User Manual

ManualsBrandsGreat Well Electronic ManualsElectronicsBluetooth GPS Receiver

User guide

1. power on (pairing ):

1. 1 long press the power bottom 3S until the Blue led is on .

1.2 the BTGPS will turn off, if the BTGPS don’t paired in 5 minute,

2. paired the BTGPS using the Bluetooth host device(for example: PDA,Moble

phone,netbook with bluetooth);

3. open the navigation soft in the Bluetooth host device;

4. place the BTGPS at the open sky(NO fix:green led flash 1s/times,fix :green led

on)

5. low battery voltage warning :Red led on;the BTGPS will turned off ,if don’t

charge the BTGPS in 15minute;

power off:long press the power bottom 1s;

Summary of content (6 pages)

PAGE 1
User guide 1. power on (pairing ): 1. 1 long press the power bottom 3S until the Blue led is on . 1.2 the BTGPS will turn off, if the BTGPS don’t paired in 5 minute, 2. paired the BTGPS using the Bluetooth host device(for example: PDA,Moble phone,netbook with bluetooth); 3. open the navigation soft in the Bluetooth host device; 4. place the BTGPS at the open sky(NO fix:green led flash 1s/times,fix :green led on) 5.
PAGE 2
Product Description: 1.Product Name 2.Product Features BT-GPS-005(StarIII) BT-GPS-009(StarIII) • Ultra slim design (12mm thickness). • Adopt high sensitivity SiRF Star III GSC3 chipset up to 9 hours or Star II GSC2X chipset with X-trac (available from SIRF from September 2006) up to 12 hours. • A-GPS Supported. • Easy to link with any Bluetooth capable mobile phones with Bluetooth 1.2compliant. • 20 channel GPS Receiver for fast acquisition and reacquisition （StarIII）.
PAGE 3
Acquisition Time Cold start 42 sec (10 sec with A-GPS) Warm start 35 sec (5 sec with A-GPS) Hot start 1 sec Update rate 1 HZ (max) GPS Accuracy Position RMS: approx. 5m Sensitivity Acquisition -155dBm Tracking -159dBm Dynamics Altitude Max. 18,000 m Velocity Max.
PAGE 4
Buffer Satellite Positions Cold start –if BT-GPS has been significantly moved since it was last switched on (>1000km) and the last switch on was more than 6 months, then it may be to perform a cold start. Warm start - since our buffer backup rechargeable lithium-polymer battery, significantly moved since it was last last switch on was less than 6 months, start always.
PAGE 5
Temperature Operating 5%-95% RH, non condensing Humidity Bluetooth Specification Bluetooth Version 1.2 compliant BluetoothTM Class2 operation (up to 10 meter range) RF frequency: 2.4GHZ-2.48GHZ ISM Band Modulation: FHSS / GFSK RF channels: 79 RF Input Sensitivity: -80 dBm RF Output level: -6dBm----4 dBm 5.Bluetooth PIN Code None(on some mobile phones, 0000 must be entered) 6.Bluetooth Device ID GW-BTGPS009 7.
PAGE 6
Caution: The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the use’s authority to operate this equipment. Notes :This equipment has been tested and found to comply with the limits for a Class B digital device ,pursuant to part 15 of the FCC Rules.