Grandstream Networks, Inc. GXV3500 User Manual VoIPon www.voipon.co.uk sales@voipon.co.
GXV3500 Digital Video Encoder/Decoder Safety Instructions These instructions are intended to assist users with the operation of the GXV3500 and also to instruct on how to avoid dangerous situations or damage to the device. Warnings: Serious injury or death may be caused if any of the warnings below are neglected. Cautions: Injury or damage to the equipment may occur if any of the following caution messages are neglected. Warnings Follow these safeguards to prevent serious injury or death.
GXV3500 Digital Video Encoder/Decoder Contents Welcome .........................................................................................................................................................4 Package Contents ............................................................................................................................................5 Product Overview .............................................................................................................................
GXV3500 Digital Video Encoder/Decoder Welcome The GXV3500 is a powerful, next generation digital video surveillance encoder/decoder. The GXV3500 provides an easy to manage multi camera IP solution. The GXV3500 combines cutting-edge technology, including: support for SIP, H.264 BP, 2way audio, and PoE, for best-in-class scalability, ease of integration and security. The unique incorporation of TCP/IP protocols creates sophisticated, flexible networking and remote control abilities.
GXV3500 Digital Video Encoder/Decoder Package Contents Items in the GXV3500 package: GXV3500 – 1-channel digital video encoder/decoder 12V DC power Adapter 3.5mm to RCA audio/video cable Quick installation guide Firmware 1.0.1.38 Grandstream Networks, Inc. Page 5 of 32 08/2011 VoIPon www.voipon.co.uk sales@voipon.co.
GXV3500 Digital Video Encoder/Decoder Product Overview GXV3500 Front Panel 1 V_IN – 1 BNC (Voltage: 1.0V p-p, Resistance 75Ω) port for video input 2 MIC IN – 3.5mm port for audio input devices, ie. Microphones 3 RESET - Press the Reset button for 15 seconds to perform a factory reset. GXV3500 Back panel 1 DC 12V – 12V DC power port; insert the positive bare wire here (+12VDC), insert the negative bare wire into the GND port. 2 NETWORK – 10/100 Switch LAN port for connecting to Ethernet.
GXV3500 Digital Video Encoder/Decoder GXV3500 Sample Connection Diagram Firmware 1.0.1.38 Grandstream Networks, Inc. Page 7 of 32 08/2011 VoIPon www.voipon.co.uk sales@voipon.co.
GXV3500 Digital Video Encoder/Decoder GXV3500Key Features The table below lists the key features the GXV3500 Supports. Feature GXV3500 Channels 1 H.264 BP @Level 3.
GXV3500 Digital Video Encoder/Decoder Compliance FCC Part15, Subpart B Class B; EN 55022 Class B, EN61000-3-2, EN61000-3-3, EN 55024, EN60950-1; C-tick AS/NZS CISPR 22, CISPR 24 Installation Guide Minimum Recommended System Requirement Windows 2000 Server Professional, Windows XP, Windows Vista. CPU: Intel Pentium 4 or higher, 2 GHz. RAM: 1 GB (4 GB recommended for larger systems). Support for DirectX 8.0 and above. .
GXV3500 Digital Video Encoder/Decoder Configuring the GXV3500 via Web Browser The GXV3500‟s embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow you to configure your IP encoder/decoder through Microsoft Internet Explorer. Connect the Device to a DHCP server. 1. Navigate your browser to: http://www.grandstream.com/support/gxv_series_surveillance/general/resources/gs_ search.zip 2. Run the Grandstream GS_Search tool, that you just downloaded.
GXV3500 Digital Video Encoder/Decoder Connect to the Device Using a Static IP. If the device does not get a response from the DHCP server after 3 minutes, it can be accessed by the default IP 192.168.1.168. 1. Connect your PC to the same network as the GXV3500. 2. Configure the IP address of your PC to: 192.168.1.XXX (1
GXV3500 Digital Video Encoder/Decoder GXV3500 Encoder Web Page Items on GXV3500 Home Page 1 2 Control Console Motion Detection 3 Alarm Event 4 Default 5 6 7 8 9 10 11 12 ZOOM FOCUS SPEED BRIGHTNESS CONTRAST SATURATION Play Capture 13 Record 14 15 Talk Sound Off/On PTZ Console controller. PTZ device needs to be connected. If the motion detection alarm is triggered, the indicator of the corresponding channel will flash red. Click on the indicator to turn off the alarm.
