Start Using Only for Mirror Screen function machine For Android phones 1.For Android System (wireless connection) To activate this function, your android device must support Multi-Screen/Wireless display. Names may differ from different devices. Turn on the projector, select Screen Mirroring as the Input Source, then choose Android on the projector interface of Screen Mirroring for Android System. Turn on the Wi-Fi Switch in your Android device.
Start Using Only for Mirror Screen function machine 2.For Android System (wired connection) Turn on the projector, select Screen Mirroring as the input source, then choose iPhone on the projector interface of Screen Mirroring for Android System. Go to the settings of your mobile device, find Developer options and turn on USB Debugging. The steps to turn on Developer options vary from different models of Android device. You may check it from Internet or contact us for the detailed steps.
Start Using Only for Mirror Screen function machine For iPhone phones 1.For iOS system Setting with cellular data (wireless connection) Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for iOS system. Go to the settings of your iOS mobile device and connect it to the Wi-Fi of RKcast-XXXXXX (password: 12345678). Please ignore the exclamation mark before it.
Start Using Only for Mirror Screen function machine Select RKcast-XXXXXX from the searching results to connect The display of your iOS mobile device will be projected to the wall/screen via cellular data after a successful connection.
Start Using Only for Mirror Screen function machine The live streaming content from your iOS mobile device will be projected to the wall/screen through Wi-Fi connection.If you'd like to connect to another router's Wi-Fi, please repeat the procedures mentioned in the section of Streaming with your router's Wi-Fi. 2.For iOS System Screen Mirroring with the USB Cable (wired connection) Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for iOS System.
Start Using Wi-Fi Connection only for Android Version (Luna X) Power ON the projector & you will see the home page as shown in the images (right side) • Go to Settings option ( check picture ) Go to Network options then click & enter Turn ON the Wi-Fi & search for theavailable Wi-Fi networks & get connected • For Bluetooth connection, go to settings option then click on Bluetooth Icon & turn ON the Bluetooth and search for the available other Bluetooth devices in 10 Meters of range and get connected •