@ BELL SOUTH CORDLESS SPEAKERPHONE 900MHz FILTERED SOUND™ WITH 40 CHANNEL AUTO SCAN Model MH9034 OWNER'S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS _ PLEASE READ THIS ( MANUAL CAREFULLY BEFORE USE. KEEP FOR YOUR REFERENCE. For Getting Started information, please see Installation Instructions on page 8 or your separate Quick Start guide.
Special Features proper care and adherence to the set-up and user instructions in this manual, this unit will provide you with years of trouble-free service. Bell South is committed to providing quality products that fit your needs. We would like to have any comments or suggestions you might have on this product. You may mail your comments to: U. 8.
2Hbio0s | VOLUME CONTROL {HE MID, LOW) SWITCH Pa REPARATION OUTHOUSE | | INT COM BUTTON 96 Pg. 6, 19,20 2 FLASH BUTTON IN BATHHOUSE. LOW 3 @ m= Fab INDICATOR @® Pg.6, BUTTON OCD oe &® © TONE BUTTON TTT Pg6 © @® SCAN BUTTON MEMO BUTTON Pg6 © © Pgs, 24 CHD For Getting Started Information, please see Installation Instructions on page 8 or your separate Quick Start guide.
TONE PULSE SELECT SWITCH 7 Pad INT COM BUTTON oe Pas INDICATOR Pas CHARGE MEMO BUTTON INDICATOR $5.8, 18 Pgs INTERCOM FLASH BUTTON INDICATOR Pgs Pgs, BELLYBUTTON { SPEAKERPHONE Pgs, 17,18 nee INDICATOR 18,20 TONE BUTTON for.
Contents Saetyinaiieions .. HANDSET Controls Location and Function Ease Gin Son's Location denunciation Getting Started Wall Mounting Asia Mounting... Turning the BASE UNIT RINGER ON/OFF ROCHA CS. Ss LE Placing Calls Redial Feats ey Storing Numbers on the BASE UNIT Recalling Stored Snifters front Mamore Intercom Recharge Battery Pack. Changing the Battery Pack Problematical uu Technical Information o.com cray FOC Requirements «ov.
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, always follow these basic safety precautions when using your cordless telephone equipment. Read and understand all instructions. Follow all warnings and instructions marked on the telephone. Unplug this telephone from the wall outlet before cleaning of replacing batteries. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. If necessary, use only a mild soap.
Safety Instructions F. If the telephone exhibits a distinct change in performance. 13. Avoid using a telephone {other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of the leak. 15. Never install telephone wiring during a lightning storm. 18. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 17.
Redial/Pause (RE/PA) Button: Press to redial the last number called. Press to insert a pause while dialing. . in Bathhouse Low Indicator: Lights up when the HANDSET is in TALK mode. Blinks when battery power is low. (See page 21 for details) . Talk Button: Press to answer an incoming call or to place a call. Press to end a call. Press twice to stop paging. . Memo Button: Press lo store phone numbers in memory or to call a number you have stored previously. . ANTENNA .
Power-In Connection Jack . Telephone Line Connection Jack . Ringer OFF Button: Press and hold down to disengage the BASE UNIT Ringer in the STANDBY mode. (See special features section) . Intercom Button: Press to begin intercom conversation of to page the HANDSET. Press again to stop. . Memo Button: Press to store phone numbers or to call a number you have stored. . Flash Button: Press to answer an incoming call if you have Call Waiting. .
Getting Started Connecting Your Phone This section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1. 1. Carefully remove your cordless telephone from its shipping carton. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase. 2.
Getting Started BASE UNIT BASE UNIT ANTENNA POWER SOURCE TELEPHONE TONE PULSE CONNECT THIN JACK SELECT SWITCH TELEPHONE LINE CAPACITOR — CORD TELEPHONE JACK 120V WALL OUTLET 3. Insert the small plug on the end of the AC ADAPTER into the POWER-IN connection jack on the back of the BASE UNIT. 4. Plug the AC ADAPTER into a 120V AG wall outlet. 5. Insert one plug of the TELEPHONE LINE FORD into the house TELEPHONE JACK and the other into the telephone line jack on the back of the BASE UNIT.
