Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215 USA Voice: (617) 566-9300 Fax: (617) 249-1987 www.grandstream.com In all EU member states, operation of 5150 - 5350 MHz is restricted to indoor use only. GRP2615 Carrier-Grade HD IP Phone For Warranty and RMA information, please visit www.grandstream.
Content English...............................................................................1 简体中文..........................................................................6 Español............................................................................11 Français...........................................................................16 Deutsch............................................................................21 Italiano......................................................................
PRECAUTIONS: EN The GRP2615 is not pre-configured to support or carry emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is Your responsibility to purchase SIP-compliant Internet telephone service, properly configure the GRP2615 to use that service, and periodically test Your configuration to confirm that it works as You expect.
PHONE SETUP: Wall mount Slot for the wall mount spacers and phone stand Kensington Lock USB Port PC Port LAN Port CONNECTING THE PHONE: To setup the GRP2615, follow the steps below: 1. Connect the handset and main phone case with the phone cord. Headset Port Phone Stand 3. Network connection is possible via two methods which are described below: Handset Port • Power Installing the phone (Wall Mount *sold separately): 1.
PHONE CONFIGURATION: Configure the GRP2615 using a Web Browser: 1. Ensure your phone is powered up and connected to the Internet. 2. Press and hold the “UP” button for 3 seconds to see the IP address. 3. Type the phone’s IP address in your PC browser. 4. Enter admin’s username and password to access the configuration menu. (The factory default username is “admin” while the default random password can be found on the sticker at the back of the unit). Configure the GRP2615 using the Keypad: 1.
安装电话: 注意事项: 警告: 请不要在设备启动未完成或设备升级软件时断开电源,因为如刚才 所述的操作会导致话机本身的程序损坏,进而导致设备无法启动。 墙体支架槽与桌 面 支架槽 警告: 请使用设备包装中的电源,因为使用其他没有经过认证的替代电源 适配器有可能对设备造成损害。 肯辛顿锁孔 墙体支架配件 耳机 手柄 USB端口 产品概览: GRP2615是下一代企业级IP电话,具有10个双色线路键(最多可被编辑 为40个可配置的BLF键或快速拨号键),4.3英寸(480x272)TFT彩色 LCD显示屏,5个可编辑应用程序软按键,1000M网络端口,集成PoE, 支持Wi-Fi和蓝牙,三方会议和EHS功能。 GRP2615可提供卓越的高清 PC连接端口 网络连接端口 桌面支架 12V电源 安装电话 (墙体支架配件*分开出售): 1. 将墙体支架插入电话背面的支架插槽中; 音频质量,丰富的前沿电话功能,隐私保护,以及与大多数第三方SIP设 2. 通过墙孔将电话固定在墙上; 备和领先的SIP / NGN / IMS平台的广泛兼容性。 对于寻求高品质、多功 3.
电话的连接: 电话的配置: 连线步骤: 通过WEB浏览器配置GRP2615: 1. 用手柄连线连接电话手柄和电话主机; 1. 请确保电话的电源及网络连接; 2. 用电源适配器连接电话电源接口和交流电源插座; 2. 按住“向上”按钮3秒钟以查看IP地址 3. 可以通过以下描述的两种方法进行网络连接。 • 通过Ethernet: 3. 在您电脑浏览器中输入话机IP地址(电话和您的电脑必须在同一个网 段); - 用网线连接电话的网络接口和外部网络接口(如:集线器或交换机 上的RJ-45网 络接口); 4. 输 入 管 理 员 账 号 及 密 码 , 进 入 配 置 页 面 。 ( 出 厂 默 认 用 户 名 为”admin”, 出场默认随机密码可以在设备背后的贴纸上找到)。 • 通过LCD菜单配置WiFi: - 按下菜单/确定按键进入菜单选项,选择“系统→网络→WiFi设置” 并启用WiFi - 选择“扫描”,LCD将弹出对话框提示“WiFi正在扫描中……….” - 扫描结束后,WiFi列表将显示出来,选择可使用的并输入正常的密 码即可。 4.
PRECAUCIONES: ES El GRP2615 no esta pre-configurado para soportar o realizar llamadas de emergencia a ningún tipo de hospital, agencia policial, unidad de cuidado medico o cualquier otro servicio de emergencia. Es su responsabilidad contratar un servicio de telefonía de Internet compatible con el protocolo SIP, configurar el GRP2615 para utilizar dicho servicio y periódicamente probar esta configuración para confirmar que este trabajando como usted espera.
INSTALACIÓN DEL TELÉFONO: Ranuras para soporte y montura de pared Montura de Pared CONECTANDO EL TELÉFONO: Para configurar el GRP2615, siga los pasos detallados abajo: 1. Conecte el auricular a la unidad utilizando el cable telefónico. Puerto de Receptor de Cabeza Soporte de Puerto Auricular Teléfono Kensington Lock Puerto USB Puerto PC Puerto LAN Alimentación 1. Inserte la montura de pared en la ranura de atrás del teléfono 2. Coloque el teléfono en la pared utilizando los orificios 3.
CONFIGURACIÓN DEL TELÉFONO: Configurando el GRP2615 utilizando un navegador web: 1. Asegure que su teléfono este conectado a la red y tenga electricidad 2. Presione y mantenga el botón “Arriba” por 3 seg. Para ver la dirección IP 3. Escriba la dirección IP en su navegador web (Ver la figura en la página siguiente) 4. Ingrese como administrador para ver el menú de configuración. (El usuario es “admin” y la contraseña aleatoria debería estar en la etiqueta en la parte trasera de la unidad).