User Manual

Gravity
®
is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: [phone] | adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you
start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety
warnings or other information from the equipment.
5. Be attentive when setting up the product and protect
yourself from injury.
6. This product is intended for indoor use only. Using it
outdoors could lead to product failure and personal
injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your
country. During disposal of packaging, please
separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction
or any warnings, please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF
LIABILITY
You can find our current warranty conditions and
limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFAC-
TURERS-DECLARATIONS_GRAVITY.pdf
To request warranty service for a product, please contact
Adam Hall GmbH, Adam-Hall-Str. 1, 61267 Neu Anspach /
E-mail [e-mail] /+49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
( WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European
countries with waste separation)
This symbol on the product, or the documents accompa-
nying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environ-
mental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately
from other waste and have it recycled to promote sustain-
able economic activity.
MS U CLMP
UNIVERSAL MICROPHONE CLAMP
FOR HANDHELD MICROPHONES
FEATURES
• Clamping range from 14 – 42 mm
• Set screw for adjusting the angle
• Strong clamping force
• EVA padded grip
• Suitable for both round and conical microphones
DESCRIPTION
Show starts in an hour, people are waiting, you are
setting the stage and you feel the pressure because
you just can’t find that right clamp. The search is over!
With the MS U CLMP you have a clamp that fits any
microphone.
It’s clamping range of 14 – 42 mm will hold any micro-
phone in your collection, both round or conical. It will
also make sure not to scratch your microphones due
to the EVA padded grip.
With a Gravity MS U CLMP, you have an all-purpose
solution for attaching any hand-held microphone.
SPECIFICATIONS
Product number GMSUCLMP
Product type Microphone accessories
Type Microphone clip
Material ABS plastic
Threaded connector 5/8"
Microphone mount
(diameter)
14 – 42 mm
Joint Screw-on
Features
3/8" adapter for microphone
stands
Black ring pack included Yes
Weight 0.082 kg