GXV3500 Digital Video Encoder/Decoder 16 17 Playback Config 18 19 Language Decode Replays the saved video. Configures the Save Location for captured images and recorded videos. Selects between English or Chinese as the display language Sets up the device as a decoder after reboot. GXV3500 Basic Settings GXV 3500 System Page This page allows you to configure the system settings on the IP camera. Current System Time - displays the current date and time (24h clock).
GXV3500 Digital Video Encoder/Decoder DI and DO - Digital input and digital output Normal open: the circuit is by default open unless an event triggers the device to close the circuit. Normal close: the circuit is by default closed unless an event triggers the device to open the circuit GXV3500 Video & Audio Page On Screen Display (OSD) Settings OSD Time/ Text – The time stamp and channel name displayed on the screen. Video Settings Preferred Video Codec – The GXV3500 supports the H.
GXV3500 Digital Video Encoder/Decoder NOTE: The users might need to configure the Primary Stream and Secondary Stream properly. Sometimes, the user might like to watch the live video stream from the web GUI in low resolution mode while recording a copy in high resolution mode due to the limitation of internet bandwidth. In this case, for example, primary stream can be configured to have better resolution, and then the users can use primary stream to record while watching secondary video streams.
GXV3500 Digital Video Encoder/Decoder Gateway IP address, DNS Server 1 (primary), DNS Server 2 (secondary). These fields are set to zero by default. Static IP addresses are recommended for the GXV3500 DNS Configuration There are two methods of DNS configuration on the GXV3500: 1. The GXV3500 can obtain the DNS server automatically 2. Users can configure their own preferred DNS server HTTP Port The GXV3500 supports user configured http ports.
GXV3500 Digital Video Encoder/Decoder ISP Type. Site Name – The DDNS name for your device. DDNS Account/ DDNS Password – The account and password from the DDNS Provider. STUN Server – If the device is behind a router, a STUN server is needed to help penetrate the NAT. 4. Click Save to save the changes. You might need to reboot the device to apply all the changes.
GXV3500 Digital Video Encoder/Decoder 5. Authenticate ID – The SIP service subscriber‟s Authenticate ID used for authentication. It can be identical to or different from the SIP User ID. Authenticate Password – The SIP service subscriber‟s account password for the GXV to register to the SIP server of the ITSP. STUN Server – If the device is behind a router, a STUN server is needed to help penetrate the NAT. Stream – Choose between Primary and Secondary stream.
GXV3500 Digital Video Encoder/Decoder NOTE: With current firmware, only the first phone number in the list will be called when an alarm is triggered. Status Page The Status Page lists hardware and software information, for example, the part number, the software version, about the GXV3500. Hardware Version – This field contains the product‟s hardware information. Part Number – This field contains the product‟s part number information. Bootloader Version – Bootloader code version number.
GXV3500 Digital Video Encoder/Decoder Camera Type This section shows the Lens information of GXV3500. The Lens type information contains the brand name, the size of image sensor, the resolution and so on. GXV3500 User Management Page All current users will be list in the User List section of this page. You can also add and remove users here. Existing User Name –The field lists all of the current users. You can insert or remove users from the list by click on the Add or Update or Delete button.
GXV3500 Digital Video Encoder/Decoder firmware files). Config Server Path - The IP address or domain name of the configuration server (the location of the XML configuration files). XML Config File Password – The password used to authenticate the XML file. Automatic Upgrade Interval – Enter the frequency (in minutes) in which the HTTP/HTTPS/TFTP server will be checked for new firmware upgrades or configuration changes. Automatic Upgrade – The default setting is “No.” Choose “Yes” to enable automatic.
GXV3500 Digital Video Encoder/Decoder configured. User Name/ Password – The user name and password required to log in to your SMTP server, for example, 123@gmail.com/123. SSL – Checked if the SMTP server requires a secure connection. Test Email Account Settings – Click the Test button to send a test email from the From E-Mail to the To E-Mail to make sure that SMTP is configured properly. If the receiver can get the test email, then the SMTP settings are ready to go.