: ] ANTENNA LQ @ Press the button to confirm that you have a dial tone. If you do not get a dial tone, review steps 3 through 8. if you still have no dial tone, refer to the Problem Solving section on page 23. cQOBOO0 HANDSET i i 9. Before initial use, charge the HANDSET for 12 hours. You are now ready fo use your new Bell South Cordless Telephone.
Desk Mounting Desk Mounting One of the special features of your equipment is the unique design of the MOUNTING BRACKET which can hold your phone at an angle of 45° when desk mounting. There are two positions to choose from: 1. NORMAL POSITION (Mounting Bracket not required) For Normal Position, as shown in Figure 1, place the BASE UNIT on any desired but suitable location. FIGURE 1 2.
Wall Mounting Wall Mounting You may choose to put the BASE UNIT of your cordless telephone on a wall. 1. With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE LINE CORD to the telephone line jack. 2. Insert the top hooks of the MOUNTING BRACKET into the matching slots of the BASE UNIT {as shown below). Then push the bottom hooks of the MOUNTING BRACKET into place. Plug the free end of the SHORT TELEPHONE LINE CORD into the MODULAR WALL JACK. 3.
Cordless Telephone Operation Preparing for Use Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require recharging of the battery pack more often, 1. Place the HANDSET on the BASE UNIT for 12 hours. 2. After 12 hours, remove the HANDSET from the BASE UNIT. 3. RAISE THE ANTENNA FOR THE BEST RECEPTION. Before you can use your cordless telephone, you must charge the HANDSET for 12 hours.
REN Jo Re TIE Receiving Calls with the BASE UNIT 1. When the phone rings, press the button. The SP-PHONE indicator will fight up. 2. Start your conversation. 3. To end your conversation, press the button again. Receiving Calls with the HANDSET 1. When the phone rings, lift the HANDSET and press the (TALK) button. The BASE UNIT o IN USE indicator will light up. 5 2. Start your conversation. o 3. To end your conversation, either press the button or place the HANDSET on the BASE UNIT.
Placing Calls Using the HANDSET 1. Press the button. The BASE UNIT IN USE indicator will light Listen for a dial tone. nse GB = 3. Dial the phone number. hn 4. When finished with your call, press @ © the ( button again. The BASE @ GD UNIT IN USE indicator will turn off, @ ED Qe Using the BASE UNIT 1. Press the button, The SP-PHONE indicator will light up. 2. Listen for a dial tone. 3. Dial the phone number. 4. When finished with your call, press the button again. The SP-PHONE indicator will turn off.
Redial Feature HANDS T Redial Feature If you get a busy tone, press the button to hang up. 2. Press the button again. 8, Listen for a dial tone. 4. Press the button, This will automatically redial the last telephone number you called. 5. When finished with your call, press the { TALK) button again. The BASE UNIT IN USE indicator will turn off, BASE UNIT Redial Feature 1. If you get a busy tone, press the eho) button to hang up. 2. Press the (SP-PHD 3. Listen for a dial tone. 4, Press the button.
Storing Numbers Store Numbers on the BASE UNIT Press the (MEMO) button. Dial the number you want to store. . Press the button again. Press the keypad number (0-9) where you want to store that number, Write the name of the person you will be calling with that number next to the index number on the telephone number label. 101010§0 6. Repeat for other telephone numbers. EXAMPLE: To store the number 556-1212 under the index number 1 on the keypad: 4 Press 1 on the keypad. 1 Press the (F 2 Dial 555-1212. 5.
Intercom Intercom This feature allows conversations between the HANDSET and the BASE UNIT. Calling the BASE UNIT from the HANDSET 1. Press the {INT COM ) (intercom) button on the HANDSET. The BASE UNIT will ring. 2. Press the INTERCOM) (intercom) button on the BASE UNIT. 3. Begin conversation. 4. To end the conversation, press the HANDSET or on the BASE UNIT once. IM) button either on the Calling the HANDSET from the BASE UNIT 1. Press the (intercom) button on BASE UNIT. The HANDSET will ring. 2.
