Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215 USA Voice: (617) 566-9300 Fax: (617) 249-1987 www.grandstream.com GRP2613 Carrier-Grade HD IP Phone For Warranty and RMA information, please visit www.grandstream.
Content English...............................................................................1 简体中文..........................................................................6 Español............................................................................11 Français...........................................................................16 Deutsch............................................................................21 Italiano......................................................................
EN PRECAUTIONS: The GRP2613 is not pre-configured to support or carry emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is Your responsibility to purchase SIP-compliant Internet telephone service, properly configure the GRP2613 to use that service, and periodically test your configuration to confirm that it works as You expect.
CONNECTING THE PHONE: PHONE SETUP: Slot for the wall mount spacers and phone stand Wall mount Kensington Lock Phone Stand Headset Port Handset Port PC Port Power LAN Port Installing the phone (Wall Mount *sold separately): 1. Attach the wall mount spacers to the slot for wall mount spacers on the back of the phone. 2. Attach the phone to the wall via the wall mount hole. 3. Pull out the tab from the handset cradle (See figure below). 4.
PHONE CONFIGURATION: Configure the GRP2613 using a Web Browser: 1. Ensure your phone is powered up and connected to the Internet. 2. Press and hold the “UP” button for 3 seconds to see the IP address. 3. Type the phone’s IP address in your PC browser. 4. Enter admin’s username and password to access the configuration menu. (The factory default username is “admin” while the default random password can be found on the sticker at the back of the unit). Configure the GRP2613 using the Keypad: 1.
安装电话: 注意事项: 警告:请不要在设备启动未完成或设备升级软件时断开电源,因为如刚 才所述的操作会导致话机本身的程序损坏,进而导致设备无法启动。 警告:请使用设备包装中的电源,因为使用其他没有经过认证的替代电源 适配器有可能对设备造成损害。 墙体支架配件 墙体支架槽与桌 面支架槽 产品概览: 桌面支架 GRP2613是一款新一代企业级IP电话。GRP2613支持6条双 色线路键,这些线路键最多可编辑成24个BLF键或快速拨号 键。GRP2613有2.8英寸 (320x240) LCD显示屏,4个可编辑 应用程序软按键。GRP2613有2个1000Mbps自适应交换式以 太网接口(支持PoE供电),支持EHS功能,以及最多3方会 议,具有优异的高清晰语音质量和丰富完备的电话功能。它支 持自动化的个人多媒体信息服务、自动配置、先进的安全隐私 保护设置。它广泛兼容其它第三方SIP设备及主要SIP/NGN/IMS 平台。对于追求品质的企业用户来说,GRP2613将是理想的选 择。 安装电话 (墙体支架配件*分开出售): 1. 将墙体支架插入电话背面的支架插槽中; 2. 通过墙孔将电话固定在墙上; 3.
电话的配置: 电话的连接: 通过WEB浏览器配置GRP2613: 1. 请确保电话的电源及网络连接; 2. 按住“向上”按钮3秒钟以查看IP地址; 肯辛顿锁孔 耳机 手柄 PC连接端口 网络连接端口 3. 在您电脑浏览器中输入话机IP地址; 4. 输入管理员账号及密码,进入配置页面。(出厂默认用户名为”admin”, 出 场默认随机密码可以在设备背后的贴纸上找到) 。 电源 连线步骤: 1. 用手柄连线连接电话手柄和电话主机; 2. 用网线连接电话的网络接口和外部网络接口(如:集线器或交换机上的 RJ-45网络接口); 3. 用电源适配器连接电话电源接口和交流电源插座; 4. 电话屏幕将会显示设备启动或固件升级信息。请耐心等待至时间/日期显示; 5. 话 机 启 动 后 , 用 户 可 以 在 主 菜 单 或 W E B 浏 览 器 进 一 步 设 置 静 态 I P 或 者 DHCP,从而获得网络连接; 通过键盘配置GRP2613: 产品概览: 1. 确保电话处于空闲状态; 2. 按下菜单/确定按键进入菜单选项; 信息指示灯 线路键 软按键 保持 信息 耳机 4.
ES PRECAUCIONES: El GRP2613 no esta pre-configurado para soportar o realizar llamadas de emergencia a ningún tipo de hospital, agencia policial, unidad de cuidado medico o cualquier otro servicio de emergencia. Es su responsabilidad contratar un servicio de telefonía de Internet compatible con el protocolo SIP, configurar el GRP2613 para utilizar dicho servicio y periódicamente probar esta configuración para confirmar que este trabajando como usted espera.
INSTALACIÓN DEL TELÉFONO: CONECTANDO EL TELÉFONO: Ranuras para soporte y montura de pared Montura de Pared Soporte de Teléfono Instalando El Teléfono (Montura de Pared *Se vende por separado): 1. Inserte la montura de pared en la ranura de atrás del teléfono. 4. Coloque la lengüeta en la misma ranura de tal manera que soporte el auricular (Ver figura abajo).
CONFIGURACIÓN DEL TELÉFONO: Configurando el GRP2613 utilizando un navegador web: 1. Asegure que su teléfono este conectado a la red y tenga electricidad. 2. Presione y mantenga el botón “Arriba” por 3 seg. Para ver la dirección IP. 3. Escriba la dirección IP en su navegador web. 4. Ingrese como administrador para ver el menú de configuración. (El usuario es “admin” y la contraseña aleatoria debería estar en la etiqueta en la parte trasera de la unidad).