Instructions / Assembly

MODELS: RR100SB &RR100LB

READ ALL INSTRUCTIONS BEFORE INSTALLING RUGGED RAILS.

Instructions for Installation and Use:

Fig. 1

Fig. 2

Contents: See Fig. 1

2ea. Rugged Rails, 4ea. ¼” x 1-1/4”

Bolts, 4ea. ¼” Locknuts, 8ea. Flat

washers, 4ea. ¼” x 1-1/4” Lag Screws

Select desired location on sides of

truck bed. Mark selected holes with a

short pencil for drilling. See Fig. 2

PAGE 1
MODELS: RR100SB &RR100LB READ ALL INSTRUCTIONS BEFORE INSTALLING RUGGED RAILS. Instructions for Installation and Use: Contents: See Fig. 1 2ea. Rugged Rails, 4ea. ¼” x 1-1/4” Bolts, 4ea. ¼” Locknuts, 8ea. Flat washers, 4ea. ¼” x 1-1/4” Lag Screws Fig. 1 Select desired location on sides of truck bed. Mark selected holes with a short pencil for drilling. See Fig. 2 Fig.
PAGE 2
Once holes are marked and before drilling, feel under truck bed top to check for clearance. If clearance is available, holes should be drilled with a ¼” drill bit and the ¼” 1-1/4” bolts with flat washers and locknuts will be used. If there is no clearance available, holes should be drilled with 1/8” drill bit. This will allow rails to be attached to truck using the ¼” lag screws and flat washers provided. See Fig. 3 Fig.3 Remove rails and drill appropriate size holes for suitable method of attachment.