User's Manual

ManualsBrandsGRAUPNER ManualsElectronicsComputer System Graupner HoTT

mz-8 HoTT

◎ GRAUPNER

8th F, 202 Dong, Chunui Techno-Park II, 202,Chunui-

Dong, Wonmi-Gu,

Bucheon-Si, Gyeonggi-do, SOUTH KOREA.

TEL: 070-7863-3675 FAX : 070-7863-3670

E-mail: service@openhobby.com

FUNCTION

Main function and Channel

Basic 4 Channels and added 6 Channels.

6 Channel is as below.

① LED : ON / OFF

-> CH8 1100us / 1900us

② SPEED : Attitude mode / Rate mode

-> CH5 1100us / 1900us

③ SNAP : Taking pictures

-> CH9 1100us (1500us nothing)

④ RECORD : Film movies

-> CH9 1900us

⑤ FLIP : Use the button on top left of image (360° FLIP)

-> CH10 1100us / 1900us

now channel 10, later channel 7, (Alpha 150 not active

in autopilot mode as soon as GPS is connected it will be

channel 6 coming home function)

⑥ 3D / EASY : Use the button on top right of image

(180° revolution and additional function)

-> CH6 1100us / 1900us

CH6, when AKRO3D is adjusted in the receiver, for

normal flight mode with GPS (Alpha 150) it will be

autopilot function

⑦ 2.4GHz Quad with 6-Axis Gyro

⑧

You can attach camera and video module by

choosing option. You can take a video on the radio

using Photo & Video button.

mz-8

Frequency band

2400MHz ~2483.5 MHz

Modulation

FHSS

Transmission output

about 1mW

Temperature range

-10 … +55 ℃

Antenna

Monopole Antenna

Battery

AA Size x 3 pcs

Operating voltage

3.6 … 4.8V

Output voltage

about 50mA

Dimension

151 x 134 x 63.7 mm

Weight

about 260g (Incl. battery)

Summary of content (6 pages)

PAGE 1
P1 mz-8 HoTT ◎ GRAUPNER 8th F, 202 Dong, Chunui Techno-Park II, 202,ChunuiDong, Wonmi-Gu, ⑦ 2.4GHz Quad with 6-Axis Gyro Bucheon-Si, Gyeonggi-do, SOUTH KOREA. ⑧ You can attach camera and video module by TEL: 070-7863-3675 FAX : 070-7863-3670 choosing option. You can take a video on the radio E-mail: service@openhobby.com using Photo & Video button. mz-8 FUNCTION Frequency band 2400MHz ~2483.
PAGE 2
P2 Transmitter manual Operating transmitter - Power on : Pull Slide switch up - Power off : Pull Slide switch down 1) Flip Function 3D function is for 180 degrees flight. To operate, use If you push Flip button, buzzer will ring with 0.5 seconds same function with Flip. intervals. 3) Attitude Function To rotate a full 360 degrees, push Flip button and when When you push Function button, one short sound rings.
PAGE 3
P3 LED Function Status Discription Bind status (No Red LED Green LED Buzzer blinking (1s) low beep(1) Bind Success, on low beep(2) RX receive OK on Range Test fast blinking bind) Bind range < LED arrangement of transmitter > low beep(2) /2sec 1) LIGHT ON / OFF Function Low Voltage Yellow Led ① When the lights are off, LED stay OFF condition. fast blinking /2sec High beep(3) Sensor Warring ② When the lights are on, LED stay ON condition.
PAGE 4
P4 Program Mode (workable only at Binding condition) Normal Mode (1) Condition of Basic Operation Enter to Program mode : Press two Stick Switch simultaneously for 2sec. (1) Basic Operation - When Power on, the last used memory will be bound to Release Program mode : Press two Stick Switch simultaneously for a second. Receiver. - In case of No Receiver connection, if you press the button of left stick for 1sec, it will search Receiver.
PAGE 5
P5 How to do Stick Calibration -Reverse mode : Green LED will be blinked twice per a (1) Enter to Stick Calibration Mode second interval. Turn On the Radio, in state of pressing left stick switch. If enter to Mode, RED LED will blink 3 times.
PAGE 6
• P6 안전규격 (1) KC 인증 Graupner mz-8 Transmitter KCC인증번호: MSIP-CRM-sjr-16006700 ◎ Notes on environmental protection This symbol on the product, user manual or packaging indicates that this product must not be disposed of with (2) Conformite Europeenne Product(s): Graupner other household waste at the end of its mz-8 Transmitter, life. It must be handed over to the applicable collection point for the recycling of electrical and electronic equipment.