Intercom Transferring Calls This feature allows you to transfer a call from the HANDSET to the BASE : UNIT, or from the BASE UNIT to the HANDSET. Transferring calls from the HANDSET to the BASE UNIT 1. During a telephone conversation through the HANDSET, press the intercom) button on the HANDSET, the BASE UNIT will ring. 2. Press the (intercom) button on the BASE UNIT, the call is automatically placed on hold. An intercom conversation between the HANDSET and the BASE UNIT is now possible.
Security Security System Your cordless telephone uses a digital coding security system to prevent unauthorized use of your telephone line by another nearby cordless telephone. The system has its own identifying signal created by microcomputers in both the BASE UNIT and HANDSET. Security Code This telephone has an internal security code with 85,536 possible combinations. Each time you pick up the HANDSET, the code is randomly set to a new combination.
Recharging the Battery Pack Battery Type Use the following type and size battery pack: Cordless Telephone Battery Pack XY 3.6V, 600mAh & U.S. Electronics Inc. Ni-Cd Battery Pack: model B650 This battery pack is available through: U.S, Electronics Service Center 105 Madison Avenue New York, NY 10016 1-800-338-1694 Ni-Cd Recharging the Battery Pack The nickel cadmium (Ni-Cd) batteries in the HANDSET can be recharged many times using the built-in charger in the BASE UNIT.
| : Changing the Battery Pack Changing the Battery Pack The battery pack provides power for the HANDSET of your cordless telephone. To Replace the Battery Pack: 1. Remove the HANDSET battery compartment cover by sliding it down. 2. Pull out the battery connector and remove the battery pack. 3. Plug the new battery pack into the battery connector. 4. Slide the HANDSET battery compartment cover firmly into place in its closed position, 5, Before use, charge the new battery pack for 12 hours.
[2/0olo TT Rte ale] Problem Solving Section For your assistance, we have listed below a few common problems. Phone does nof work, check the following: 1. BASE UNIT is plugged into power source. 2. HANDSET is charged. 3. TONE/PULSE SWITCH is in the right position. 4, LINE CORD is plugged into the jack. Range of phone limited, check the following: 1. ANTENNA on BASE UNIT is raised. 2. BASE UNIT is centrally located in your residence. 3. BASE UNIT is not located near appliances.
Problem Solving Excess static, check the following: : 1. Check to see that the ANTENNA is not touching another metal object. 2. Raise the ANTENNA. If after pressing the TALK button, you receive three beeps and no dial tone, check the following: 1. Reset the HANDSET by placing it on the BASE UNIT for 2 to § seconds. NOTE: If no telephones in the house are working, disconnect one set at a time to verify that none of the phones are causing the problem.
Technical Information Technical Information This cordless telephone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect operation of your system. Noise Electrical pulse noise is present in most homes at one time or another. This noise is most intense during electrical storms.
| | FCC Requirements Federal Communications Commission Requirements This equipment complies with Part 68 of FCC Rules. A label on the BASE UNIT of this equipment contains, among other information, the FCG Registration Number and the Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company.
FCC Requirements Federal Communications Commission Requirements (continued) NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Warranty Warranty Information Bell South Products One-Year Limited Warranty This limited warranty sets forth all Bell South Products responsibilities regarding your product. There are no other expressed or implied warranties from Bell South Products. Warranty Service Provided if you purchased the telephone new from a retail vendor, Bell South Products warrants the telephone against defects in material and workmanship for a period of one {1} year from the original date of purchase.
Warranty What To Do for Warranty Service During the first thirty (30) days, a defective product is eligible for over-the counter exchange at the retailer from whom it was purchased. After thirty (30) days, the defective product should be returned to the authorized service center. Please allow a minimum of 3 weeks for the rectum of your product unless other instructions are provided by U. S. Electronics. The shipping address of the authorized service center is: 1.8.
This page serves as a template for attachment of screws to the wall when mounting this telephone on the wall. 1. Cut out this page. 2. Use this template to determine the distance between screws when mounting this phone on the wall. The two cross hairs identify where to attach the screws.
IMPORTANT In order to get maxim urn life from the HANDSET battery pack, be sure to charge the HANDSET for 12 hours before initial use. IMPORTANT Placing your BASE UNIT near appliances such as televisions, refrigerators, radios, or microwave ovens may cause interference. IMPORTANT When you hear interference, press the SCAN button to change the operating channel. IMPORTANT The AC ADAPTER must always be plugged into an electrical outlet.