Special note: matching instructions This model adopts RF remote control. The remote controller shall be matched with the air conditioner before operation, otherwise the remote control will be invalid. Before operation, please read the instructions in this page carefully and then do the corresponding matching operation. Note Please done the following operation within 2m from the unit. Matching is not needed anymore once it is done.
Wifi Smart Thank you for choosing our product. For proper operation, please read and keep this manual carefully. If you have lost the Owner’s Manual, please contact the local agent or visit www.gree.com or sent email to global@gree.com.cn for electronic version.
Content Download and install App......................................................................... 1 Configuration.................................................................................................. 1 Functions introduction............................................................................... 3 User registration.................................................................................................... 3 Personal setting..................................................
Operation of Smart Control (Smart Phone, Tablet PC) Operation Instructions Download and install App Scan the following QR code (also indicated on package box) with your smart phone and download Wifi Smart. Install the App according to its guidance. When successfully installed, your smart phone homepage will show this icon Configuration Before operation, please finish the following configuration in order to realize Wifi control and the connection between air conditioner and intelligent device. 1.
Operation of Smart Control (Smart Phone, Tablet PC) Step 2: Open App and the screen will show the air conditioner that you just connected. Click this air conditioner to enter and realize short-distance control, as shown below. Please refer to "Functions introduction" for specific control methods. 2.Short-distance and long-distance control setting for air conditioner connecting router Step 1: Under short-distance control, return to the homepage "Device".
Operation of Smart Control (Smart Phone, Tablet PC) configuration succeeds, App will notify user that configuration is successful and return to homepage. NOTICE: Please select the encrypt mode "empty" if your wifi has been set without password. Functions introduction 1.User registration Purpose: To realize long-distance control Operation instruction: For the first time login, you have to register a new username.
Operation of Smart Control (Smart Phone, Tablet PC) (2) Enter your email address and tap "Get verification code". Wait until you receive the verification code. Enter the code and then tap "OK" to log in. Username will appear. As shown here, the username is "test". (3) If password is forgotten, you can reset the password with your email address. Tap "Forgot password" and enter the page "Forgot password". Tap "Verification code" to get a email verification code. Enter a new password and tap "OK" to log in.
Operation of Smart Control (Smart Phone, Tablet PC) Step 1: Tap and hold "babyroom" to enter the page "Edit device". Tap "Image" to select the source of image. Select from "Default images" or "Take photo" or "Choose from photos" and save an image. Step 2: Tap "Name" to change device name,enable button ''Lock device'' to lock the device. Save it and the new device name will be shown.
Operation of Smart Control (Smart Phone, Tablet PC) (2) Set preset name Step 1: Tap at the top right corner of the homepage "Device". Select "Add preset" and enter the page "Preset edit". Step 2: Choose the time. Tap "Name". As shown in the picture, its name is "baby room". For timer type, select "On". Then select the repeating days. Save the setting of preset name. (3) Set device image Please refer to step 1 in 2(1) 3.
Operation of Smart Control (Smart Phone, Tablet PC) Tap "babyroom" and enter the page of air conditioner control. Tap to turn on the control switch. Tap or to increase or decrease temperature. Tap working mode. Tap to enter the page of fan speed adjustment.
Operation of Smart Control (Smart Phone, Tablet PC) Tap and go around the circle to adjust fan speed. Step 2: Advanced settings Tap to enter advanced settings. You may select "Air", "Dry", "Health", "Light", "Sleep" or "Energy saving". (2) Advanced control functions: Set scene; Preset; Link: Infrared control (only applicable to smart phone with infrared emitter) Set scene: Preset the operation of several smart devices by one tap.
Operation of Smart Control (Smart Phone, Tablet PC) Continue to select the next execution device as instructed above. Tap to set the interval. Tap "Save". Then the scene "Back home" will be in execution. You may view the execution condition of the scene. (3) Preset includes single-device preset and multi-device preset Single-device preset: This can preset a certain device to be On/Off at a specific time.
Operation of Smart Control (Smart Phone, Tablet PC) On the homepage "Device", take air conditioner "babyroom" as an example. Tap at the bottom of the page "babyroom". Then you will enter the page "Preset edit". Slide up and down to set the time. If you want to synchronize the time, tap " synchronize". Tap "Name" to customize the preset name. Preset device can’t be selected and it will default to "babyroom". Select "On" for the timer type. Select repeating days to complete the preset.
