAGE MAY VARY BASED ON CONDITIONS AND IS NOT
GUARANTEED BY THE MANUFACTURER. DO NOT EXCEED MAXIMUM SQUARE FEET COVERAGE PER BAG. THE APPLICATOR MUST INSTALL
BOTH THE MINIMUM NUMBER OF BAGS PER 1000 SQ. FT. AND THE MINIMUM INSTALLED THICKNESS TO INSURE THE STATED R-VALUE
HAS BEEN REACHED. FAILURE TO MEET BOTH THESE REQUIREMENTS MAY PREVENT THE ACHIEVEMENT OF THE SPECIFIED R-VALUE.
THIS PRODUCT IS INTENDED FOR DRY APPLICATION ONLY. DO NOT ADD WATER TO THIS PRODUCT MINIMUM. NET WEIGHT IS 28.5 LBS.