Product Description

PRODUCT INTRODUCTION
01
GREE Cube Controller is an infrared remote controller
that can operate the air conditioner. There are different
functions on six sides. It can be linked to the mobile
phone through Bluetooth and configure functional
parameters of the air conditioner. You can quickly enable
personal modes by turning or rotating it after configuration.
It also supports child lock and search function.
PRODUCT DESCRIPTION
① ⑤
② ⑥ ⑦
02
③ ④
Diagram of GREE Cube Controller
“ ”This mode can be personalized on the App
FUNCTION INTRODUCTION
03
SLEEP
When “SLEEP” is on the top，sleep mode is set.
Default: cool, 27℃，auto fan, swing up and down,no swing around,
no timing function, traditional sleep mode.
When “Personal 1” is on the top, personal mode is set.
Default: cool, 26℃，auto fan, swing up and down, no swing left
and right.
When “Personal 2” is on the top, personal mode is set.
Default: cool, 20℃，auto fan,swing up and down , swing left and
right.
When “AUTO” is on the top, AUTO mode is set.
Default: auto fan, swing up and down, swing left and right
(SLEEP mode is turned off).
FUNCTION INTRODUCTION
03
Only the “GREE” side can be rotated. When “GREE” is on the
top, rotate GREE Cube Controller 60°clockwise in one second to
increase set temperature by 1℃; rotate the cube counterclockwise
to decrease set temperature by 1℃. (Unavailable in AUTO mode)
Personal 1
Personal 2
AUTO
GREE on Top (temperature control)
Blank side (Shutdown)
When the blank side is on the top, the air conditioner is turned off.
Turn 90°to switch mode.
Turn to the blank side to
turn off the air conditioner.
When battery-power is low, indicator
light flashes twice and buzzer rings
once to remind user to replace battery.
① Function Switch ③ Shutdown
④ Low-power indicator
OPERATION INSTRUCTION
04
When battery power is low, indicator
light flashes twice and buzzer rings
once to remind user to replace battery.
② Temperature adjustment
GREE CUBE CONTROLLER
Printing Date:
Version Number:01
Gree Electric Appliances, Inc. of Zhuhai
Address: Jinji west road,Qianshan, Zhuhai,
Guangdong province.
Post Code: 519070
Customer Service Hotline: [phone]
Model: LYMF-02
01
Indicator light
Battery cover
Cover groove
Plectrum to open cover
Reset button
Battery
Built-in buzzer
Caution:The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules and Industry
Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device,pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable protection
against harmful interference in a residential installation.This
equipment generates, usesand can radiate radio frequency energy
and, if not installedand used in accordance with the instructions,may
cause harmful interference to radio communications.However, there
is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC& IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure
limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Déclaration d’IC sur l’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux radiations
définies par le Canada pour des environnements non contrôlés.
Cet émetteur ne doit pas être installé au même endroit ni utilisé avec
une autre antenne ou un autre émetteur.