Operation of Smart Control (Smart Phone, Tablet PC) Multi-device preset: This can preset multiple devices to execute a command at a specific time. Please refer to the instructions as how to set preset time, name, timer type and repeating days for a single device. Tap "Preset device" to select one or more devices. Then return to the page "Device". (4) Link(This function is applicable to partial of models) Select a master device.
Operation of Smart Control (Smart Phone, Tablet PC) Tap "Temperature" to enter the page "Select temperature parameter". Slide up or down to adjust temperature. Tap "Upper limit" or "Lower limit". Tap "Mode" and "On/Off" to select the status of master device. Then tap "Save". Step 2: Set time parameter for linkage. Tap "Time parameter" to enter the page "Set time". Slide rightwards to turn on the setting time. Tap "Execution time"; Then tap "Start" and "Stop" to set start time and stop time respectively.
Operation of Smart Control (Smart Phone, Tablet PC) Tap the days below "Repeat" to select the repeating days. Then tap "Save". Step 3: Select "Execute command" Tap "Execute command" and enter the page "Select device". Tap the name of device that you want to control. Tap "ON" or "OFF" and then tap "Save" to complete the linkage.
Operation of Smart Control (Smart Phone, Tablet PC) Tap "Save" and then repeat the above steps to set linkage of several scenes. (5) Infrared control (only applicable to smart phone with infrared emitter). Function: Smart phone can be used as a remote controller. Tap at the top right corner of the homepage "Device". Select "Infrared" and enter the page "Remote controller". Tap enter the page of advanced functions.
Operation of Smart Control (Smart Phone, Tablet PC) Tap to turn on the device. Tap to select mode. Tap to adjust fan speed . Tap "Health", "Energy saving", "Sleep" etc. to set advanced functions. Tap "Sleep" to enter the page "Sleep". You can select "Traditional sleep", "Expert sleep" or "DIY sleep". Tap "DIY sleep" and then tap the left and right arrows to set sleep time. Tap up and down arrows to adjust temperature at a specific sleep time. 4.
Operation of Smart Control (Smart Phone, Tablet PC) Step 2: Another smart phone to be imported. Tap the model name and wait for the download. (2) Backup: To keep backup of the quick configuration information and unit’s information, including backup to cloud and backup list on the cloud. Backup to cloud Enter the "Menu" on the left and tap "Backup". Tap "Backup to cloud" and then tap "Yes". Then wait for the data download.
Operation of Smart Control (Smart Phone, Tablet PC) Select "Backup list on the cloud". Then backup records will appear. Tap "Record" to download data and recover data to local unit. (3) Settings User can set vibration, message alerts, gesture password (usable only after registration), etc. (4) Feedback User can feedback suggestions to back-stage management for maintenance and development. Tap "Feedback". Enter your suggestions and then submit it.
Explanation of Symbols Indicates a hazardous situation that, if not avoided, will result in death or serious injury. Indicates a hazardous situation that, if not avoided, could result in death or serious injury. Indicates a hazardous situation that, if not avoided, may result in minor or moderate injury. Indicates important but not hazard-related information, used to indicate risk of property damage. Indicates a hazard that would be assigned a signal word WARNING or CAUTION.
Precautions WARNING For the air conditioner with plug, the plug should be reachable after finishing installation. For the air conditioner without plug, an circuit break must be installed in the line. If you need to relocate the air conditioner to another place, only the qualified person can perform the work. Otherwise, it may cause personal injury or damage. Select a location which is out of reach for children and far away from animals or plants.If it is unavoidable, please add the fence for safety purpose.
Precautions FCC STATEMENT (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Precautions IC STATEMENT This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Precautions IC STATEMENT antennes utilisées pour cet émetteur doivent être installées et doivent fonctionner à au moins 20 cm de distance des utilisateurs et ne doivent pas être placées près d’autres antennes ou émetteurs ou fonctionner avec ceux-ci. Les installateurs doivent s’assurer qu’une distance de 20 cm sépare l’appareil (à l’exception du combiné) des utilisateurs. Working temperature range Maximum cooling Maximum heating Indoor side DB/WB(ć ) 26.7/19.4 26.7/- Outdoor side DB/WB(ć ) 46.1/23.9 23.
GREE ELECTRIC APPLIANCES, INC. OF ZHUHAI Add: West Jinji Rd, Qianshan, Zhuhai, Guangdong, China, 519070 Tel: (+86-756) 8522218 Fax: (+86-756) 8669426 E-mail: gree@gree.com.cn www.gree.