GXV3500 Digital Video Encoder/Decoder Connect a PTZ device to the GXV3500 1. Connect the PTZ device to GXV3500 by using the RS-485 port. Connect the A pin to the positive cable of the PTZ device. Connect the B pin to the negative cable of the PTZ device. The PTZ device has its own power 2. Click Advanced Settings > PTZ; in PTZ page, configure the PTZ Protocol and Baudrate according to your connected PTZ device. 3. Click Save and reboot the device to apply all changes. 4.
GXV3500 Digital Video Encoder/Decoder Connect Alarm Input Equipment to the GXV3500 Here are two sample connection diagrams. Connect the alarm equipment to the GXV3500 by following the diagram below. Set up Alarm Actions An alarm action is what the GXV3500 is going to do when an alarm is triggered during the defined time period – the time schedule. The GXV3500 allows multiple alarm actions. Record Video – If this option is selected, the GXV3500 will record the video when an alarm is triggered.
GXV3500 Digital Video Encoder/Decoder the alarm is triggered. Dropdown list for date Available time schedules To add a schedule, select the date from the dropdown list, Start Time and End time and Click Add to add a new time schedule. To delete a schedule, check the schedule you would like to remove and click Delete. How to connect an Alarm Output Equipment to GXV3500 Here is a sample connection diagram. Connect the alarm output equipment to the GXV3500 by following the diagram below. Firmware 1.0.1.
GXV3500 Digital Video Encoder/Decoder GXV3500 Motion Detection The GXV3500 supports Motion Detection. To utilize this feature, please follow the below steps: 1. Setup the motion detection monitored area. 2. Configure the motion detection time schedule. 3. Configure alarm action properly. Setup Motion Detection Monitored Area Enable Motion Detection – If this option is selected, motion detection will be enabled. If something/somebody moves in the motion detection region, an alarm will be triggered.
GXV3500 Digital Video Encoder/Decoder Configure Motion Detection Time Schedule & Alarm Actions This section allows you to configure the time during which the IP camera will monitor the motion detection. The IP camera not only can monitor your settings but also can take actions when the alarm is triggered. Monitored region Dropdown list for date Available time schedules IP camera System Log This page is used to set up the system log server path and system log level.
GXV3500 Digital Video Encoder/Decoder GXV3500 Decoder Home Page When the device is configured as a decoder it can receive the video and audio signal through RTSP from up to 8 cameras in the network. The device will output the video and audio signal from these cameras through its AV out port. This is an analog output and can be connected to any monitor or TV that can receive a analog input (yellow, red, white).
GXV3500 Digital Video Encoder/Decoder 4 Patrol 5 6 7 8 9 10 11 Host Address Port Channel User Name Password Description Time screen according to its patrol time.
GXV3500 Digital Video Encoder/Decoder A 4: Contact the administrator of the device for more information. 5. The GXV3500 web configuration page is not displayed correctly in Internet Explorer 8? In IE8, Compatibility View might need to be enabled for the GXV3500 web configuration page to load properly. To enable compatibility view, open IE8, click Tools>Compatibility View Setting, and add the GXV3500 web configuration pages to the Compatibility View. 6.
GXV3500 Digital Video Encoder/Decoder 12. It is recommended that you save your video files in different directories when using GSurf and GS_NVR. GSurf and GS_NVR are different programs that have the ability to delete recorded video files. It is better to save video files in different directories when using GSurf and GS_NVR in the event that they automatically delete files that you might want to keep. 13.
GXV3500 Digital Video Encoder/Decoder VIA/S3G UniChrome Pro IGP Works normally NIVDIA Geforce 7300GS SiS 661FX SiS Mirage Graphics SiS 661 Series Intel(R) G33/G31 Express SiS Mirage3 Graphics SiS 661FX/GX Mirage Graphics S3 Graphics ProSavageDDR(Microsoft Corporation) XGI Velari Z7/Z9/Z9S V1.08.12 Works normally Works normally Works normally Works normally Works normally Works normally Works normally Works normally There is some delay when playing videos.
