The information in this document is subject to change without notice. This document contains materials protected by copyright. All rights are reserved. No part of this manual may be reproduced or transmitted in any form, by any means or for purpose without express written consent. Federal Communications Radio Frequency Interference Statement. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules.
CONTENTS Chapter 1 Welcome to Grand RF Grabber USB Features 1.
Chapter 1 Welcome to Grand RF Grabber USB (2.4GHz Wireless Audio/Video Transmitter & Receiver with USB Video Capture ) 1.1 Introduction The Grand RF Grabber USB is a Wireless Audio & Video transmitter and receiver that delivers amazingly clear audio and video up to 100 meters in open areas.
cable to your PC. ISM Band: Audio/Video on four delectable channels, Full Range: EIA, CIR, SCENT, PAL Built-in PLL circuit 1.3 Specification: ® ISM Band: 2400Mhz ~2483Mhz Audio/Video on four delectable channels, CH1=2410MHz, CH2=2430MHz, ® Antenna Mode: Dipole. ® Demodulation Method: FM. ® Frequency Generating: Video Output: 1Vpp/ 75 ohm Composite Video. ® RF Output Power: Follow the regulation. Transmitter: USB Receiver: .
1.
Chapter 2 Installation 2.1 Install the Grand RF Grabber USB Insert the supplied driver disk to your Floppy device. 1. Connect the supplied power adapter (DC 6V, 800mA) to both Transmitter & Receiver & then set up the channel (4 delectable channels). 2.
3. The Windows automatically detect as “USB composite device” and pop up the “Add new hardware wizard”. and click Next button. 4. NOTE : There are 3 devices must be installed. There are [USB Composite Device] ~ [Zorn USB Live! Pro Audio Device] & [Zorn USB Live! Pro Device) . 5S. Check the “Search for the best driver for your then click the Next button.
6. Check the “Specify the location” > and type A:\ to specify the device driver location. Add New Hardware Wizard 7. Please click Next to continue.
8. Please click Finish to complete Setup. shed installing the software that you news requires. Shr n 9. Using the same way to install the driver for both “Zorn USB Live! Pro Audio device” & “Zorn USB Live! Pro device”.
Chapter 3 Technical Support When you need RMA or advanced technical service, please fill in this form as detailed as possible and FAX to your dealer or service representative, Product S/N: Product Name: TEL No. FAX No.: E-mail address: Full Address: Hardware condition: Ma inboard chip set: Ma inboard CPU: CPU clock: MHz Main memory: MB Cache memory: KB VGA card: Display memory: MB Sound card: Hard Disk: MB Other add-on cards: Monitor: Horizontal Freq.: KHz to KHz Vertical Freq.