GR-8 HoTT 2.
• Warranty regulation Refer the WARRANTY CARD in a Package OPENHOBBY A/S CENTER 202 Dong- 201, Chunui Techno-Park II, 18, 198 street, Bucheon-ro, Wonmi-Gu, Bucheon-Shi, Gyungki-Do KOREA 420-857 Phone: 82-70-7863-3674 Fax: 82-70-7863-3670 Customer Service E-mail: service@openhobby.com BOX CONTENTS GR-8 HoTT Receiver Manual Warranty Card Temperature/Voltage Sensor (S8362) WARNING NOTES • Never operate your car or truck in a crowded street with traffic.
Use only genuine and matching Graupner/SJ connectors and accessory parts. • Make sure whenever you start connecting and operating the controller, that your transmitter is switched on, and has the throttle set to position “STOP”. Binding & RF Range Test BIND Press and hold Bind button for 3 sec while your receiver is powered on and then LED indicator is off. Now press Bind button of your transmitter and then receiver’s LED indicator is off.
1) Port 1, 2, 3, 4 should be connected to servo or ESC. 2) Port 5 supports low voltage warning alarm with beep and LED indicator. In addition, it is available to use with telemetry sensor. When using receiver battery (Nixx 4~5 cell, LiPo 2 cell), it needs to be connected to Port3. As for low voltage warning alarm, the default value is 3.7V.
• ENVIRONMENTAL PROTECTION NOTES
This product must not be disposed of with other waste. Instead, it is the user’s responsibility to their waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.